start stop button SKODA OCTAVIA 2009 2.G / (1Z) Columbus Navigation System Manual

General information
3
General informationEquipment overview
Switching on/off
: Control button for switching the navigation system
on/off (press) and volume control (turn) Range selector key
for selecting the corresponding menu:
−
- changes over into the radio mode and changes the
frequency range when in the radio mode. −
- changes over to the last played media source or selects a
new media source. −
- activates the phone function* - if required muting of the
current audio source. −
- opens the sound and volume settings menu.
−
- switches over to the map with the display of the current
vehicle position or route during ro
ute guidance. A split-screen with
further information will fade in or fade out. −
- switches over to navigation.
−
(TMC)- switches on the stored traffic reports display (
Traffic-
M essage-
Channels).
−
- enables setting-up the individual fields.
°and°
: The backwards/forwards keys
operate the “active” audio
source. − RADIO-Mode
- for the selection of the stations from the preset list.
− MEDIA-Mode
- for the selection of the previous or following track.
− TV-Mode
- for the selection of the TV stations.
CD/DVD case Touch-screen (Touch-screen):
Fields circled in colour on the touch-
screen are presently “active” and are operated by touching the screen. Eject key
- press briefly to move an inserted CD/DVD into the posi-
tion ready for removal.
- activates the voice control of the unit.
Setting up button
− RADIO mode
- turn for manual station adjustment; press briefly to
start/stop the auto
matic play (Scan).
− MEDIA-Mode
- turn to change track; press briefly to start/stop the
automatic play (Scan) when in audio mode. − Tu r n
map display (MAP)
- in order to change the map scale; press
briefly for repeating a navigation
announcement during active route
guidance. − Navigation
- press briefly to repeat
a navigation announcement
during active route guidance. Memory card case
: Memory cards such as SD (Secure Digital Memory
Cards), MMC (Multimedia Cards) measuring 32 mm x 24 mm x 2.1 mm and with a capacity of up to 4 GB as
well as SDHC (Secure Digital High-
Capacity Memory Cards) wi
th a capacity of up to 32 GB are available. The
case for the memory card is located under the screen.
Explanation of symbols * items of equipment which are marked in such
a way are only installed as standard on
certain models or are supplied as special equipment.ž End of a section.b The section is continued on the next page.Important informationWarrantyThe equipment warranty terms and cond
itions also apply for new vehicles.
Note
Damage within the meaning of the warranty
must not be the result of improper
handling of the system or from unprofessional
repair attempts. It is also essential that
there is no external damage.
A1A2
RADIOMEDIAPHONETO NEMAPNAVTRAFFICSETUP
A3
ƒ
„
A4A5A6
š
A7

