display Seat Ateca 2020 Owner's Guide

Infotainment System
Phonebook Menu (contacts) Fig. 229
Contacts Menu. Fig. 230
Search window. Once the first pairing is made, it may take
some time until the phonebook dat
a1)
of the
pair ed mobil
e are av
ailable in the infotain-
ment system. Depending on the volume of data that has to be transferred, the process
may take sever

al minutes. It may be necessa-
ry to confirm the data transmission on the
mobile phone.
The phonebook can also be viewed during a
telephone conversation.
If the name saved in the phonebook has an
assigned photo, it can be displayed on the list
next to the name. To do this, the option Show pictures for contacts in the Phone set
-
tings conte
xt must be enabl

ed and your mo-
bile phone must support this functionality
(check the compatibility list)

Start and driving
Note
After the engine is switched off the radiator
fan may run on for up to 10 minut es, e
ven if
the ignition is switched off. It is also possi-
ble that the fan turns itself on once more if
the coolant temperature increases due to
the heat accumulated in the engine com-
partment or due to its prolonged exposure
to solar radiation. Electronic immobilizer
The electronic immobiliser prevents unau-
thorised persons fr
om driving the v
ehicle
.
Inside the k

ey there is a chip that deactivates
the electronic immobiliser automatically
when the key is inserted into the ignition.
The electronic immobiliser will be activated
again automatically as soon as you pull the
key out of the ignition lock. For vehicles with
the “Keyless Access” system, the key has to
be outside the vehicle.
If the following message is shown on the in-
strument panel display: SAFE , the vehicle
cannot be started.
The engine can only be started using a genu-
ine SEAT key with its correct code. Note
A perfect operation of the vehicle is ensur-
ed if genuine SEAT keys are used. Emergency starting function
Fig. 240
On the right of the steering column:
emer gency st art. If no valid key is detected inside the vehicle,
an emer
gency st
art-up will be r
equir

ed. The
relevant message will appear in the dash
panel display. This may happen when, for ex-
ample, the vehicle key battery is very low:

Driving
Gear change: selector lever in the
drive position!
This driv er message is displ
ayed when the
sel ect
or l
ever is not in the position P when the
driver door is opened. Additionally, a buzzing
sound is emitted. Put the selector lever in po-
sition P, otherwise the vehicle could roll away.
Ignition is switched on
This driver message is displayed and a buz-
zer is sounded when the driver door is
opened with the ignition switched on.
“My Beat” function For vehicles with a convenience key there is
the “My Beat” function. This f
eat
ure pr
o

vides
an additional indication of the vehicle ignition
system.
When entering the vehicle, the start button

Start and driving
Stop/Park
On l e
vel gr
ound, just use the l
ever to engage
position P. On slopes you should first apply
the parking brake and then set the lever to P.
This makes it easier to remove the lever from
position P when starting.
If the driver door is opened and the lever is
not in position P, the vehicle could move. The
following warning is displayed on the instru-
ment panel:

Driving
CCS temporarily switched off. The set
speed is displ ayed in small or dark
ened
figur es.
Syst em err
or. Contact a specialised
workshop.
CCS switched on. The speed memory is
empty.
The CCS is switched on. The set speed is
displayed in large figures.
Changing gear in CCS mode
The CCS decelerates as soon as the clutch
pedal is pressed, intervening again automati-
cally after a gear is engaged.
Travelling down hills with the CCS
If the CCS cannot maintain a constant vehi-
cle speed downhill, brake and change down
a gear if necessary. The GRA is temporarily
disabled by pressing the brake.
Automatic off
The GRA disconnects automatically or is
temporarily interrupted:

Driving
Function to prevent overtaking on
the right Fig. 266
On the instrument panel display:
ACC activ e, v
ehicl e det
ected in an outer lane.The ACC has a function to prevent overtaking
on the right.
If another v
ehicl
e is driving mor e sl
o

wly to the
left of the vehicle, it is shown on the display

Driving
Vehicles driving in the opposite direction
and v ehicl
es crossing your path
The ACC does not r eact t
o vehicles ap-
proaching from the opposite direction or ve-
hicles crossing your path.
Metal objects
Metal objects, e.g. guard rails or sheets used
in road works, can confuse the radar sensor
and cause the ACC to react wrongly.
Factors that may affect how the radar
sensor operates
If laser sensor operation is impaired, due to
heavy rain snow or mud, the ACC is deactiva-
ted temporarily. A message will be displayed
stating this. If necessary clean the SEAT
badge

Braking and parking
Using the blind spot detector (BSD)
with parking assist ant (RC
TA) Activating and deactivating the blind spot
detector (BSD) with parking assistant
(RC T
A)
The blind spot detector with parking assistant
can be switched on and off by accessing the
Assistance systems menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the Assistants menu.

Help with parking and manoeuvring
Selecting a parking mode Fig. 283
On the instrument panel display: view
of the parking assist syst em with reduced vie
w. Fig. 284
On the instrument panel display: in-
dication of parking modes. Parking assist has the following 3 parking
modes: Reverse parallel parking.
R
e
verse angl
e parking.
F
orward angle parking.
Selecting a parking mode after passing in
front of the space
After activating the Park Assist system and af-
ter detecting a parking space, the display on
the instrument panel proposes a parking
mode. The Park Assist system selects the
parking mode automatically. The selected
mode is shown on the instrument panel dis-
play

Driving
Parking with the parking assist system Fig. 285
On the instrument panel display: paral-
lel parking.  Finding a parking space .
 Park-
ing position.  Manoeuvring. Fig. 286
On the instrument panel display: angle
parking.  Finding a parking space.  Parking
position.  Manoeuvring. Message to move forwards
Y
our v
ehicle
P ark

ed vehicle
Parking space detected
Message to park
Message to press the brake pedal
Progress bar
1 2
3
4
5
6
7 The necessary conditions have to be met to
park with P
ark Assist