navigation system Seat Leon 5D 2010 MEDIA SYSTEM 2.2

Navigation
60•Select a destination by turning the setting knob ⇒page 8, fig. 1 .•Press the function button.
The destination is opened in the destination window ⇒ page 59, fig. 59.•Pressing the function button starts route guidance to the displayed
destination.•Pressing the function button deletes the destination from the
Destination memory .•Destination items (Street, To w n / P C etc.) can be opened and edited indi-
vidually in the destination window ⇒page 53.•Press the function button to change the displayed entry name
⇒ page 50.
When destination data have been altered, the function button
changes to to allow you to store the changes.
If a flagged destination is displayed in the destination window ⇒ page 61.
Deleting the destination memory and last destinations•Press the unit button from any navigation menu to open the Navi-
gation setup menu .•Press the function button and select the destinations
to be deleted in the next menu.•Press to delete all destinations in the destination
memory
* and Last destinations
•.
•ALTERNATIVELY: press to delete all destinations in the
list of Last destinations
•.
•Alternatively: press the unit button to close the window without
making any changes.
Displaying the information window and storing a flagged destinationOpening the information window for the current vehicle position•From any navigation menu (except the Navigation setup menu ), press the
unit button to open the Details information window ⇒ fig. 60 .
If no route guidance is active, the current vehicle position is displayed in the
information window ⇒ fig. 60 .
During route guidance, the final destination is displayed in the information
window ⇒ page 63.•Turn the setting knob ⇒page 8, fig. 1 in the Details information
window to display all available information on the current vehicle position:
A10
DetailsStartDeleteName
Delete
StoreSETUPDelete destinationAll destinations
Last destinations
E
Fig. 60 Information
w i n d o w w i t h d e t a i l e d v i e w
of the current position.
º
A10
MediaSystem2.1_EN.book Seite 60 Donnerstag, 29. April 2010 4:18 16

Navigation61
Storing a flagged destination•Pressing the function button stores the displayed position as
a Flagged destination in the Destination memory
* ⇒ page 60, fig. 60.
To permanently retain the position stored as a Flagged destination, it must be
renamed in the Destination memory . Otherwise the stored position will be
overwritten the next time a flagged destination is stored.
•Select the flagged destination in the Destination memory ⇒ page 59,
fig. 58 .•Press the function button.
The flagged destination can be renamed.
Storing or editing the home addressOnly one address or position can be stored as the home address at any one
time. The stored home address can be edited or overwritten.
Display
Meaning
Position:
Vehicle position determined by means of GPS
data and navigation data
Latitude:
Latitude
Longitude:
Longitude
Height:
Height above mean sea level.
GPS status:
Display of technical GPS information
Useable satellites:
The number determines the GPS status
Flagged dtn.Details
Fig. 61 Navigation main
menu.Fig. 62 Destination
window with the home
address.
MediaSystem2.1_EN.book Seite 61 Donnerstag, 29. April 2010 4:18 16

Navigation
62To start route guidance to the stored home address, press the
function button in the Navigation main menu ⇒page 61, fig. 61.
If no home address has been stored yet, a home address can be defined after
confirmation of a prompt.
Enter home address•Press the function button to store your current geographical
position (longitude and latitude) as the home address.•ALTERNATIVELY: press to open the destination window Home
address ⇒ page 61, fig. 62 .
The name Home addr. is already entered by default. You can then enter or
change the address ⇒page 53, “Destination window”.
Changing the stored home address•Press the unit button from any navigation menu to open the Navi-
gation setup menu .•Select the function button.•Enter the home address.
Home addr.
Position
Address
SETUPEnter home address
MediaSystem2.1_EN.book Seite 62 Donnerstag, 29. April 2010 4:18 16

