technical data Seat Alhambra 2005 Owner's Guide

Instrument panel47
Safety FirstControls and equipment Tips and Maintenance Technical Data
When the vehicle is stationary or travelling at very low speeds, the
temperature displayed may be slightly higher than the actual
outside temperature as a result of radiant heat from the engine.
K
Multi-function indicator*
Apart from the time, the multi-function indicator offers a varietyof
additional information.
• Outside temperature*
• Current fuel consumption
• Average fuel consumption
• Distance that can be travelled with the amount of fuel left in the
tank.
• Km driven
• Average speed
• Driving time
On the upper part of the display appears the symbol of the
function, except if the time is indicated
⇒fig. 47with average
consumption.
If you press button
Bon the windscreen wiper lever while ignition
is on additional information will appear:
Fig. 47
Fig. 48
0 2
15
6
4
7
8
1/ m i n
x1000
3
10.0
Ø l/100 km
1
EPC
AL0-071
ABAL0-153


Instrument panel49
Safety FirstControls and equipment Tips and Maintenance Technical Data
N No
o ssy
ym
mb
bo
ol
l -- TTi
im
me
e
The time appears even if the ignition is switched off.
The clock is set by turning the button next to the rev counter in the
instrument panel
⇒page 46 "Digital clock".
° °C
C -- OOu
ut
ts
si
id
de
e tte
em
mp
pe
er
ra
at
tu
ur
re
e
The temperature range goes from –40°C to +58°C. If the car is
stationary or if driving at slow speed the indicated temperature
may be slightly higher than the real temperature due to engine
heat.
If the outside temperature is between +4°C and –7°C the ice
symbol will appear on the display (warning for icy road).
This symbol will flash at first for about 5 seconds and then remain
lit while the outside temperature is not above +4°C or below –7°C.
W Wh
he
en
n tth
he
e ssy
ym
mb
bo
ol
l ffo
or
r iic
cy
y rro
oa
ad
ds
s aap
pp
pe
ea
ar
rs
s tth
he
e mmu
ul
lt
ti
i-
-f
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r
a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y iin
nd
di
ic
ca
at
te
es
s tth
he
e oou
ut
ts
si
id
de
e tte
em
mp
pe
er
ra
at
tu
ur
re
e ((w
wa
ar
rn
ni
in
ng
g ffo
or
r iic
cy
y
r ro
oa
ad
ds
s)
),
, rre
eg
ga
ar
rd
dl
le
es
ss
s oof
f tth
he
e sse
el
le
ec
ct
te
ed
d ffu
un
nc
ct
ti
io
on
n.
.If you wish to see the previously selected function press the
⇒fig.
48Bbutton on the windscreen wiper lever.
l l/
/1
10
00
0 kkm
m -- IIn
ns
st
ta
an
nt
ta
an
ne
eo
ou
us
s ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
Instantaneous consumption is shown in l/100 km. The computer
calculates the consumption every 30 meters. When the vehicle is
stationary the computer will display the last value in the memory.
On some models, the display will show fuel consumption in
ltr/hour when the vehicle is in a stationary position with the engine
running.
If the instantaneous consumption display is selected when the
engine is started, the computer will indicate the average
consumption for the first 30 to 40 meters.
You can use this display to adjust your driving style to the desired
fuel consumption.
Ø Ø ll/
/1
10
00
0 kkm
m -- AAv
ve
er
ra
ag
ge
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
This mode shows the average fuel consumption only and not the
consumption at the time of reading.
Once the memory is deleted the display will show the average
consumption after approximately 30 meters. Until then, the display
will show dashes instead of the value. The value is updated
throughout the trip every 5 seconds.
If you select the individual memory( (M
Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11)
)
the
average consumption of a particular trip is displayed.

