lights Seat Alhambra 2005 Owner's Guide

Lights and visibility96
L
Li
ig
gh
ht
ts
s
Indicators and dipped beam lever
The turn signals only work when the ignition is switched on.
Right turn signals – lever up
1
Left turn signals – lever down 2
When turn signals are working, the warning lamp flashes as well⇒
"Warning lamps" chapter.
The turn signals switch off automatically when the steering wheel
returns to its normal position.T To
o ssi
ig
gn
na
al
l aa lla
an
ne
e cch
ha
an
ng
ge
e
Move the lever up
1or down 2to the pressure point and hold in
this position – the warning lamp should flash at the same time.
H He
ea
ad
dl
li
ig
gh
ht
t ffl
la
as
sh
he
er
r
Pull the lever towards the steering wheel
3– the main beam
warning lamp will light up.
S Sh
ho
or
rt
t oor
r llo
on
ng
g bbe
ea
am
ms
s
With the long or short beam connected push the lever towards the
steering wheel
4. When main beam is on, the main beam warning
lamp will light up.
P Pa
ar
rk
ki
in
ng
g lli
ig
gh
ht
ts
s*
*
The parking lights only work when ignition is switched off.
Right parking lights – lever up
1
Left parking lights – lever down 2
If the ignition key has been removed, a buzzer* will sound when
the driver’s door is open.
N No
ot
te
e
The use of the signals and lighting described here is subject to local
regulations.K
1
24
3
TO8-016AFig. 80

Lights and visibility97
Safety FirstControls and equipment Tips and Maintenance Technical Data
I
In
nt
te
er
ri
io
or
r lli
ig
gh
ht
ts
s
Front interior lightA
V
Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h ssl
li
id
di
in
ng
g rro
oo
of
f:
:
• Switch pressed on left – light permanently on
• Switch in centre position – controlled by door contacts
• Switch pressed on right – light off
Interior lights with time delayed switch off* remain on for about
12 seconds after doors are closed. If the ignition is switched on
during this period, these interior lights go out immediately.V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
ho
ou
ut
t ssl
li
id
di
in
ng
g rro
oo
of
f:
:
• Switch pressed on right – light permanently on
• Switch in centre position – light off
• Switch pressed on left – controlled by door contacts
Interior lights with time delayed switch off* remain on for about20
seconds after doors are closed. If the ignition is switched on during
this period, these interior lights go out immediately.
K
Front reading light* B
V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h ssl
li
id
di
in
ng
g rro
oo
of
f:
:
• Switch pressed on left – light off
• Switch pressed on right – light on
V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
ho
ou
ut
t ssl
li
id
di
in
ng
g rro
oo
of
f:
:
• Switch pressed on left – light on
• Switch pressed on right – light off
K
Fig. 81
AB
B7M-0017

Lights and visibility98
Interior light
I
In
nt
te
er
ri
io
or
r lli
ig
gh
ht
t ppe
er
rm
ma
an
ne
en
nt
tl
ly
y ssw
wi
it
tc
ch
he
ed
d oof
ff
f
• In switch position
1, the interior and reading lights are switched
off.
S Sw
wi
it
tc
ch
hi
in
ng
g oon
n tth
he
e rre
ea
ad
di
in
ng
g lli
ig
gh
ht
t
• Turn the switch to position
2(left reading light) or to position 4
(right reading light).
D Do
oo
or
r lli
ig
gh
ht
t ppo
os
si
it
ti
io
on
n
• Turn the switch to position
3. The interior lights are
automatically switched on when the vehicle is unlocked or the key
removed from the ignition lock. The light turns off about 20
seconds after the closure of the doors. The interior lights are
switched off when the vehicle is locked or when the ignition is
switched on.I In
nt
te
er
ri
io
or
r lli
ig
gh
ht
ts
s oor
r bbo
ot
th
h rre
ea
ad
di
in
ng
g lli
ig
gh
ht
ts
s ssw
wi
it
tc
ch
he
ed
d oon
n
• Turn the control to position
5.K
Lights next to the roof handle*
To turn on press the glass of the light on the lower edge.
To turn off press the light in the opposite direction.
K
Luggage compartment light
The light comes on when tailgate is opened (even when lighting
and ignition is switched off). It is therefore essential to ensure that
the tailgate is always closed when vehicle is parked.
K
AL0-024
C
3
1
2
5
4
Fig. 82
Fig. 83

