lock Seat Alhambra 2005 User Guide

Instrument panel48
If you press the upper part of the button, the different functions will
appear consecutively.
If you press the lower part of the button, the functions will appear
in the opposite direction.
The following data can be obtained in this order by the memory:
• Driving time
• Km driven
• Average speed
• Average fuel consumption
The instantaneous fuel consumption will not be memorized but will
always appear in an updated version.
M Me
em
mo
or
ry
y
Two automaticmemories are fitted:
T Th
he
e iin
nd
di
iv
vi
id
du
ua
al
l mme
em
mo
or
ry
y ((M
Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11)
)
collects the
following data while ignition is on: driving time, kms driven and
fuel consumption.
The calculation of the average speed and average consumption is
based on this data.
If the trip resumes within the 2 following hours from switching off
ignition the new data will be added to the one already memorized.
If the interruption is longer than 2 hours, all data will automatically
be deleted from the memory.T Th
he
e ggl
lo
ob
ba
al
l mme
em
mo
or
ry
y ((M
Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 22)
)
collects all data
from all trips up to 100 driving hours, 10,000 km and 1,000 liters
of fuel consumption. This data is used to calculate the average
speed and average consumption for all individual trips.
In case one of these values is exceeded, the memory is deleted
and a new count starts. As opposed to the individual memory, the
global memory will not be deleted if the trip is interrupted for more
than 2 hours.
T To
o cco
on
ns
su
ul
lt
t
data select the respective memory by pressing the
"Reset"
⇒fig. 48Abutton on the windscreen wiper lever.
The digital clock display will indicate the memory which was
selected:
M Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11 ––
(Individual memory)
M Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 22 ––
(Global memory)
D De
el
le
et
te
e mme
em
mo
or
ri
ie
es
s
If you press the "Reset"
⇒fig. 48Abutton for more than two
seconds the selected memory will be deleted.
If the battery of the vehicle is disconnected both memories will be
deleted.
V Vi
is
su
ua
al
li
iz
ze
ed
d iin
nf
fo
or
rm
ma
at
ti
io
on
n
When the ignition is switched on the last selected function or the
outside temperature with the ice symbol (warning for icy road) will
appear on the display.


Instrument panel49
Safety FirstControls and equipment Tips and Maintenance Technical Data
N No
o ssy
ym
mb
bo
ol
l -- TTi
im
me
e
The time appears even if the ignition is switched off.
The clock is set by turning the button next to the rev counter in the
instrument panel
⇒page 46 "Digital clock".
° °C
C -- OOu
ut
ts
si
id
de
e tte
em
mp
pe
er
ra
at
tu
ur
re
e
The temperature range goes from –40°C to +58°C. If the car is
stationary or if driving at slow speed the indicated temperature
may be slightly higher than the real temperature due to engine
heat.
If the outside temperature is between +4°C and –7°C the ice
symbol will appear on the display (warning for icy road).
This symbol will flash at first for about 5 seconds and then remain
lit while the outside temperature is not above +4°C or below –7°C.
W Wh
he
en
n tth
he
e ssy
ym
mb
bo
ol
l ffo
or
r iic
cy
y rro
oa
ad
ds
s aap
pp
pe
ea
ar
rs
s tth
he
e mmu
ul
lt
ti
i-
-f
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r
a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y iin
nd
di
ic
ca
at
te
es
s tth
he
e oou
ut
ts
si
id
de
e tte
em
mp
pe
er
ra
at
tu
ur
re
e ((w
wa
ar
rn
ni
in
ng
g ffo
or
r iic
cy
y
r ro
oa
ad
ds
s)
),
, rre
eg
ga
ar
rd
dl
le
es
ss
s oof
f tth
he
e sse
el
le
ec
ct
te
ed
d ffu
un
nc
ct
ti
io
on
n.
.If you wish to see the previously selected function press the
⇒fig.
48Bbutton on the windscreen wiper lever.
l l/
/1
10
00
0 kkm
m -- IIn
ns
st
ta
an
nt
ta
an
ne
eo
ou
us
s ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
Instantaneous consumption is shown in l/100 km. The computer
calculates the consumption every 30 meters. When the vehicle is
stationary the computer will display the last value in the memory.
On some models, the display will show fuel consumption in
ltr/hour when the vehicle is in a stationary position with the engine
running.
If the instantaneous consumption display is selected when the
engine is started, the computer will indicate the average
consumption for the first 30 to 40 meters.
You can use this display to adjust your driving style to the desired
fuel consumption.
Ø Ø ll/
/1
10
00
0 kkm
m -- AAv
ve
er
ra
ag
ge
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
This mode shows the average fuel consumption only and not the
consumption at the time of reading.
Once the memory is deleted the display will show the average
consumption after approximately 30 meters. Until then, the display
will show dashes instead of the value. The value is updated
throughout the trip every 5 seconds.
If you select the individual memory( (M
Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11)
)
the
average consumption of a particular trip is displayed.