A8
A9
s32k.a.book Page 3 Friday, September 18, 2009 1:54 PM

Range selector key NAV (Navigation)
34Range selector key NAV (Navigation)OverviewSafety information regarding the use of the navigation systemThe route is recalculated each time if yo
u ignore driving recommendations or change
the route. This process takes only a few
seconds. Driving recommendations can only
then be re-transmitted. Incomplete navigation data The navigation system cannot receive any data from GPS satellites if you drive for longer periods under thick forest canopy or
when your vehicle is
in a garage, under-
pass or tunnel. In this case, the navigation system orientates itself solely with the help of the vehicle sensors. In regions not at all or only partially digitalised and stored as such on the navigation DVD, the navigation system will try to provide guidance to the destination. Please note that under these circumstances the guidance
to the destination may not be completely
correct if, for example, one-way streets and
road categories (motorway, country road
etc.) are not at all or only partially
included in the navi
gation data used.
WARNING
Always concentrate fully on your driving. Inattention by the driver can lead to accidents and injuries.•
Do not allow yourself to be distracted or loose your concentration, pay
attention to the traffic situation and do not carry out settings or use the radio navigation system.•
Only use the radio navigation system if road, weather and traffic situations
permit this and you are not distracted.•
The various volume settings must be selected in such a way that audible
signals from the outside, such as e.g. a
Martins horn from police cars and fire
brigade, can be heard at all times.
WARNING
Please observe the legal requirements for road traffic when following the driving recommendations provided by your radio navigation system.•
The driving recommendations provided may vary from current situations,
e.g. due to road works or out of date
navigation data. In such a case, always
observe the traffic regulations and
ignore the driving recommendations.
•
Traffic signs and traffice regulations always have priority over the driving
recommendations provided by the navigation system.•
Route guidance is subject to constant
changes, particularly to information
relating to one-way streets, pedestrian
zones etc. stored on the navigation
DVD. Information on traffic lights, stop and right of way signs, parking and stopping restrictions as well as lane constrictions and speed restrictions is not included in the radi
o navigation system.
•
Adjust your speed to suit weather, road and traffic conditions. Do not allow,
for example, the radio navigation system
to make you drive faster in fog - risk
of accident!Navigation data and the navigation DVDStore navigation data in the unit– Push the navigation DVD with
the written side facing up as far as possible into the
CD/DVD case until it is automatically dr
awn in. The unit will compare the data on
the navigation DVD with the data in th
e navigation system memory. No message
will appear if the data in the navigation
system memory of the unit is identical to
the data on the navigation DVD.
– Press the function key , to find ou
t that the storing process has been
completed.
– If the corresponding messag
e appears, press the button or press on the func-
tion key and take out the navigation DVD. Active route guidance is inter- rupted and must be restarted.
Notify
š
Eject
s32k.a.book Page 34 Friday, September 18, 2009 1:54 PM

Range selector key NAV (Navigation)
40
- Move a crosshair to choos
e a point on the map in the
surrounding area where you intend to search for a point of interest. Proceed as described in chapter “Select travel destination from the map”.
- During current route guidance the
search for a point of interest is
limited to the surrounding area of the calculated route. Further options for POI search
- You can search for a particular point of interest by entering a name.
- You can search for a particular point of interest by entering a phone number.
Please enter only the phone number,
without a city or country code.
Select travel destination from the map
– In the menu
New dest.
, press on the function key . The last travel destina-
tion for which route guidance was started will be shown in the map display. If no travel destination was arrived at, the curren
t location will be displayed in an over-
view map.
– Turn button to zoom in and out of the map and/or to change the map scale.
Press the function key or .
– Keep pressing on the map display and do not stop. The crosshair will follow your
movements. If you move the crosshair to
the edge of the screen, the adjoining map
section will appear after a few seconds. The geo-position (position display via coordinates) or the street name for the
current position of the crosshair will be
displayed at the top of the touchscreen.
– If the desired travel destination or destination area is displayed, press the function
key . Route guidance will start automatically.
– Press on the function key , if initially you only wish to store the displayed
destination.
Determining a map destination more accurately You can further restrict a travel destination selected from the map display later on in the menu
Address entry
. For this purpose press the range selector key after the
start of route guidance to change from the map display to the main menu
Navigation
.
Here you can press the function key to
terminate route guidance. If you now
change into the menu
Address entry
, the travel destination selected in the map will be
displayed in the form of an address and can be determined there more precisely. On the other hand
you can use the menu
Address entry
to determine the area to be
displayed in the map display as a destination selection. Further function keys in the map display - briefly switches the map display to the
overview display (large scale). After a few
seconds it will switch
back automatically to the last
selected zoom display (smaller
scale).
- opens a menu for entering a travel destination via its coordinates. - saves the travel destination selected from the map in the destination
memory.
Entering a travel destination via coordinates
– In the menu
New dest.
, press on the function key .
– Press the function key on the map disp
lay. The coordinates of the last travel
destination for which a route guidance was started are displayed. If no travel desti- nation was approached, the coordinates of
the current location will be displayed.
– Press the function key or
to open the corresponding input
mask.
– By pressing on and , you can move the character entry cursor within the input
fields or change to the next input field.
– When in the input mask, press on a character shown in the keypad block to accept
it behind the character input cursor. Ex
isting characters will be overwritten.
– Press on if the desired latitude or longitude is displayed in the entry fields. – Pressing , will erase characters from right
to left as of the position of the char-
acter input cursor. By pressing the input mask will be closed without the entries being accepted.
If the entered coordinates are outside the stored navigation area, a pop-up window will open with the following information: “
These GPS coordinates cannot be
Select point on the mapAlong the routeName withTe l .Map/GPS
Map/GPS
A8
ˆ
}
OK
Save
NAV
Stop
/GPSSaveMap/GPS
Map/GPS
GPSLatitude
Longitude
‚
b
OK
y
s32k.a.book Page 40 Friday, September 18, 2009 1:54 PM

