spark plugs replace SKODA FABIA 2000 1.G / 6Y Workshop Manual

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
Table of ContentsEdition 09.04
S00.5301.14.20I Table of Contents
02 – Inspection and Maintenance
General points..........................................................................................
- Vehicle identification data ............................................................................
- Storage of ŠKODA new vehicles ....................................................................
- Vehicle handover from stock ........................................................................
- Additional customer information regarding inspection and maintenance .....................
Inspection................................................................................................
- Pre-Delivery Inspection -PDI- (Export) .............................................................
- Pre-sales Inspection - (the Czech Republic) ......................................................
- Delivery Inspection (Export) .........................................................................
- Oil Change Service every 15.000 km
1) (QG0) ....................................................
- Annual Inspection (every 12 months) (QG0) ......................................................
- Every 30 000 km (QG0) ..............................................................................
- Every 60 000 km (QG0) ..............................................................................
- Every 90 000 km (QG0) ..............................................................................
- Every 120 000 km (QG0) .............................................................................
- Every 150.000 km (QG0) .............................................................................
- Every 240 000 km (QG0) .............................................................................
- Inspection Service (QG1, QG2) .....................................................................
- Oil change (QG1, QG2)..............................................................................
Engines...................................................................................................
- Engine overview .......................................................................................
- Engine fitted ............................................................................................
- Visual inspection: Engine for leaks and damage .................................................
- Replace engine oil filter ...............................................................................
- Replacing timing belt and tensioning pulley for camshaft drive (1.9 TDI engines) ..........
- Replacing timing belt and tensioning pulley for camshaft drive (1.4 TDI engines) ..........
- Inspecting timing belt for camshaft drive for wear and running (petrol engine) ..............
- Replacing toothed belt and guide pulley for camshaft drive (1.9 SDI engines) ..............
- Inspecting engine oil level ............................................................................
- Change engine oil .....................................................................................
- Inspecting antifreeze protection, replenishing coolant additive if necessary .................
- Inspecting coolant level (volume) ...................................................................
- Ribbed V-belt: Inspect condition....................................................................
- Routing of V-ribbed belt ..............................................................................
- Replace spark plugs ..................................................................................
- Replace air filter element .............................................................................
- Replacing the fuel filter (diesel engine) ............................................................
- Draining the fuel filter (diesel engine) ..............................................................
Gearbox...................................................................................................
- Gearbox/Final drive: Check the oil level and top it if necessary ................................
- Inspecting ATF level, if necessary topping up ....................................................
Chassis...................................................................................................
- Inspecting thickness of front and rear brake pads/linings .......................................
- Inspecting brake system for leaks and damage ..................................................
02-1page 1
02-1page 1
02-1page 3
02-1page 3
02-1page 3
02-2page 1
02-2page 1
02-2page 2
02-2page 3
02-2page 5
02-2page 5
02-2page 6
02-2page 7
02-2page 7
02-2page 7
02-2page 7
02-2page 8
02-2page 8
02-2page 10
02-3page 1
02-3page 1
02-3page 4
02-3page 6
02-3page 7
02-3page 7
02-3page 7
02-3page 7
02-3page 8
02-3page 8
02-3page 8
02-3page 10
02-3page 12
02-3page 14
02-3page 14
02-3page 17
02-3page 18
02-3page 18
02-3page 19
02-4page 1
02-4page 1
02-4page 2
02-5page 1
02-5page 1
02-5page 2

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
InspectionEdition 09.04
S00.5301.14.2002-2 page 7 02
Every 60 000 km (QG0)
Includes: Inspection every 30 000 km and additional operations stated in the table below
Every 90 000 km (QG0)
Includes: Inspection every 30 000 km and additional operations stated in the table below
Every 120 000 km (QG0)
Includes: Inspection every 60 000 km and additional operations stated in the table below
Every 150.000 km (QG0)
Includes: Inspection every 60 000 km and additional operations stated in the table below
Work involvedChapter
–Air filter: Clean housing, replace filter element02-3
–Fuel filter: replace (vehicles with diesel engine)02-3
–Ribbed V-belt: Inspect condition and for vehicles without tensioning pulley also the ten-
sion02-3
–Spark plugs: replace02-3
–Automatic gearbox: Inspect ATF1) level, if necessary top up
1)Automatic transmission fluid for the automatic gearbox
02-4
Work involvedChapter
–Timing belt for camshaft drive: replace (ASY diesel engines up to 04.2001)02-3
–Timing belt and tensioning pulley for camshaft drive: replace (PD diesel engine up to
07.03)02-3
–Timing belt for camshaft drive: inspect (petrol engines) - every 90 000 km, then every 30
000 km02-3
Work involvedChapter
–Timing belt and tensioning pulley (038 109 244 H)1) for camshaft drive: replace (diesel en-
gines other than the PD engine) - vehicles as of 05.2001 to 04.2002
1)When the tensioning pulley Spare Part No. 038 109 244 M is mounted after 120 000 km. on vehicles with a diesel engine during replacement of
the timing belt and the tensioning pulley the change interval of the timing belt should be altered from 120 000 km to 150 000 km. The customer
should be informed about the new service interval when the tensioning pulley is first replaced by a new tensioning pulley Spare Part No. 038
109 244 M by making an entry in the service plan, in the section „Workshop entries“. Only the timing belt will be replaced at each next service
interval at 150 000 km.
02-3
–Timing belt for camshaft drive: replace (PD diesel engine as of 08.03)02-3
Work involvedChapter
–Timing belt: replace (diesel engines other than the PD engine) - vehicles as of 05.200202-3

