relay Seat Toledo 2006 RADIO-NAVIGATION MFD2

Radio / CD / Sound9
Autostore for all memory levels (Initial Autostore)
– Press for longer than 10 seconds to allocate those stations with the strongest reception in all wavebands to the
upper 6 function keys.
The selected function will be shown on the screen and can be stopped by
pressing again.
A scan in the FM waveband will play through the list of registered stations. A
scan in AM will play all stations with a high quality reception. Each station
scan lasts 8 seconds. Press the menu knob or if you would like to
hear the station currently being played.
Note
Use the function “Initial Autostore” if you are using the unit for the first time
or when selecting new stations in th e waveband. Any station names on the
station buttons will be overwritten. The process of searching for and storing
the station names takes a few seconds.
Setting waveband/Muting– Press in the radio main menu ⇒page 8, fig. 4 to see the
frequencies.
– Press or to receive VHF stations.
– Press or to receive medium wave stations.
– When in FM1 or FM2 mode, press to receive traffic informa- tion reports.
– Press to mute the radio or to switch the mute function off.The last heard station will be played for the waveband selected. Traffic infor-
mation reports will be relayed even wh en the radio has been muted. The TP
function must be active for this purp ose (yellow column next to the field).
When the TP function is active, the lett ers TP are lit up in red. The increased
Scan/_ASScan/_AS
Scan/_AS
Fig. 6 Radio waveband
BandFM1
FM2
AM1
AM2
TP
Radio off
MFD2 ingles Seite 9 Montag, 15. Mai 2006 9:19 09