I In
n cca
as
se
e tth
hi
is
s ssy
ym
mb
bo
ol
l iis
s uus
se
ed
d aas
s aan
n iin
nd
di
ic
ca
at
ti
io
on
n ffo
or
r iic
cy
y rro
oa
ad
ds
s,
, kke
ee
ep
p iin
n mmi
in
nd
d tth
ha
at
t
t th
he
e rro
oa
ad
d mma
ay
y cco
on
nt
ti
in
nu
ue
e tto
o bbe
e iic
cy
y eev
ve
en
n iif
f tth
he
e tte
em
mp
pe
er
ra
at
tu
ur
re
e iis
s aar
ro
ou
un
nd
d ++4
4°
°C
C.
.
W
WA
AR
RN
NI
IN
NG
G

Instrument panel52
Mileage clock/Trip mileage
The upper counter registers the total distance driven and the lower
one the short trips.
The last figure of the lower counter indicates 100 m.
The trip mileage can be put back to zero by pressing the reset knob
⇒fig. 46Bnext to the speedometer.K
Service interval indicator*
If a service is due, the word "Service" will flash for about 20
seconds when the engine is switched on, the vehicle is not moving
and the mileage clock reset button is not touched.
The deadline for any service will be displayed 3,000 km in
advance.
• • IIn
nt
te
er
rm
mi
it
tt
te
en
nt
t sse
er
rv
vi
ic
ce
e*
* ffo
or
r 220
0 sse
ec
co
on
nd
ds
s
. Indicates that the time for a
new service has elapsed.
• • SSe
er
rv
vi
ic
ce
e KKm
m 33,
,0
00
00
0*
* ffo
or
r 220
0 sse
ec
co
on
nd
ds
s
. Indicates that the next service
is due in 3,000 km. Every 100 km the number of km will decrease
by 100 km up to the indication "Service".
A Af
ft
te
er
r tth
he
e sse
er
rv
vi
ic
ce
e hha
as
s bbe
ee
en
n ppe
er
rf
fo
or
rm
me
ed
d tth
he
e ddi
is
sp
pl
la
ay
y nne
ee
ed
ds
s tto
o bbe
e
r re
es
se
et
t.
.
The display will be reset by a Technical Service Centre as follows:
• With the ignition switched off, press and hold the trip meter reset
button below the speedometer.• Switch ignition on and release the reset button. The display will
show the next service.
• Turn the minute button of the digital clock to the right.
• Switch ignition off. Now the service indicator has been set to
zero.
T Th
he
e sse
er
rv
vi
ic
ce
e iin
nd
di
ic
ca
at
to
or
r cca
an
nn
no
ot
t bbe
e cco
om
mp
pl
le
et
te
el
ly
y sse
et
t tto
o zze
er
ro
o.
. IIt
t cca
an
n oon
nl
ly
y
b be
e sse
et
t tto
o 115
5,
,0
00
00
0 kkm
m.
.
N No
ot
te
e• Do not zero the display between the Service intervals. Otherwise an
incorrect reading will be shown.
• If the battery is disconnected the details in the service displayare
retained.
• If the instrument panel changes due to repair, the service interval display
must be reset. This should be carried out by a Technical Service Centre.
Should the display not be reprogrammed, then the service work should be
carried out in accordance with the Inspection and Maintenance Plan and not
according to the Service Interval Display. The Service interval indicator only
becomes valid again after carrying out an inspection and resetting the
indicator.
F Fa
au
ul
lt
t iin
nd
di
ic
ca
at
to
or
r
If a failure occurs, "FAIL" would appear either on the instrument
panel or the trip meter. The defect should be repaired by a
Technical Service Centre as soon as possible.
K