Navigation63
Route guidanceIntroductionOnce route guidance has started, the route is calculated according to the data
selected in route options.
The unit switches to the map view. You are guided to your chosen destination
by announcements and visual recommendations.
If dynamic route guidance is activated, TMC traffic reports will be taken into
account in the route calculation ⇒ page 70.
The route options can be changed manually while route guidance is in
progress.
All of the unit's audio sources are available during route guidance.
Additional Information:•Safety notes
’ ⇒ page 6
•Unit overview ⇒ page 8•Introduction to navigation ⇒page 47•Entering a destination ⇒page 52WARNING
The recommendations and traffic signs shown by the navigation system
may differ from the true traffic conditions.•Traffic signs and traffic regulations have priority over the recommenda-
tions and instructions given by the navigation system.•Adapt your speed and driving style to suit visibility, road, traffic and
weather conditions.
Route optionsIt is possible to include TMC traffic reports, exclude certain types of route and
define route criteria for the calculation of the route. The route options can be
Fig. 63 Navigation setup
menu.Fig. 64 Navigation setup
menu: Route options.
MediaSystem2.1_EN.book Seite 63 Donnerstag, 29. April 2010 4:18 16

Navigation
64changed while route guidance is in progress. The route will then be recalcu-
lated.•Press the unit button in one of the navigation menus.•In the Navigation setup menu , press the function button
⇒ page 63, fig. 63.•Select or deselect an option by ticking or clearing the appropriate
checkbox ⇒page 63, fig. 64 .
Defining route criteria •In the Route options setup menu , press the function button.•Press the desired settings to select them in the pop-up window.
Dynamic route
If dynamic route guidance is activated, TMC traffic reports will be taken into
account in the route calculation ⇒page 70.
Excluding types of route in the calculation
The function buttons , etc. define whether or not these
types of road may be included in the route calculation.
Even when excluded, these types of route will still be included in the route
calculation if no practical alternative route exists. For example, if it is impos-
sible to reach an island without using the ferry. For the calculation of very long
routes, it is not possible to avoid motorways.
Navigation announcementsWhen the route has been calculated, the first announcement is given. Up to
three navigation announcements are given before a turn, e.g. within a town
“Prepare to turn left”, “Turn left after 300 metres” and “Now turn left”.•Press the setting knob ⇒page 8, fig. 1 to hear the last navigation
announcement again.
The distances that are announced depend on the type of road and the speed
at which you are driving. On motorways, the first announcement is given
roughly 2,000 m before an exit.
For example, the following announcements may be heard on multi-lane high-
ways or roads that divide, and at roundabouts: “Take the second exit at the
roundabout!”.
When you arrive at your destination, the following announcement is heard:
“You have reached the destination”.
During dynamic route guidance, you receive information about reported
traffic congestion on the route. If the route is recalculated due to traffic
congestion, you will be advised accordingly ⇒page 70.
Announcement settings.
Navigation announcements are played at the preset volume.
The volume of an announcement can be changed with the volume control
D.
All following announcements will then be made at this volume.
The volume of navigation announcements can be preset or switched off in the
Navigation setup menu ⇒ page 73 or in the volume settings ⇒page 88.
Route criteria
MeaningFastest route to the destination, even if it means driv-
ing further.This function aims to find an equilibrium between the
shortest time and the shortest route.Shortest route to the destination, even if it results in a
longer travelling time. The navigation route may
include unusual route sections, e.g. dirt roads.
SETUP
Route optionsRoute criteria
FastEconomicalShort
˜Avoid motorways
A10
MediaSystem2.1_EN.book Seite 64 Donnerstag, 29. April 2010 4:18 16