I In
n cca
as
se
e tth
hi
is
s ssy
ym
mb
bo
ol
l iis
s uus
se
ed
d aas
s aan
n iin
nd
di
ic
ca
at
ti
io
on
n ffo
or
r iic
cy
y rro
oa
ad
ds
s,
, kke
ee
ep
p iin
n mmi
in
nd
d tth
ha
at
t
t th
he
e rro
oa
ad
d mma
ay
y cco
on
nt
ti
in
nu
ue
e tto
o bbe
e iic
cy
y eev
ve
en
n iif
f tth
he
e tte
em
mp
pe
er
ra
at
tu
ur
re
e iis
s aar
ro
ou
un
nd
d ++4
4°
°C
C.
.
W
WA
AR
RN
NI
IN
NG
G

Instrument panel51
Safety FirstControls and equipment Tips and Maintenance Technical Data
T Th
hi
is
s iis
s nno
ot
t sse
er
ri
io
ou
us
s aas
s llo
on
ng
g aas
s tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p Cd
do
oe
es
s nno
ot
t ffl
la
as
sh
h.
.
CW
Wa
ar
rn
ni
in
ng
g lla
am
mp
p
If the lamp flashes and a tone is heard at the same time when
driving, first check the coolant temperature being displayed.
If the needle is in the normal zone, top the coolant up at the next
opportunity.
If the reading is in the right hand area, the temperature of the
coolant level is too high. S St
to
op
p,
, ssw
wi
it
tc
ch
h een
ng
gi
in
ne
e oof
ff
f
and try to find
cause of trouble
⇒"Coolant system" chapter.
N No
ot
te
e
Bear in mind the warnings in the "Coolant system" chapter.
A
Ad
dd
di
it
ti
io
on
na
al
l lli
ig
gh
ht
ts
s iin
n ffr
ro
on
nt
t oof
f tth
he
e cco
oo
ol
li
in
ng
g aai
ir
r iin
nt
ta
ak
ke
e iin
nt
te
er
rf
fe
er
re
e wwi
it
th
h tth
he
e
f fl
lo
ow
w oof
f cco
oo
ol
li
in
ng
g aai
ir
r.
. AAt
t hhi
ig
gh
h aam
mb
bi
ie
en
nt
t tte
em
mp
pe
er
ra
at
tu
ur
re
es
s aan
nd
d ffu
ul
ll
l tth
hr
ro
ot
tt
tl
le
e
t th
he
er
re
e iis
s aa dda
an
ng
ge
er
r tth
ha
at
t tth
he
e een
ng
gi
in
ne
e wwi
il
ll
l tth
he
en
n oov
ve
er
rh
he
ea
at
t.
.
K
Warning lamps display/Selector lever positions*
(automatic gear)
This screen displays several warning lamps and depending on the
model version also written messages
⇒chapter "Onboard
computer/navigation".
Information on selector lever positions appear in the chapter
"Automaticgear".
K
Fuel gauge
This gauge works when ignition is switched on.
The tank holds about 70 litres.
When the needle reaches the red reserve zone (arrow) and the
warning lamp
Dlights up, there is about 8 litres (2 gallons) of fuel
left in the tank.
K
Fig. 50
1/ 2
0
1/190
12 0
406080
507090
D!AL0-073

Instrument panel53
Safety FirstControls and equipment Tips and Maintenance Technical Data
Speedometer
The speedometer is fitted with a digital mileage clock and a trip
mileage clock as well as a service interval indicator* and outside
temperature*.
During the running-in period the instructions in the chapter "The
first 1,500 kilometres and afterwards" should be noted.
K
Voltmeter
The voltmeter shows the voltage of the vehicle’s electrical
installation. T Th
he
e nno
or
rm
ma
al
l rre
ea
ad
di
in
ng
g lli
ie
es
s bbe
et
tw
we
ee
en
n 112
2 aan
nd
d 115
5 VV.
. IIf
f tth
he
e
v vo
ol
lt
ta
ag
ge
e ffa
al
ll
ls
s bbe
el
lo
ow
w 112
2 VV wwi
it
th
h tth
he
e een
ng
gi
in
ne
e rru
un
nn
ni
in
ng
g,
, hha
av
ve
e tth
he
e ppo
ow
we
er
r
s su
up
pp
pl
ly
y ((b
ba
at
tt
te
er
ry
y aan
nd
d gge
en
ne
er
ra
at
to
or
r)
) cch
he
ec
ck
ke
ed
d aat
t aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e
C Ce
en
nt
tr
re
e
⇒"
"W
Wa
ar
rn
ni
in
ng
g lla
am
mp
ps
s"
" cch
ha
ap
pt
te
er
r.
.
During engine starting the voltage can fall below 8 V.
K
220
260
240
88
AL0-074Fig. 51