Instrument panel53
Safety FirstControls and equipment Tips and Maintenance Technical Data
Speedometer
The speedometer is fitted with a digital mileage clock and a trip
mileage clock as well as a service interval indicator* and outside
temperature*.
During the running-in period the instructions in the chapter "The
first 1,500 kilometres and afterwards" should be noted.
K
Voltmeter
The voltmeter shows the voltage of the vehicle’s electrical
installation. T Th
he
e nno
or
rm
ma
al
l rre
ea
ad
di
in
ng
g lli
ie
es
s bbe
et
tw
we
ee
en
n 112
2 aan
nd
d 115
5 VV.
. IIf
f tth
he
e
v vo
ol
lt
ta
ag
ge
e ffa
al
ll
ls
s bbe
el
lo
ow
w 112
2 VV wwi
it
th
h tth
he
e een
ng
gi
in
ne
e rru
un
nn
ni
in
ng
g,
, hha
av
ve
e tth
he
e ppo
ow
we
er
r
s su
up
pp
pl
ly
y ((b
ba
at
tt
te
er
ry
y aan
nd
d gge
en
ne
er
ra
at
to
or
r)
) cch
he
ec
ck
ke
ed
d aat
t aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e
C Ce
en
nt
tr
re
e
⇒"
"W
Wa
ar
rn
ni
in
ng
g lla
am
mp
ps
s"
" cch
ha
ap
pt
te
er
r.
.
During engine starting the voltage can fall below 8 V.
K
220
260
240
88
AL0-074Fig. 51

Instrument panel57
Safety FirstControls and equipment Tips and Maintenance Technical Data
I It
te
em
mS
Sy
ym
mb
bo
ol
lM
Me
ea
an
ni
in
ng
g oof
f wwa
ar
rn
ni
in
ng
g aan
nd
d cco
on
nt
tr
ro
ol
l lla
am
mp
ps
sF
Fu
ur
rt
th
he
er
ri
in
nf
fo
or
rm
ma
at
ti
io
on
n
1Air Bag⇒page 58
2Trailer turn signals*⇒page 58
3Cruise control*⇒page 58
4Selector lever lock⇒page 58
5Rear fog light⇒page 58
6Diesel pre-heating system⇒page 58
7Turn signals⇒page 58
8Engine failure*⇒page 59
9Main beam⇒page 59
10Diagnosis/excess pollution*⇒page 59
11Wheel spin regulator (TCS)⇒page 59
11Electronic stability program* (ESP)⇒page 59
12Anti-locking brake system ABS*⇒page 59
I It
te
em
mS
Sy
ym
mb
bo
ol
lM
Me
ea
an
ni
in
ng
g oof
f wwa
ar
rn
ni
in
ng
g aan
nd
d cco
on
nt
tr
ro
ol
l lla
am
mp
ps
sF
Fu
ur
rt
th
he
er
ri
in
nf
fo
or
rm
ma
at
ti
io
on
n
13Electronic immobilizer*⇒page 60
14Brakes/Hand brake⇒page 60
15Alternator⇒page 61
16Seat belt warning lamp*⇒page 61
17Fuel reserve*⇒page 61
18Headlight failure*⇒page 61
19Open bonnet/tailgate warning lamp*⇒page 61
20Windscreen washer fluid level*⇒page 62
21Open doors warning lamp*⇒page 62
22Brake pad wear monitor*⇒page 62
23Engine oil pressure/level*⇒page 62
24Coolant temperature/level⇒page 63K

