display SKODA SUPERB 2005 1.G / (B5/3U) SymphonyTape Car Radio Manual

7Reverse button
• Briefly press the button 7during cas-
sette play to select the other cassette
side. The tape run direction is indicated
by "PLAY FOR" or "PLAY REV" in the
display.
If the cassette side changes automatically
during cassette play, the casssette may
jam. In this case, select the fast wind or
rewind function. If this does not remove
the fault, use another cassette.
ANT
TP
Insert the cassette fully into the cassette
compartment. When inserting a cassette,
the radio switches automatically to cas-
sette play.
The tape run direction is indicated by
"PLAY FOR" or "PLAY REV" in the display
5Dolby® button
• Briefly press the Dolby® button 5during
cassette play to switch on and off the
Dolby noise reduction system.
If the Dolby noise reduction system is
activated, the Dolby® symbol

appears
in the display.ß`Fast forward and rewind
Pressing

or of the rocker ß`se-
lects fast rewind or forward, respectively.
The tape run direction is indicated in the
display.
"WIND FOR" – fast forward
"WIND REV" – fast rewind
Briefly pressing the rocker
ß`ends the fast
forward or rewind function.
15
GB
CASSETTE MODE
Cassette compartment Fast forward and rewind Reverse function
cassette ejection
12
7

At tape end, the cassette side changes
automatically (Autoreverse).
Cassette ejection
• Press and hold down the button
7
during cassette play to eject the cassette
(motor ejection).
When in cassette mode, the MSS system
searches automatically the beginning of
the next or of the current music piece and
starts playback.
To select the desired search direction,
briefly press
or of the rocker ß`.
The search direction is indicated in the
display.
"MSS FOR" – forward,
"MSS REV" – reverse.
!The pauses between the music
pieces must last at least 3 seconds
to ensure the MSS function.
When the TP function is activated during
cassette mode, cassette play is automati-
cally interrupted during a traffic announce-
ment so that this can be heard.
If the transmission range of the traffic
station tuned to is left, the radio will auto-
matically search a new traffic radio station.
Briefly press the TP button
7if you wish
to abort a traffic announcement and to
continue cassette play.
A new traffic announcement is heard
again.
16
Music search system (MSS) Cassette mode and traffic
radio programme
CASSETTE MODE
12

ßWSource selection button
• Briefly press the button ßWto switch bet-
ween the programme sources "FM/AM",
"TAPE" or "CD".
Selecting a CD
• Press one of the station buttons ßRto
change the CD in the magazine. If no CD
is inserted, "NO CD" and the CD number
appear in the display. When the CD is
changed, "LOAD" and the number of the
selected CD appear in the display.
TP
Selecting and repeating a track
• Press on
or of the rocker ß`to
select the CD tracks in the desired direc-
tion. The number of the selected track
appears in the display.
CD play is started automatically.
Playing tracks in random order
• Press a longer time on
or of the
rocker
ß`to switch on the random play
function. "SHFFL" appears in the display.
Press the button
ß`again (long pressure)
to return to normal play. "PLAY" appears
in the display.
Fast forward and reverse
• Press on


or of the rocker ß`to
listen to the tracks in “quick preview”
mode at reduced volume.
Playing tracks for about 8 seconds
• Press the SCN button
´Ito play every
track on a CD for about 8 seconds.
"SCAN" appears in the display. Press the
SCN button
´Iagain to return to normal
play. "PLAY" appears in the display.
Traffic announcements
• Press the button ß?to switch on the traf-
fic announcement standby mode. "TP"
appears in the display. During traffic
announcements, CD play is interrupted.
Press the button
ß?again to abort the
current traffic announcement. "TP" dis-
appears in the display. A new traffic
announcement will be heard again. A
new traffic announcement will be heard
again.
Ending CD play
• Press the C/D buttonßWor the A/F button
ßIto change the programme source. CD
play then is ended.
17
GB
CD CHANGER MODE
11
14

Pressing the TP buttonß?for more than 2
seconds enables you to carry out special
settings and special RDS functions.
To select the individual Setup menu items,
use the two rockers


and ß`.
It is possible to select the following menu
functions.
• TM
• SYNC
• TAVOL
• LRN
• REG
• LOC
• MONO
• ONVOL
• LOUD
• IGN
• RM
• PHONE OFF/ON/IN
• PHONE 0 ... 47
• GALA
• CODE/SAVE
• LED
• BEEP
Exit the Setup menu
Press the TP button
ß?to save your chan-
ged settings and to exit the Setup menu.
TM
The TM function enables you to manually
set the time.
Press
or of the rocker ß`to set the
time.
With the "SYNC ON" function, the time is
corrected if an RDS station is received.
If the RDS station received should trans-
mit a not desired time, switch off the time
correction by selecting the "SYNC OFF"
option.
SYNC ON/OFF
With "SYNC ON" selected, the built-in
clock is corrected (synchronised) by the
RDS information received.
In regions where no RDS TIMER signal
can be received, the synchronisation can
be switched off by selecting the "SYNC
OFF" option.
• Press
or of the rocker ß`to select
the desired function. TAVOL
The TAVOL function enables you to adjust
the minimum volume for traffic announce-
ments.
If the current volume is lower than the
TAVOL setting, the volume of the traffic
announcement will be increased to the
TAVOL setting.
• Select TAVOL in the setup menu.
"SETUP TAVOL" and the current setting
appear in the display.
• Use the control knob/push button
1to
select the desired setting. The setting
range is 02 – 15.
LRN ON/OFF
If you are driving in a region where the
reception of RDS programmes with traffic
announcements is poor, you may prevent
the automatic station search in radio
mode.
"LRN ON" automatic LEARN desired,
"LRN OFF" automatic LEARN not desired.
• Press
or of the rocker ß`to select
the desired function.
18
The Setup menu
SETTINGS

