wheel Seat Arona 2020 User Guide

Operation
More the lever to the required position:
4 v
Short wipe. Brief press, short clean.
Hold the lev
er do
wn for more time to in-
crease the wipe frequency.
5 W
Windscreen washer. The windscreen
washer function is activated by push-
ing the le

ver towards the steering
wheel, and the wipers operate simulta-
neously.
6 
Interval wipe for rear window. The wip-
er will wipe the window approximat
ely
e

very six seconds.
7 \
The rear window wash function is acti-
vated by pressing the l
e

ver, and the
rear wiper starts simultaneously. WARNING
In cold conditions you should not use the
wash/wipe system unless you hav e
w

armed the windscreen with the heating
and ventilation system. The windscreen
washer fluid could otherwise freeze on the
windscreen and obscure your view of the
road. CAUTION
If the ignition is switched off with the wind-
screen wipers active, they compl et

e their
wipe before returning to the rest position.
When switching the ignition back on, the
windscreen wiper will continue to operate
at the same wiping level. Ice, snow and oth- er obstacles on the windscreen may dam-
age the wiper and the windscreen wiper
motor.

Operation
Variable floor in the tilted position
When the v ariabl
e floor is tilt
ed you can ac-
cess the spar
e wheel or anti-puncture kit
area.

Infotainment System
Manually tuning a station frequency
Quickly track
the fr equency
band Pr
ess and hol
d one of the arr o w
buttons on the left of the multifunc-
tion steering wheel . R

eleasing the
button switches to the next radio
station that can be tuned.
OR: Keep your finger on the scroll
button in the frequency band and
mo v

e your finger to move the but-
ton.
Hide the fre-
quency band Briefly press the settings button.
Selecting a station using the mem-
ory button also ends the manual
selection of fr
equencies. If no oper

-
ations are performed, the frequen-
cy band is hidden after a while. Presetting stations
Saving the sta-
tion that is be-
ing list ened to
. Pr
ess and hol
d the desired preset
button

Driving
Using the blind spot detector (BSD)
with parking assist ant (RC
TA) Activating and deactivating the blind spot
detector (BSD) with parking assistant
(RC T
A)
The blind spot detector with parking assistant
can be switched on and off by accessing the
Assistance systems menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the Assistants menu.

Driving
The control lamps light up together when the
ignition is s wit
ched on and shoul d t
urn off af
-
ter approximately 2 seconds. This is the time
taken for the function check.
Brake assist systems Electronic Stability Control (ESC)*
The ESC helps to improv
e saf

ety. It reduces
the tendency to skid and improves the stabili-
ty and roadholding of the vehicle. The ESC
detects critical handling situations, such as
vehicle understeer or oversteer, or wheelspin
on the driving wheels. It stabilises the vehicle
by braking individual wheels or by reducing
the engine torque. The warning lamp will
flash on the instrument panel when the ESC is
intervening !.
The ESC includes the anti-lock brake system
(ABS), the hydraulic brake assist (HBA), the
traction control system (ASR), electronic dif-
ferential lock (EDS), electronic torque control
(XDS).
ESC also helps stabilise the vehicle by
changing the torque.
The ASR can be deactivated when wheel spin
is desirable

Braking and parking
Via the ESC, the XDS will brake the inside
wheel and count er the e
xcess driving t
or
que
of that wheel. This means that the requested
trajectory is much more precise.
XDS works in combination with the ESC and is
always active, even when ASR is disconnec-
ted, or when the ESC is in Sport mode or dis-
connected.
Multi-collision brake*
In an accident, the multi-collision brake can
help the driver by braking to avoid the risk of
skidding during the accident and causing
other collisions.
The multi-collision brake works for front, side
or rear accidents, when the airbag control
unit records its activation level and the acci-
dent takes place at a speed of over 10 km/h
(6 mph). The ESC automatically brakes the
vehicle, as long as the accident has not dam-
aged the ESC, the brake hydraulics or the on-
board network
The following actions control automatic brak-
ing during the accident:

Wheels
Foreign objects inserted in the tyre

Practical tips
event of a puncture, and the vehicle should
be driv en with car
e. R
efit the normal r
oad
wheel as soon as possible.
Manufacturing date
The manufacturing date is also indicated on
the tyre sidewall (or on the inside face of the
wheel):
DOT ... 221 ...
it means, for example, that the tyre was man-
ufactured in the 22nd week of 2018. WARNING

Wheels

Wheels
vehicle is in motion. Risk of accident! If the
tightening torque is t
oo high, the wheel nuts
and thr
eads can be damaged. CAUTION
See