If and when 366
To replace the tailgate light bulbs
Complete operations only in the sequence given:
Fig. 219 On the boot lid:
Remove the cover.
Fig. 220 On the boot lid:
Remove the lamp holder.
1.Always take the checklist into account and take the necessary
actions Ÿpage 361.
2.Open the tailgate Ÿpage 97.
3.Extract the cover carefully using the flat part of the screwdriver as a
lever ( Ÿpage 354, fig. 207) on the indent Ÿfig. 219 .
4.Release the lamp holder connector by pulling on the red connector
block.
5.Press on the attachment tabs in the direction of the arrow
Ÿfig. 220 and pull out the lamp holder.
6.Replace the faulty bulb by a new identical bulb.
7.Install the lamp holder. The attachment tabs should audibly click
into place.
8.Insert the cover. The cover should lock into place.
A1