Instrument panel58
Air Bag
The warning lamp lights for a few seconds when switching on the
ignition. If the passenger’s Air Bag is deactivated the warning lamp
will flash for approximately 12 seconds
⇒chapter "Air Bag
system”.
If the warning lamp does not go out, lights up or flashes while
driving it indicates that Air Bag is not in order. Proceed
immediately to a Technical Service Centre to have it checked.
K
Trailer turn signals*
The warning lamp* flashes when turn signals are switched on
while towing a trailer.
If a turn signal fails on the trailer or vehicle, the warning lamp does
not flash.
K
Cruise control*
The warning lamp flashes if the cruise control is switched on. For
more information see the "Cruise control" chapter.
K
Selector lever lock
The warning lamp lights up when the selector lever is in position P
and N. To unlock it is necessary to press the brake pedal
⇒chapter
"Automaticgear".
K
Rear fog light
The warning lamp lights up when the rear fog light is switched on.
For more details
⇒"Switches" chapter.K
Pre-heating system
(Diesel engines only)
The warning lamp lights up when the ignition is switched on and
the engine is cold.
If the warning lamp does not light up there is a failure in the pre-
heating system. Seek expert help.
Start the engine once the warning lamp goes out
⇒"Starting
engine" chapter.
If the engine isa at
t oop
pe
er
ra
at
ti
io
on
na
al
l tte
em
mp
pe
er
ra
at
tu
ur
re
e
, the warning lamp does
not come on; you can drive immediately.
If there was an engine failure in the diesel engine while driving, the
warning lamp would flash. The engine must be checked as soon as
possible by a Technical Service Centre.
K
Turn signals
The warning lamp flashes at the same time as the indicator. If a
turn signal fails the warning lamp flashes approximately twice as
fast. Not applicable when towing a trailer.
For more details
⇒"Indicators and dipped beam lever" chapter.K

Instrument panel59
Safety FirstControls and equipment Tips and Maintenance Technical Data
Engine failure*
P Pe
et
tr
ro
ol
l een
ng
gi
in
ne
e
D Di
ie
es
se
el
l een
ng
gi
in
ne
e
If there was an engine failure while driving, the corresponding
warning lamp would light (petrol engine) or would start to flash
(diesel engine). The engine must be checked as soon as possible
by a Technical Service Centre.
K
Main beam
The warning lamp comes on when the beam is on or when the
headlight flasher is used.
K
Diagnosis*
The warning lamp will flash in the event of a breakdown in the
petrol engine’s electrical system while driving. The engine must be
checked as soon as possible by a Technical Service Centre.
K
Wheel spin regulator of the driving wheels (TCS)
The warning lamp comes on when the ignition is switched on, and
should go out after about 2 seconds.
If the TCS works while the vehicle is in motion, the warning lamp
flashes.
If the system is disconnected or has a fault, the warning lamp will
stay on.As the TCS works in combination with the ABS, if the ABS breaks
down the TCS warning lamp also comes on.
For more information see page 164.
K
Electronic stability program (ESP)*
The warning lamp comes on when the ignition is switched on, and
should go out after about 2 seconds.
If the ESP works while the vehicle is in motion, the warning lamp
flashes.
If the system is disconnected or has a fault, the warning lamp will
stay on.
As the ESP works in combination with the ABS, if the ABS breaks
down the ESP warning lamp also comes on.
For more information see page 165.
K
Anti-locking brake system (ABS)*
This warning lamp monitors the ABS and EDS* systems.
A An
nt
ti
i-
-l
lo
oc
ck
k bbr
ra
ak
ke
e ssy
ys
st
te
em
m ((A
AB
BS
S)
)*
*
The warning lamp comes on for a few seconds when the ignition is
switched on or the engine started. The lamp goes out after an
automatictest sequence has been completed.
If the ABS warning lamp does not come on when the ignition is
switched on, does not go out or comes on when driving, the
system is faulty.