Instrument panel55
Safety FirstControls and equipment Tips and Maintenance Technical Data
Audio set*
R Ro
oc
ck
ke
er
r bbu
ut
tt
to
on
n 3
Press the upper area V VO
OL
L ++
: Increase volume
Press lower area V VO
OL
L ––
: Reduce volumeR Ro
oc
ck
ke
er
r bbu
ut
tt
to
on
n
4
Press upper area
• Forward station search (radio)
• Forward TIM messages (Navigation system*/Radio SCALA)
• Fast forward (cassette mode*)
• Forward title search (CD mode*)
Press lower area:
• Backward station search (radio)
• Backward TIM messages (Navigation system*/Radio SCALA)
• Fast backward (cassette mode*)
• Backward title search (CD mode*)
K
3
4
B45-380KFig. 53

Instrument panel57
Safety FirstControls and equipment Tips and Maintenance Technical Data
I It
te
em
mS
Sy
ym
mb
bo
ol
lM
Me
ea
an
ni
in
ng
g oof
f wwa
ar
rn
ni
in
ng
g aan
nd
d cco
on
nt
tr
ro
ol
l lla
am
mp
ps
sF
Fu
ur
rt
th
he
er
ri
in
nf
fo
or
rm
ma
at
ti
io
on
n
1Air Bag⇒page 58
2Trailer turn signals*⇒page 58
3Cruise control*⇒page 58
4Selector lever lock⇒page 58
5Rear fog light⇒page 58
6Diesel pre-heating system⇒page 58
7Turn signals⇒page 58
8Engine failure*⇒page 59
9Main beam⇒page 59
10Diagnosis/excess pollution*⇒page 59
11Wheel spin regulator (TCS)⇒page 59
11Electronic stability program* (ESP)⇒page 59
12Anti-locking brake system ABS*⇒page 59
I It
te
em
mS
Sy
ym
mb
bo
ol
lM
Me
ea
an
ni
in
ng
g oof
f wwa
ar
rn
ni
in
ng
g aan
nd
d cco
on
nt
tr
ro
ol
l lla
am
mp
ps
sF
Fu
ur
rt
th
he
er
ri
in
nf
fo
or
rm
ma
at
ti
io
on
n
13Electronic immobilizer*⇒page 60
14Brakes/Hand brake⇒page 60
15Alternator⇒page 61
16Seat belt warning lamp*⇒page 61
17Fuel reserve*⇒page 61
18Headlight failure*⇒page 61
19Open bonnet/tailgate warning lamp*⇒page 61
20Windscreen washer fluid level*⇒page 62
21Open doors warning lamp*⇒page 62
22Brake pad wear monitor*⇒page 62
23Engine oil pressure/level*⇒page 62
24Coolant temperature/level⇒page 63K