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
InspectionEdition 09.04
S00.5301.14.2002-2 page 9 02
–Check the tyre inflation pressure (including spare wheel), correct if necessary02-5
–Inspect tyre wear (including spare wheel)02-5
–Inspect tyre tread depth (including spare wheel) and record (FL..., FR..., RR..., RL...,
SP...)02-5
–Inspect exhaust system for leaks, damage and attachment
–Brake fluid volume: Check level, if necessary top up02-5
–Battery: test02-6
–Check the anti-freeze in the cooling system and record ...... °C, check for leaks, top up
coolant if necessary02-3
–Flap lock for the engine bonnet: grease
–Inspect operation of all switches, all electrical components, gauges/indicators and con-
trols for proper operation02-6
–Windscreen wiper and washer system: Inspect condition of wiper blades, wiper operation,
washer system: if necessary top up fluid02-7
–Inspect plenum chamber for dirt, clean if necessary02-7
–Inspect operation of tilting roof and grease the runners02-7
–Headlights: Inspect, if necessary adjust02-6
–Gear oil: Inspect level and top up if necessary (manual gearbox)02-4
–Draining the fuel filter (diesel engine)
–Inspect trailer coupling (with removable arm - manufacturer Profsvar)02-7
–Check underbody protection and body paintwork for damage02-7
–Dust and odour filter element for the passenger compartment: replace02-7
–Air filter: Clean the housing, replace the insert every 4 years or 60.000 km.02-3
–Replace the fuel filter (diesel engine with fuel operation, which does not comply with DIN
EN 590-standard)
–Ribbed V-belt: Inspect condition and for vehicles without tensioning pulley also the ten-
sion - every 60.000 km02-3
–Replace the fuel filter (diesel engine) - every 60.000 km
–Spark plugs: replace - every 60.000 km.02-3
–Automatic gearbox: Check the ATF level, and top up if necessary, every 60.000 km
–Check the timing belt for the camshaft on a 4-cylinder petrol engine at 90.000 km and
then every 30.000 km after that
–Replace the emergency battery for the alarm system - every five years02-6
After each inspection
–Complete the „Next Service“ sticker and affix sticker to the side of the dash panel (on the
driver's side)
–Perform road test including inspection of proper operation of footbrakes and handbrake,
gearshift and steering, final inspection02-9
–„Mirror tag“ - complete and attach to interior mirror
–Hand customer the completed and signed form Work involvedChapter

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 17 02
1.4 litre/55 kW (AMF) with air-conditioning
1 - AC generator
2- AC compressor
3 - Crankshaft
4 - Tensioning pulley
1.9 litre/47 kW (ASY), 1.9 litre/74 kW (ATD), 1.9 litre/96
kW (ASZ), 2.0 litre/85 kW (AZL) without air-condition-
ing
1 - AC generator
2 - Crankshaft
3 - Tensioning pulley
1.9 litre/47 kW (ASY), 1.9 litre/74 kW (ATD), 1.9 litre/96
kW (ASZ), 2.0 litre/85 kW (AZL) with air-conditioning
1- AC compressor
2 - Crankshaft
3 - Tensioning pulley
4 - AC generator
Replace spark plugs
♦To replace the spark plugs use the special spark plug
wrench.
♦Observe all disposal instructions for the spark plugs.
♦Change interval: every 60 000 km.
♦Tightening torque: 30 Nm.
♦Use assembly tool -T10029- for unplugging the spark
plug connector (not applicable to cable with fixture).
2
S02-0314
1
3
4
S02-0315
1 23
Note