Lights and visibility99
Safety FirstControls and equipment Tips and Maintenance Technical Data
W
Wi
in
nd
ds
sc
cr
re
ee
en
n wwa
as
sh
he
er
rs
s
Front windscreen wipers
Wipers and washers only work when ignition is switched on.
C Ca
au
ut
ti
io
on
n
When it is freezing, check that the wiper blades are not frozen to the glass
before switching the wipers on for the first time.
The heated windscreen washer jets* are switched on when the
ignition is switched on and the amount of heat is regulated
automatically according to the outside temperature
N No
ot
te
e
• Topping up washer fluid ⇒"Windscreen washer" chapter.
• Changing windscreen wiper blades
⇒"Windscreen wiper blades" chapter.
W Wi
in
nd
ds
sc
cr
re
ee
en
n
• • WWi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
rs
s oof
ff
f
Lever at position
0.
• • IIn
nt
te
er
rm
mi
it
tt
te
en
nt
t wwi
ip
pe
e
Lever at position
1.
Use lever
Ato change the intervals of the intermittent wipe. Four
levels are available.
Lever to the right – brief intervals
Lever to the right – long intervals
The intervals of each level are determined by the speed of the
vehicle.
• • WWi
ip
pe
er
r ssl
lo
ow
w
Lever at position
2.
• • WWi
ip
pe
er
r ffa
as
st
t
Lever at position
3.
• • FFl
li
ic
ck
k wwi
ip
pe
e
Lever at position
4.
Fig. 84
A
0
1
2
3
45
LEO-027
T Th
he
e wwi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
rs
s mmu
us
st
t bbe
e iin
n vve
er
ry
y ggo
oo
od
d cco
on
nd
di
it
ti
io
on
n tto
o een
ns
su
ur
re
e ccl
le
ea
ar
r
v vi
is
si
ib
bi
il
li
it
ty
y ⇒"
"W
Wi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
r bbl
la
ad
de
es
s"
" cch
ha
ap
pt
te
er
r.
.
W
WA
AR
RN
NI
IN
NG
G

Lights and visibility100
•
• AAu
ut
to
om
ma
at
ti
ic
c wwa
as
sh
h/
/w
wi
ip
pe
e ffa
ac
ci
il
li
it
ty
y
To turn on wipers and washer, pull lever towards steering wheel to
position
5.
Release lever – The washer stops and the wipers carry on for about
4 seconds.
K
Rain sensor*
If the vehicle is fitted with a rain sensor and the intermittent wipe
is activated this sensor is in charge of adjusting automatically the
duration of the intervals to the amount of rain.
Position
Aof the lever for the windscreen wipers is used to
individually adjust the sensitivity of the rain sensor.
After switching off the ignition, the rain sensor needs to be
switched on again. To do that the intermittent wipe needs to be
switched off and switched on again.
K
Rear windscreen
• • IIn
nt
te
er
rm
mi
it
tt
te
en
nt
t wwi
ip
pe
e
T Tu
ur
rn
n oon
n:
:
Push lever to position
6.
The wipers wipe approximately every 6 seconds.
T Tu
ur
rn
n oof
ff
f:
:
Move the lever towards the steering wheel. If you turn off the
windscreen wiper while wiping, the windscreen wiper will function
until the wipe is completed.
7
6
LEO-012Fig. 85