Instrument panel60
A fault in the ABS system is indicated as follows:
• I If
f tth
he
e AAB
BS
S wwa
ar
rn
ni
in
ng
g lla
am
mp
p lli
ig
gh
ht
ts
s uup
p
, the vehicle can still be braked
with normal braking system but without ABS. W We
e rre
ec
co
om
mm
me
en
nd
d
c co
on
nt
ta
ac
ct
ti
in
ng
g aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e aas
s sso
oo
on
n aas
s ppo
os
ss
si
ib
bl
le
e.
.
• I If
f tth
he
e AAB
BS
S wwa
ar
rn
ni
in
ng
g lla
am
mp
p lli
ig
gh
ht
ts
s uup
p tto
og
ge
et
th
he
er
r wwi
it
th
h bbr
ra
ak
ke
e ssy
ys
st
te
em
m
w wa
ar
rn
ni
in
ng
g lla
am
mp
p.
.
Not only is the ABS system defective but ac ch
ha
an
ng
ge
e
i in
n nno
or
rm
ma
al
l bbr
ra
ak
ki
in
ng
g cch
ha
ar
ra
ac
ct
te
er
ri
is
st
ti
ic
cs
s cca
an
n aal
ls
so
o bbe
e eex
xp
pe
ec
ct
te
ed
d.
.
For more information on the ABS system
⇒page 162.
E El
le
ec
ct
tr
ro
on
ni
ic
c DDi
if
ff
fe
er
re
en
nt
ti
ia
al
l LLo
oc
ck
k ((E
ED
DL
L)
)*
*
The EDL system works in conjunction with the ABS. T Th
he
e vve
eh
hi
ic
cl
le
e
s sh
ho
ou
ul
ld
d bbe
e tta
ak
ke
en
n tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e aas
s sso
oo
on
n aas
s ppo
os
ss
si
ib
bl
le
e
.
For more information on the EDS system
⇒page 164.K
Electronic immobilizer*
When switching the ignition on, the data from the vehicle key is
automatically processed. The warning lamp will flash to confirm
that the data is being compared.
If a non-authorized key is used the warning lamp will flash
permanently. The ignition will not work
⇒"Keys" chapter.K
Brakes/Hand brake
The warning lamp must come on if
• the hand brake is set
If you drive with the hand brake set at more than 6 km/h an
acoustic warning signal will sound.
• the brake fluid level is too low
The ignition must be switched on.
In vehicles with anti-lock system* (ABS), the warning lamp comes
on for a few seconds after switching on the ignition or after starting
the engine. If the ABS* system was faulty the brake warning lamp
would also come on together with the ABS.I If
f bbo
ot
th
h wwa
ar
rn
ni
in
ng
g lla
am
mp
ps
s cco
om
me
e oon
n,
, sst
to
op
p tth
he
e vve
eh
hi
ic
cl
le
e aan
nd
d cch
he
ec
ck
k tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d
i in
n tth
he
e dde
ep
po
os
si
it
t.
. IIf
f tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d lle
ev
ve
el
l iis
s bbe
el
lo
ow
w tth
he
e ""M
MI
IN
N"
" mma
ar
rk
k,
, ddo
o nno
ot
t ddr
ri
iv
ve
e
v ve
eh
hi
ic
cl
le
e aan
nd
d sse
ee
ek
k eex
xp
pe
er
rt
t aas
ss
si
is
st
ta
an
nc
ce
e.
. IIf
f tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d lle
ev
ve
el
l iis
s cco
or
rr
re
ec
ct
t,
, tth
he
e
d de
ef
fe
ec
ct
t mma
ay
y bbe
e ffo
ou
un
nd
d iin
n tth
he
e AAB
BS
S.
. IIf
f tth
he
e AAB
BS
S rre
eg
gu
ul
la
at
ti
in
ng
g ssy
ys
st
te
em
m ffa
ai
il
ls
s,
, tth
he
e rre
ea
ar
r
w wh
he
ee
el
ls
s mma
ay
y qqu
ui
ic
ck
kl
ly
y llo
oc
ck
k wwh
hi
il
le
e bbr
ra
ak
ki
in
ng
g aan
nd
d,
, uun
nd
de
er
r cce
er
rt
ta
ai
in
n cci
ir
rc
cu
um
ms
st
ta
an
nc
ce
es
s,
,
c ca
au
us
se
e tth
he
e rre
ea
ar
r oof
f tth
he
e vve
eh
hi
ic
cl
le
e tto
o ssp
pi
in
n oou
ut
t.
.
P Pr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e wwh
hi
il
le
e eex
xe
er
rc
ci
is
si
in
ng
g eex
xt
tr
re
em
me
e
c ca
au
ut
ti
io
on
n tto
o hha
av
ve
e tth
he
e ffa
au
ul
lt
t rre
ep
pa
ai
ir
re
ed
d.
.
W
WA
AR
RN
NI
IN
NG
G
I If
f yyo
ou
u rre
el
le
ea
as
se
e tth
he
e hha
an
nd
d bbr
ra
ak
ke
e aan
nd
d tth
he
e bbr
ra
ak
ke
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p ddo
oe
es
s nno
ot
t ggo
o oou
ut
t
o or
r cco
om
me
es
s oon
n wwh
hi
il
le
e ddr
ri
iv
vi
in
ng
g tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d lle
ev
ve
el
l iin
n tth
he
e dde
ep
po
os
si
it
t iis
s tto
oo
o llo
ow
w.
.
S St
to
op
p tth
he
e vve
eh
hi
ic
cl
le
e iim
mm
me
ed
di
ia
at
te
el
ly
y aan
nd
d gge
et
t eex
xp
pe
er
rt
t aas
ss
si
is
st
ta
an
nc
ce
e bbe
ef
fo
or
re
e yyo
ou
u
c co
on
nt
ti
in
nu
ue
e ddr
ri
iv
vi
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G