Instrument panel59
Safety FirstControls and equipment Tips and Maintenance Technical Data
Engine failure*
P Pe
et
tr
ro
ol
l een
ng
gi
in
ne
e
D Di
ie
es
se
el
l een
ng
gi
in
ne
e
If there was an engine failure while driving, the corresponding
warning lamp would light (petrol engine) or would start to flash
(diesel engine). The engine must be checked as soon as possible
by a Technical Service Centre.
K
Main beam
The warning lamp comes on when the beam is on or when the
headlight flasher is used.
K
Diagnosis*
The warning lamp will flash in the event of a breakdown in the
petrol engine’s electrical system while driving. The engine must be
checked as soon as possible by a Technical Service Centre.
K
Wheel spin regulator of the driving wheels (TCS)
The warning lamp comes on when the ignition is switched on, and
should go out after about 2 seconds.
If the TCS works while the vehicle is in motion, the warning lamp
flashes.
If the system is disconnected or has a fault, the warning lamp will
stay on.As the TCS works in combination with the ABS, if the ABS breaks
down the TCS warning lamp also comes on.
For more information see page 164.
K
Electronic stability program (ESP)*
The warning lamp comes on when the ignition is switched on, and
should go out after about 2 seconds.
If the ESP works while the vehicle is in motion, the warning lamp
flashes.
If the system is disconnected or has a fault, the warning lamp will
stay on.
As the ESP works in combination with the ABS, if the ABS breaks
down the ESP warning lamp also comes on.
For more information see page 165.
K
Anti-locking brake system (ABS)*
This warning lamp monitors the ABS and EDS* systems.
A An
nt
ti
i-
-l
lo
oc
ck
k bbr
ra
ak
ke
e ssy
ys
st
te
em
m ((A
AB
BS
S)
)*
*
The warning lamp comes on for a few seconds when the ignition is
switched on or the engine started. The lamp goes out after an
automatictest sequence has been completed.
If the ABS warning lamp does not come on when the ignition is
switched on, does not go out or comes on when driving, the
system is faulty.


Instrument panel61
Safety FirstControls and equipment Tips and Maintenance Technical Data
Alternator
The warning lamp will come on when the ignition is switched on. It
must go out after the engine has been started.
The alternator is driven by a long-life ribbed belt.
If the warning lamp comes on while driving, s st
to
op
p,
, ttu
ur
rn
n oof
ff
f een
ng
gi
in
ne
e
and check ribbed belt.
If the belt is loose or broken, d do
o nno
ot
t ddr
ri
iv
ve
e
since the coolant pump
is no longer being driven. The belt must be checked or replaced.
If the warning lamp comes on even though the ribbed belt is not
broken or loose, one can proceed normally to the nearest Technical
Service Centre.
Since the battery will continue to discharge it is advisable to switch
off all unessential electrical consumers.
K
Seat belt warning lamp*
This warning lamp (only in some countries) lights for about 6
seconds when the ignition is switched on as a reminder to fasten
your seat belts.
If the seat belt is not fastened an acoustic signal will sound after
switching on the ignition which will stop after about 6 seconds or
when the seat belt is fastened.
Check the "Seat belts" chapter.
K
Fuel reserve*
The warning lamp will light up once there are about 7/81)liters left
in the tank. An acoustic signal will sound at the same time.
K
Headlight failure*
This warning lamp lights if there is a defect in the main beam.K
Open tailgate warning lamp*
This warning lamp comes on when the tailgate is open.
This warning lamp goes out only if the bonnet/tailgate is
completely closed.
K
I If
f bbo
ot
th
h tth
he
e bbr
ra
ak
ke
e aan
nd
d AAB
BS
S wwa
ar
rn
ni
in
ng
g lla
am
mp
ps
s cco
om
me
e oon
n,
, tth
hi
is
s mma
ay
y bbe
e rre
el
la
at
te
ed
d tto
o aa
d de
ef
fe
ec
ct
t iin
n tth
he
e AAB
BS
S rre
eg
gu
ul
la
at
ti
io
on
n wwh
hi
ic
ch
h cco
ou
ul
ld
d,
, uun
nd
de
er
r cce
er
rt
ta
ai
in
n cci
ir
rc
cu
um
ms
st
ta
an
nc
ce
es
s,
,
c ca
au
us
se
e tth
he
e rre
ea
ar
r oof
f tth
he
e vve
eh
hi
ic
cl
le
e tto
o ssp
pi
in
n oou
ut
t.
.
P Pr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e wwh
hi
il
le
e eex
xe
er
rc
ci
is
si
in
ng
g eex
xt
tr
re
em
me
e
c ca
au
ut
ti
io
on
n tto
o hha
av
ve
e tth
he
e ffa
au
ul
lt
t rre
ep
pa
ai
ir
re
ed
d.
.
K
W WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)
1)Four-wheel drive.