Navigation65
Visual recommendations on the mapWhen route guidance starts, the system automatically switches to the map
view ⇒fig. 65. The red
9 symbol indicates the vehicle's position and heading
⇒fig. 65 . If
the vehicle position symbol
9 remains in the same position and the map
view freezes, it is currently not possible to determine the vehicle's position,
e.g. in a multi-storey car park.
During route guidance the navigation route is shown as a blue line. Sections
closed to traffic either manually or due to TMC messages advising of traffic
congestion ⇒page 70 are shown in colour on the calculated route.
The next road to take is displayed in the top line of the screen.
After a few seconds, the function buttons disappear from the bottom line of
the screen to display more information on the route ⇒fig. 66.
•Briefly press the bottom-right or bottom-left area of the screen to display
the function buttons again ⇒ fig. 65.•Pressing the unit button switches between the Navigation main
menu and the map view.
When the function buttons are hidden, the current street and information
about the journey length are displayed on the bottom line of the screen
⇒ fig. 66 .: Remaining distance to the destination.: Expected time of arrival or travelling time ⇒page 73.
Shortly before you reach a turning point, a turning arrow appears, indicating
the direction to turn. The distance to the turning point is also displayed below
it.
Changing the map scale (Autozoom)
The “Autozoom” function is enabled for the map view by default. This means
that the map view automatically zooms in and out: Small scale on motorways.
Large scale in urban areas.•Turn the setting knob ⇒page 8, fig. 1 to manually change the scale
of the map for a few seconds. Turn the knob clockwise to zoom in. Turn the
knob anticlockwise to zoom out.
Fig. 65 Map view during
route guidance with the
function buttons
displayed.Fig. 66 Map view during
route guidance.
NAV
A10
MediaSystem2.1_EN.book Seite 65 Donnerstag, 29. April 2010 4:18 16

Navigation
66•To permanently retain the manually selected map scale, “Autozoom”
must be deactivated in the Navigation setup menu ⇒ page 73.
Selecting the map view mode
The map view mode can be changed.•In the map, briefly press the bottom-right or bottom-left area of the screen
to display the function buttons again.•Press the function button ⇒page 65, fig. 65 .•Select one of the playback modes displayed in the pop-up window.
: two dimensions, map oriented to North.
: two dimension, map oriented to vehicle heading.
: three dimensions, birds-eye view of map.
Alternatively, it is possible to switch between the three map views by pressing
on the compass shown on the map.
During route guidance, the calculated route can also be shown on an over-
view map.•Press in the pop-up window to display current position and
destination.
The scale of the overview map cannot be changed.•Press the function button to return to the last shown map view.
Displaying speed limits
If there is a speed limit stored in the navigation data for the road along which
you are travelling, this will be displayed on the map. During route guidance,
the arrow indicating a change of direction takes precedence over the speed
limit display.
Please remember that the navigation data may not be up-to-date and that the
system has limitations ⇒ page 47! The speed limit display is activated in the navigation system settings
⇒
page 73.
Points of interest on map
Depending on the programmed settings, points of interest (petrol stations,
car parks, Authorised Services) will be displayed as symbols on the map
⇒ page 73.
Note
If you miss a turning during route guidance and are currently unable to turn
back, keep on driving until the navigation system offers a new route.
Note
T he q ua lit y o f the i nst ru cti ons g ive n by th e uni t will d e pe nd o n th e navi gat io n
data used.
Note
In addition, the route is optimised with the TMC traffic news received
⇒page 70. The radio stations broadcasting this information are responsible
for the content and the quality of the TMC traffic reports.
Extras
2D North2D Heading3D Heading
Overview map
Back
MediaSystem2.1_EN.book Seite 66 Donnerstag, 29. April 2010 4:18 16

Navigation67
Stopping and resuming route guidanceActive route guidance can be stopped and later resumed from the new vehicle
position at any time. Stopping route guidance
•In the
map view , briefly press the bottom-right or bottom-left area of the
screen to display the function buttons.•Press the function button ⇒fig. 67 .•ALTERNATIVELY: Switch to the main menu Navigation and press the
function button.
Resume route guidance to the last destination•In the map view , pressing the function button always automatically
resumes route guidance to the last destination ⇒fig. 68 .Entering a stopover destinationIt is possible to enter one additional destination as a stopover destination
while route guidance is in progress. You will then always be guided to the
stopover destination first before route guidance continues to the final desti-
nation. The final destination is always the destination to which route guid-
Fig. 67 Stopping route
guidance.Fig. 68 Route guidance
interrupted.
Stop
Stop
Start
Fig. 69 Information
window showing a stop-
over destination during
route guidance.
MediaSystem2.1_EN.book Seite 67 Donnerstag, 29. April 2010 4:18 16