• • AAu
ut
to
om
ma
at
ti
ic
c wwa
as
sh
h/
/w
wi
ip
pe
e ffa
ac
ci
il
li
it
ty
y
T Tu
ur
rn
n oon
n:
:
Push the lever forward to position
7⇒ fig. 85.
The washer/wipe facility keeps working intermittently. To turn off
completely move the lever towards the steering wheel.
K
Headlight washer system*
When the main or dipped beam is on, the lenses are washed every
time the windscreen is washed.
At regular intervals, such as when filling the tank, the dirt on the
lenses (insects) should be removed.
K
W Wi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
r bbl
la
ad
de
es
s
Observations
C
Ca
au
ut
ti
io
on
n
When it is freezing, check that the wiper blades are not frozen to the glass
before switching the wipers on for the first time.
If the wiper blades drag, it may be caused by various things:
• If the vehicle has been washed in an automatic car wash,
residual wax may be left on the windscreen.
Filling the windscreen washer container with a window cleaner
containing a wax remover can cure the problem.
• Damaged wiper blades can lead to dragging. In this case the
blades should be renewed.
• The blades are set at an incorrect angle.
Have the angle checked and, if necessary, adjusted by a Technical
Service Centre.
K
Lights and visibility101
Safety FirstControls and equipment Tips and Maintenance Technical Data
•
• FFo
or
r ccl
le
ea
ar
r vvi
is
si
io
on
n,
, iit
t iis
s iim
mp
pe
er
ra
at
ti
iv
ve
e tth
ha
at
t tth
he
e wwi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
r bbl
la
ad
de
es
s aar
re
e iin
n
g go
oo
od
d cco
on
nd
di
it
ti
io
on
n.
.
• • IIn
n oor
rd
de
er
r tto
o ppr
re
ev
ve
en
nt
t sst
tr
re
ea
ak
ks
s oon
n tth
he
e wwi
in
nd
ds
sc
cr
re
ee
en
n,
, yyo
ou
u ssh
ho
ou
ul
ld
d ccl
le
ea
an
n tth
he
e
w wi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
r bbl
la
ad
de
es
s rre
eg
gu
ul
la
ar
rl
ly
y wwi
it
th
h aa wwi
in
nd
do
ow
w ccl
le
ea
an
ne
er
r.
. IIf
f tth
he
e wwi
in
nd
do
ow
ws
s
a ar
re
e ppa
ar
rt
ti
ic
cu
ul
la
ar
rl
ly
y ddi
ir
rt
ty
y,
, ee.
.g
g.
. iin
ns
se
ec
ct
t rre
em
ma
ai
in
ns
s,
, aa ssp
po
on
ng
ge
e oor
r ccl
lo
ot
th
h ssh
ho
ou
ul
ld
d bbe
e uus
se
ed
d
t to
o ccl
le
ea
an
n tth
he
e bbl
la
ad
de
es
s.
.
• • CCh
ha
an
ng
ge
e tth
he
e wwi
ip
pe
er
r bbl
la
ad
de
es
s oon
nc
ce
e oor
r ttw
wi
ic
ce
e aa yye
ea
ar
r ffo
or
r ssa
af
fe
et
ty
y rre
ea
as
so
on
ns
s.
. WWi
ip
pe
er
r
b bl
la
ad
de
es
s mma
ay
y bbe
e ppu
ur
rc
ch
ha
as
se
ed
d ffr
ro
om
m TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
es
s.
.
W
WA
AR
RN
NI
IN
NG
G

Lights and visibility102
Changing wiper blades
Lift the wiper arm up and rotate it so that the blade is
perpendicular to the wiper. Next, remove it in the direction of the
arrow and replace.
K
R Re
ea
ar
r-
-v
vi
ie
ew
w mmi
ir
rr
ro
or
rs
s
Adjusting mirrors
Mirrors should be adjusted before beginning a journey in order to
guarantee good visibility.
K
Anti-dazzle interior mirror
The lever on the lower edge of the mirror should be pointing to the
rear when the basicsetting is made.
To set the anti-dazzle position, pull lever forwards.
E Ex
xt
te
er
ri
io
or
r mmi
ir
rr
ro
or
rs
s cco
on
nt
tr
ro
ol
ll
le
ed
d mme
ec
ch
ha
an
ni
ic
ca
al
ll
ly
y ffr
ro
om
m iin
ns
si
id
de
e
are adjusted
with the knob in the door trim panel.
K
Automatic* anti-dazzle mirror
Adjust interior mirror by hand.
If the ignition is switched on the interior mirror automatically
darkens depending on the light from behind (i.e. a headlight).
When you engage the reverse gear or put the selector lever on R R
the mirror returns to its original position (is no longer dark).
K
AL0-155Fig. 86