Instrument panel63
Safety FirstControls and equipment Tips and Maintenance Technical Data
Coolant temperature/level
The warning lamp lights up for a few seconds as a functional check
when ignition is switched on.
If the warning lamp does not go out, or lights up or flashes while
driving the coolant temperature is too high or the coolant level too
low. An acoustic signal will sound three times as an additional
warning:
Stop immediately, stop engine and check level. If necessary add
coolant. The coolant type is detailed in the "Coolant system"
chapter.
If the coolant level is in order the trouble may be due to failure of
the radiator fan. In this case, check radiator fan fuse and replace if
necessary.
If the warning lamp does not go out even though coolant level and
fan fuse are in order,d do
o nno
ot
t ddr
ri
iv
ve
e oon
n
. Call in expert assistance.
If the trouble is located only in the radiator fan and the coolant
level is in order and temperature warning lamp is off – you may
drive on to the nearest Technical Service Centre. To make use of the
air stream for cooling do not let engine idle nor drive very slowly.
K
• • NNe
ev
ve
er
r oop
pe
en
n tth
he
e bbo
on
nn
ne
et
t iif
f yyo
ou
u sse
ee
e sst
te
ea
am
m oor
r cco
oo
ol
la
an
nt
t cco
om
mi
in
ng
g ffr
ro
om
m tth
he
e
e en
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t!
! RRi
is
sk
k oof
f ssc
ca
al
ld
di
in
ng
g.
. WWa
ai
it
t uun
nt
ti
il
l nno
o mmo
or
re
e sst
te
ea
am
m oor
r cco
oo
ol
la
an
nt
t
c ca
an
n bbe
e sse
ee
en
n.
.
• • DDo
o nno
ot
t tto
ou
uc
ch
h ffa
an
n.
. FFa
an
n cco
ou
ul
ld
d ssw
wi
it
tc
ch
h oon
n ssu
ud
dd
de
en
nl
ly
y eev
ve
en
n iif
f een
ng
gi
in
ne
e iis
s
s sw
wi
it
tc
ch
he
ed
d oof
ff
f.
.
W
WA
AR
RN
NI
IN
NG
G
• • PPl
le
ea
as
se
e nno
ot
te
e tth
he
e ffo
ol
ll
lo
ow
wi
in
ng
g ppo
oi
in
nt
ts
s tto
o aav
vo
oi
id
d ssc
ca
al
ld
di
in
ng
g wwi
it
th
h hho
ot
t cco
oo
ol
la
an
nt
t:
:
– – EEx
xe
er
rc
ci
is
se
e cca
au
ut
ti
io
on
n wwh
he
en
n oop
pe
en
ni
in
ng
g tth
he
e cco
oo
ol
la
an
nt
t eex
xp
pa
an
ns
si
io
on
n tta
an
nk
k!
! WWh
he
en
n tth
he
e
e en
ng
gi
in
ne
e iis
s hho
ot
t tth
he
e cco
oo
ol
la
an
nt
t ssy
ys
st
te
em
m iis
s uun
nd
de
er
r ppr
re
es
ss
su
ur
re
e.
. LLe
et
t een
ng
gi
in
ne
e cco
oo
ol
l ddo
ow
wn
n
b be
ef
fo
or
re
e uun
ns
sc
cr
re
ew
wi
in
ng
g tth
he
e cca
ap
p.
.
– – TTo
o ppr
ro
ot
te
ec
ct
t yyo
ou
ur
r ffa
ac
ce
e,
, hha
an
nd
ds
s aan
nd
d aar
rm
ms
s ffr
ro
om
m sst
te
ea
am
m oor
r hho
ot
t ffl
lu
ui
id
d cco
ov
ve
er
r tth
he
e
c ca
ap
p wwi
it
th
h aa lla
ar
rg
ge
e ccl
lo
ot
th
h.
.
• • EEn
ns
su
ur
re
e tth
ha
at
t cco
oo
ol
la
an
nt
t ffl
lu
ui
id
d ddo
oe
es
s nno
ot
t ddr
ro
op
p oon
n tth
he
e hho
ot
t eex
xh
ha
au
us
st
t oor
r aan
ny
y oot
th
he
er
r
h ho
ot
t een
ng
gi
in
ne
e cco
om
mp
po
on
ne
en
nt
t.
. TTh
he
e aan
nt
ti
if
fr
re
ee
ez
ze
e iin
n tth
he
e cco
oo
ol
la
an
nt
t cco
ou
ul
ld
d iig
gn
ni
it
te
e.
.
W
WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)