Navigation
68ance is first started. To enter a final destination and stopover destination,
please note the required steps.•To enter a stopover destination, first select a final destination and start
route guidance ⇒page 52.•Press the unit button.•In the Navigation main menu, select an additional destination, following
the same procedure as for selection of a final destination.•When you start route guidance to the additional destination, a pop-up
window opens.•Press the function button to be guided to the newly entered
destination as a stopover destination, before continuing to the final destina-
tion.•Alternatively: press the function button to cancel the
current route guidance and start a new route guidance to the newly entered
destination only.
To view the stopover destination in the information window ⇒page 67,
fig. 69 , press the ⇒page 8, fig. 1 unit button.
An announcement is given when you reach the stopover destination. After a
few seconds, route guidance is resumed to the final destination. You may
then enter another stopover destination.
If the function button is selected during route guidance to a stopover
destination ⇒page 67, you have the option of deleting the stopover
destination.
Display the information window and the list with the routeInformation window during route guidance•Press the unit button from any navigation menu (except SETUP) to open
the information window ⇒ page 58.
During route guidance, the final destination is displayed in the information
window . If a stopover destination has also been entered, this is displayed
above the final destination ⇒page 67, fig. 69.
Inserting the route list
During route guidance, a route list can be inserted via the information
window .•In the information window , press the function button.•Press the function button in the pop-up window.•The route list for the active route guidance will be calculated and
displayed ⇒fig. 70 .
NAVStopover
New destination
º
A7
Stop
Fig. 70 Route list during
route guidance.
º
Route
Route list
MediaSystem2.1_EN.book Seite 68 Donnerstag, 29. April 2010 4:18 16

Navigation69
The route list contains the names or designations of roads to be driven on
before each turning point. These are referred to below as “route sections”. All
route sections to be passed up to the next destination are displayed.
The list also shows the distance to be travelled along each route section and
the expected time required to reach the next turning point.•Turn the setting knob ⇒page 8, fig. 1 to view the route list.•Press the setting knob or Details function button to obtain more informa-
tion about a marked section in an additional information window.•Press the unit button to close the information window.
Display sections of route
The arrow
b behind an entr y in the route list indicates that more sections can
be displayed.
•Select the entry with the arrow
b by turning the setting knob and display
the sections of the route by pressing “Display”. The arrow changes to
a.
•Press the entry with the arrow
a to hide the sections of the route again.
Manually excluding sections in the route listThe sections of the journey which are marked can be excluded individually or
all together from the calculation in the route lists. Only one exclusion may be
entered at a time.•Displaying the route list ⇒ page 68.•Turn the setting knob ⇒page 8, fig. 1 to mark the first route section
of the stretch of route to be excluded.•Press the function button.
The item is marked as excluded and the function button changes to . If, instead of the button , appears in the route list, this
means that the section has already been excluded.
•Select the route section of the stretch of route you wish to exclude and
press the function button.
If the button is not active, the section to be excluded is too long.
(Max) is displayed on the bottom line of the screen after the excluded
distance.•Shorten the section of route to be excluded until the word (Max) disap-
pears and it is possible to select the function button. At the same
time, display partial sections of the route within a section of the route
⇒ page 69.
When an exclusion has been entered, the route list closes.
Route guidance will start again when the navigation system has calculated an
alternative route to the excluded section.
Re-opening a section•Press the unit button in any of the navigation menus (except SETUP).•In the information window , press the function button.•Press the function button in the pop-up window.•Alternatively:open the route list and press the function button.Note
Information on entering an exclusion starting from the current vehicle posi-
tion ⇒page 70.
Note
The excluded route section is displayed on the map ⇒page 65.
A10

A10
Exclude
Exclude to
Exclude to
Re-open
Exclude to
Exclude to
Exclude to
º
Route
Re-open section
Re-open
MediaSystem2.1_EN.book Seite 69 Donnerstag, 29. April 2010 4:18 16