Opening and closing72
N No
ot
te
e
There are electronic components in the key and remote control. Protect the
keys from moisture and excessive vibration.K
Electronic immobilizer
The immobilizer prevents unauthorized persons using your vehicle.
A micro-chip is located in the head of the key which automatically
deactivates the immobilizer when the key is inserted in the ignition
lock.
The system is automatically activated when the ignition is switched
off.
N No
ot
te
e
The engine can thus only be started with a correctly coded Genuine SEAT
key.
Trouble free operation of your vehicle can only be guaranteed when using
genuine keys.
K
K Ke
ey
ys
s wwi
it
th
h rre
em
mo
ot
te
e cco
on
nt
tr
ro
ol
l*
*
Vehicles with a remote control have two keys, one a folding key,
and the other a fixed key
⇒fig. 59.
N No
ot
te
e
In some model versions the remote control key can be folded. Its
functioning, as far as the remote control, is identical to the keyswith remote
control
⇒"Radio-frequency remote control key" chapter.K
Fig. 60LEO-005

Opening and closing73
Safety FirstControls and equipment Tips and Maintenance Technical Data
Foldable key*
T To
o uun
nf
fo
ol
ld
d
the key sword, press button A. It will unfold with a
spring.
T To
o ffo
ol
ld
d
the key sword, press button
Aand guide it with your hand
until it is completely folded.
K
D Do
oo
or
rs
s,
, cce
en
nt
tr
ra
al
l llo
oc
ck
ki
in
ng
g*
*
Locking and unlocking the vehicle
When the front doors are locked or unlocked, all the other doors,
the tank flap and the tailgate are locked or unlocked by the central
locking system.
The central locking system is equipped with an added security
mechanism: Once the vehicle has been locked from the outside,
the internal door locking levers can immediately be moved freely.
In other words they are disengaged from the outside handles. The
doors can no longer be opened from the inside. This makes
breaking in difficult.
The system may be activated from outside both with the key and
the radio-frequency remote control*.
The warning lamp on the driver’s door covering will begin to f fl
li
ic
ck
ke
er
r
to show that the security system is activated.
K
Unlocking
To unlock the vehicle, turn the key in a front door or the tailgate
lock to the open position.
N No
ot
te
e
When you open the vehicle the inside lights in door contact position will
come on for about 20 seconds.
If the central locking should fail, all locks – with the exception of the tank
flap – can be operated normally. (If the car was simply locked, simply turn
the key twice in the door locks). Tank flap emergency release
⇒page 158.
Fig. 61
A
LEO-006