Instrument panel65
Safety FirstControls and equipment Tips and Maintenance Technical Data
Function check
V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h mma
an
nu
ua
al
l gge
ea
ar
r
Malfunctioning will be displayed once the ignition is switched on.
At the same time the corresponding acoustic signal will sound.
V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h aau
ut
to
om
ma
at
ti
ic
c gge
ea
ar
r
Once the ignition is switched on and the lever is in the positions
"P P
" or "N N
" the warning will appear on the driver’s display:
"STOP CAR, PRESS BRAKES TO SET SPEED".
After choosing the speed ("R R
", "D D
" etc.) this warning will disappear.
In case of one or more malfunctions the warning will disappear
after 15 seconds from switching on the ignition and the symbols of
the corresponding malfunction with the respective informative text
will be displayed.
F Fo
or
r aal
ll
l vve
eh
hi
ic
cl
le
es
s:
:
In case of malfunction an acoustic signal will sound with the
following display:
– – PPr
ri
io
or
ri
it
ty
y 11 –– tth
hr
re
ee
e aac
co
ou
us
st
ti
ic
c ssi
ig
gn
na
al
ls
s
– – PPr
ri
io
or
ri
it
ty
y 22 –– oon
ne
e aac
co
ou
us
st
ti
ic
c ssi
ig
gn
na
al
lWith malfunctions of priority 1 and 2 simultaneously three acoustic
signals will sound.
In case of malfunction the symbol with the corresponding
informative text will be displayed.
N No
ot
te
e
The priority 2 malfunctions will appear once the priority 1 malfunctions are
repaired or eliminated.K
Priority 1 (red symbols)
T Th
he
e ppr
ri
io
or
ri
it
ty
y 11 ssy
ym
mb
bo
ol
ls
s ssi
ig
gn
na
al
l dda
an
ng
ge
er
r.
. FFo
or
r tth
hi
is
s rre
ea
as
so
on
n,
, sst
to
op
p tth
he
e
v ve
eh
hi
ic
cl
le
e aan
nd
d ttu
ur
rn
n oof
ff
f een
ng
gi
in
ne
e.
.
Eliminate defect. The help of a mechanic may be necessary.
If there are several priority 1 malfunctions the symbols will appear
consecutively for about 2 seconds. The symbols will flash until the
defect has been corrected.
The following priority 1 malfunction or warning may appear:
E En
ng
gi
in
ne
e ooi
il
l ppr
re
es
ss
su
ur
re
e
The corresponding warning is:
"STOP PRESS OIL"
STOP ENGINE!
If this symbol begins to flash while driving y yo
ou
u mmu
us
st
t sst
to
op
p tth
he
e
v ve
eh
hi
ic
cl
le
e aan
nd
d ssw
wi
it
tc
ch
h oof
ff
f een
ng
gi
in
ne
e
. Check oil level and, if necessary, add
oil
⇒"Engine oil" chapter.