Range selector key NAV (Navigation)
47
- opens a list with the waypoints of the tour currently displayed in
the menu
Waypoint navigation
. The waypoints in the list can be displayed, deleted,
moved or renamed in the map. Further wayp
oints can be added vi
a the selection from
the map or the input of the GPS position. If yo
u wish to edit a waypoint tour other than
the one displayed, you must first of all press the function key and then the button .Display a waypoint tour– Press on the function key in the menu
Waypoint navigation
.
– Press on the function key in the pop-up window.– If a tour is already being displayed in the menu
Waypoint navigation
you must
select by pressing in the following menu whether you wish to display the indicated
or a .
– Give a short and clear name to the waypoi
nt tour. Confirm the displayed name by
pressing .
– Select an acceptance mode by pressing the respective key.– Press the function key to allow the system to automatically set the
waypoints (recommended) during the display.
– Press the function key if you wish to
set all waypoints yo
urself during the
display.
– After starting the display, the number of
used and still available waypoints as well
as the set display mode will be indicated in the menu
Waypoint navigation
.
– Press the range selector key to ch
ange into the map display. Repeated
pressing of the range selector key will open and close the split-screen ⇒ fig. 20
.
– Press on the range selector key
to switch back into the main menu
Waypoint
navigation
.
– Press the function key to set the waypoints manu-
ally. When in the map display you can find this function key in the pop-up window for the function key
⇒fig. 20
⇒page 47, “Function key in the map
display”.
Function key in the map display The waypoints used up to now for the tour an
d those still available are indicated in the
function key . Pressing the function key
⇒fig. 20
opens a pop-up window for controlling the
display.
- ends the recording; the last set
waypoint becomes the endpoint of the
waypoint tour.
- switches on and off the functi
on indicating that the waypoints
are set automatically via the sensors in the ve
hicle when changing th
e direction. A tick
in the check-box
= indicates that the function is switched on.
- sets a manual waypoint at the current driving
position.Driving a stored waypoint tourBefore you start driving a waypoint tour, you must be in the vicinity of the desired starting point of this waypoint tour.
Edit waypoint tour
Memory
Edit waypoint tour
Fig. 20 Display in the map illus- tration with a split-screen in the compass display.
Waypoint tourEdit waypoint tour
Extend existing tour
New tour
OK
Automatic
Manual
MAP
MAPNAV
Save current position as waypointRecord
RecordRecord
Record
Stop= Automatic recordingSave current position as waypoint
s32k.a.book Page 47 Friday, September 18, 2009 1:54 PM

Range selector key NAV (Navigation)
49
Route guidanceStarting and stopping route guidanceSelect a travel destination or enter a tour and start the route guidance as described in the respective chapter. The unit will
switch over to the map display
⇒fig. 21
.
Route guidance in the map display– Press on the function key in the map display and on
⇒fig. 21