Lights and visibility103
Safety FirstControls and equipment Tips and Maintenance Technical Data
Electrically adjustable mirrors
Electrically adjustable mirrors are set by pressing the edge of the
knob Ain the driver’s door trim.
The surface of the mirror may be angled upwards, downwards, to
the left or the right, as required.
With swivel knob
Aselect the driver or passenger wing mirrors.
0 0
– Neutral position
L L
– Driver’s mirror
R R
– Passenger’s mirrorWhen you adjust the l le
ef
ft
t
mirror the right one moves in time, and a
separate adjustment of the right mirror should not normally be
necessary. If you wish to adjust it separately, activate the right
mirror. You should now be able to adjust it.
If the electric adjustment fails, the mirrors can be adjusted
manually by pressing on the surface.
K
Setting the outside mirrors
A Au
ut
to
om
ma
at
ti
ic
c aan
nt
ti
i-
-d
da
az
zz
zl
le
e mmi
ir
rr
ro
or
r*
*
When the ignition is on the mirrors darken automatically according
to the amount of light reflecting from behind (e.g.: a flood light).
When shifting into reverse gear or placing the selector lever in R R
,
the mirrors will return to the original position (they are not dark
anymore).
N No
ot
te
e ffo
or
r vve
eh
hi
ic
cl
le
es
s wwi
it
th
h cco
on
nv
ve
ex
x oor
r aas
sp
ph
he
er
ri
ic
ca
al
l oou
ut
ts
si
id
de
e mmi
ir
rr
ro
or
rs
s*
*
C Co
on
nv
ve
ex
x
(curved outwards) mirrors enlarge the field of view but they
make objects look smaller. T Th
he
es
se
e mmi
ir
rr
ro
or
rs
s aar
re
e oon
nl
ly
y oof
f lli
im
mi
it
te
ed
d uus
se
e iin
n
e es
st
ti
im
ma
at
ti
in
ng
g hho
ow
w ffa
ar
r aaw
wa
ay
y aa ffo
ol
ll
lo
ow
wi
in
ng
g vve
eh
hi
ic
cl
le
e iis
s.
.
A As
sp
ph
he
er
ri
ic
ca
al
l
exterior mirrors have a mirror surface with different
curvature. This wide-angle mirror increases the area of vision even
more so than conventional convex mirrors.T Th
he
ei
ir
r uus
se
ef
fu
ul
ln
ne
es
ss
s iis
s aal
ls
so
o
l li
im
mi
it
te
ed
d wwh
he
en
n jju
ud
dg
gi
in
ng
g tth
he
e ddi
is
st
ta
an
nc
ce
e tto
o vve
eh
hi
ic
cl
le
es
s aap
pp
pr
ro
oa
ac
ch
hi
in
ng
g ffr
ro
om
m
b be
eh
hi
in
nd
d.
.
K
Fig. 87
A
AL0-007

Lights and visibility104
Mirror heating
The electrically operated outside mirrors are heated as long as the
heated rear window is switched on. The ignition must be switched
on for this purpose.
K
Electric folding wing mirrors
Use controlAto select the passenger or driver’s wing mirror, or
the fold-away function, as well as mirror adjustment
⇒ fig. 88.
0 0
– Neutral position
L L
– Passenger’s wing mirror
R R
– Driver’s wing mirror
– Folding away of wing mirrorsThe fold-away position is recommended, for example, when
parking or driving in cramped conditions.
To f fo
ol
ld
d aaw
wa
ay
y tth
he
e wwi
in
ng
g mmi
ir
rr
ro
or
rs
s
, starting from positionsL L
, R R
or 0 0
,
select positions with control
A.
T To
o uun
nf
fo
ol
ld
d tth
he
e wwi
in
ng
g mmi
ir
rr
ro
or
rs
s ((u
us
se
e ppo
os
si
it
ti
io
on
n)
)
, do the opposite, from
to L L
, R R
or 0 0
.
N No
ot
te
e
• Before putting the vehicle through an automatic washing plant, the
mirrors should be folded in to prevent them becoming damaged.
• If the mirror housing is moved by an external force (e.g. knocked when
manoeuvring) the mirrors must be folded right in electrically. U Un
nd
de
er
r nno
o
c ci
ir
rc
cu
um
ms
st
ta
an
nc
ce
es
s mmu
us
st
t tth
he
e mmi
ir
rr
ro
or
r
housing be adjusted by hand as the
operation of the mirror might be affected. To place the mirrors in use
position, using control
A, they will not work for about 15 seconds.
Be careful not to damage the mirrors when using control
A.KA
L
O
R
AL0-090Fig. 88

Driving143
Safety FirstControls and equipment Tips and Maintenance Technical Data
D Dr
ri
iv
vi
in
ng
g
M
Ma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x
Driving a car with a manual gearbox
Only engage reverse gear when the vehicle is stationary. When the
engine is running, depress the clutch fully and wait a few seconds
before moving the gear lever. This will prevent grating noises. To
engage reverse gear, pull the safety ring A up slightly and guide
the gear stick to the right and to the rear.
When reverse gear is engaged with ignition on, the reversing lights
come on.N No
ot
te
e
When driving you should not rest your hand on the gear lever. The pressure
of your hand is transmitted to the selector forks in the gearbox and can
cause premature wear on the forks.
K
A Au
ut
to
om
ma
at
ti
ic
c gge
ea
ar
rb
bo
ox
x*
*
Driving programmes
The gearbox management is fitted with several driving
programmes. According to the driving style or to the momentary
Fig. 139
Fig. 140

1
R
35
246
AL0-015
PRN
D3
2
1
AL0-120