in the pop-up window to interrupt the route guidance.
– If you press the function keys and in the opening
pop-up window the route guidance wi
ll continue at the current position.
Route guidance in the main menu Navigation– Press the range selector key after route guidance has started to switch to the
main menu
Navigation
.
– Pressing the function key will interrupt the route guidance and “
Start
” will be
displayed again the function key.
– If you press on the function key the route guidance will continue at the
current position.
Select one of three alternative routes– If you have selected the function “
Suggest 3 alternative routes
” in the menu
Setup Navigation
, three selected routes to the chosen travel destination will be
calculated after the start of route guidance.
– If the calculation is terminated, three routes to the destination will be indicated in
the overview map. The three routes correspond to the selectable route options “Options”, “Fastest” and “Shortest” route.
– You are given further information to the respective route in the function keys on the
right. Route guidance will start on the sele
cted route as soon as you press one of
these function keys. The route options for the navigation are changed according to the selected route. You can change the route options at a later time.
After route guidance has started, the route becomes the first travel destination and is calculated according to the specified information. When switching to the map display, the map wi
ll always be opened in the last selected
type of display (2D, 3D, topographic).Receiving driving recommendations– Press the button on the unit, if you
wish to repeat the last audible driving
recommendation.
Fig. 21 3D map display during a

route guidance.
 ... /...
Stop route guidance
Navigation
Start route guidance
NAVStop
Start
Fig. 22 Optical driving recom- mendation in the split-screen of the map display.
A8
s32k.a.book Page 49 Friday, September 18, 2009 1:54 PM

Range selector key MAP
54For further functions of the navigation syst
em, e.g. changing the travel destination,
open the main menu
Navigation
by pressing the range selector key .
The function key in the map display during a route guidance Pressing the function key
⇒page 53, fig. 24
will open a pop-up window with
set-ups for route guidance.
- stops route guidance at the cu
rrent position. The route guidance
can be continued at any time by pressing the function key and
.
- calls up the menu
New dest.
in order to enter a stopover to
be approached during
current route guidance.
- used for the manual entry of a congestion ahead and the recom-
mendation of the next available route.
- to change the parameters for route calculation.
- stores the current vehicle position
as flagdest. in the destination memory.
For further functions of the navigation, open the main menu
Navigation
by pressing
the range selector key . Control media source The function key displays the currently selected media source (here the radio station “Radio 2”). To control the selected media source, briefly press the function key and select a station (radio mode) or title (media mode) by pressing the selection in the pop-up window. Radio mode:
The six station keys of the main menu
RADIO
are faded in.
Media mode:
The title name and the function ke
ys for controlling the current media
source are faded in. Function keys Pressing the function key will open a
pop-up window for further set-ups and
displays.
- shows the currently selected travel destination in the map display in
the main menu
Navigation
. Use the function key on the right under the compass
display to center the map ag
ain on the vehicle position.
- changes between day and night design.
- opens the split-screen. The split-screen can be opened or closed in the
map display by pressing the range selector key .
- during route guidance, when driving and turning on roads with
more than one lane, a small split-screen with
lane guidance will be inserted in the map
display. A tick in the check-box
= indicates that the function is switched on.
- switches the touch-screen
into energy save mode.
Scale modification and display Pressing the function key with the display
of the currently selected map dimension at
the bottom right will insert further function
keys for changing the map detail and the
map scale. If not used, these function
keys fade out again after five seconds.
- briefly switches the map display to the
overview display (small scale). It returns
again to the last display (large scale) after a few seconds. or - to zoom in or out of the map, i.e.
changing the map scale. Alternatively, move
the sliding regulator
? within the scale.
- switches to the overview map with start and finish point during route guid-
ance.
- for switching on the autozoom during a route guidance. If “Autozoom” is active,
the map scale will change automatically depending on the driven route (Motorway trip: large map scale - city: small map scale). The switched-on Autozoom is displayed in the scale display by
{. Press again to switch off
or manually change the scale
with the set button . Display favourite symbol A favourite category can be determined for stored destinations. Favourite destinations are displayed in the map, depending on set-up, with their assigned favourite symbol.
NAV
 ... /...... /...
Stop route guidance
Navigation
Start route guidanceEnter stopover destinationCongestion aheadRoute options$
NAV
Radio 2Extras
Extras
Destination viewDay/night
Split-screen
MAP
=Lane guidanceSwitch off display/+
-
h-3
{
{
A8
s32k.a.book Page 54 Friday, September 18, 2009 1:54 PM