• Use the control knob/push button 1to
select the desired setting. The setting
range is -- – 47.
LOUD ON/OFF
The Loudness function improves the
sound at low volume.
The function is activated if "LOUD ON" is
shown in the display.
IGN ON/OFF
Switching on and off with the ignition
switch.
"IGN ON" You may switch the car radio on and off with the ignition
switch of the vehicle.
"IGN OFF" You may switch the car radio on and off only with the "IO"
button.
• Press
or of the rocker ß`to select
the desired setting.
REG ON/OFF
If the reception quality gets poor, your car
radio first only selects an alternative fre-
quency of the current station.
However, if the reception quality gets so
poor that a lose of the station becomes
possible, the radio will also accept fre-
quencies of a “related” station.
The "REG ON/REG OFF" function ena-
bles you to select whether alternative
frequencies with identical programme are
to be tuned to with the help of the RDS
signal, that is, regional stations are only
selected in the case of emergency.
• Select REG ON/REG OFF in the Setup menu.
"SETUP" and the current setting are
displayed. The "REG ON" setting is
preset at the factory.
• Press
or of the rocker ß`to select
the desired setting.
REG OFF: free change between all regio-
nally related stations.
REG ON: preferred change between identi-
cal programmes; in the “case of emergen-
cy” also change to a regional programme.
LOC ON/OFF
The LOC ON/OFF function is used to
adjust the station search sensitivity.
Maximum station search sensitivity when
"LOC OFF" is shown in the display.
MONO ON/OFF
The MONO ON/OFF functionis used to
select between mono and stereo sound.
ONVOL
With the ONVOL function you may limit
the maximum switch-on volume.
Normally the last adjusted volume will be
recovered when switching the car radio
on. However, if the switch-off volume is
higher then the ONVOL setting, the
switch-on volume will automatically be
limited to the ONVOL setting.
• Select ONVOL in the Setup menu. "SETUP ONVOL" and the current setting
appear in the display.
19
GB
SETTINGS

20
It is possible to individually adjust this
speed dependent volume control.
• Select GALA in the Setup menu."SETUP GALA" and the current setting
are shown in the display.
• Use the control knob/push button
1to
select the desired setting. The setting
range is 1 – 9.
1 = minimum effect
9 = maximum effect
Select the "NO" option to switch the
GALA function off.
Use the control knob/push button
1to
adjust the basic volume (e.g. for different
radio stations or cassettes). The speed
dependent volume control continues to
operate automatically
CODE/SAFE
If "CODE" appears in the display, coding
is not activated.
If "SAFE" appears in the display, coding is
activated.
The way how to activate and deactivate
the coding is described on the the follow-
ing pages.
RM
With "RM ON" selected, the radio swit-
ches to the last selected radio programme
when fast forward winding or rewinding
the cassette.
PHONE OFF/ON/IN
The PHONE function enables you to se-
lect whether a telephone call is to be
heard via the loudspeakers when a mobile
telephone is connected.
• Select PHONE in the Setup menu. "SETUP PHONE" and the current
setting "ON", "IN" or "OFF" appear in the
display.
• Press
or of the rocker ß`to select
the desired setting.
"PHONE OFF": no interpretation of the
telephone connection.
"PHONE ON": the car radio is automati-
cally muted on reception of a telephone
call.
"PHONE IN": the car radio is automatically
muted on reception of a teelephone call
and the conversation is heard via the loud-
speakers.
SETTINGS
PHONE 0 ... 47
The PHONE function is used to set the
minimum telephone sound volume.
If the current volume is below the
"PHONE" setting, it will be boosted to this
setting if a telephone call is received.
• Select the PHONE menu item. "SETUP PHONE" and the current setting
are shown in the display.
• Use the control knob/push button
1to
select the desired setting. The setting
range is 00 – 47.
GALA
With increasing vehicle speed the noise
level inside the vehicle is increasing too.
So far it has been necessary to manually
adjust the radio’s volume to this noise
level.
Today, the GALA (Geschwindigkeits-
Abhängige-Lautstärke-Anpassung =
speed dependent volume control) function
automatically adjusts the volume accor-
ding to the vehicle speed.

21
GB
LED ON/OFF
Switching the security LED on and off.
"LED ON" The security LED is on.
"LED OFF" The security LED is off.
• Press on
or of the rocker ß`to
switch the desired function on.
BEEP ON/OFF
Switching the sound signal on and off.
"BEEP ON" Sound signal as function confirmation.
"BEEP OFF" Function confirmation by brief muting of the loud-
speaker outputs.
• Press on
or of the rocker ß`to
switch the desired function on.
Convenience radio coding
In teh event that you did not receive the
security code for your radio, this is becau-
se your car is equiped with the convenien-
ce system of coding for which this code is
not needed. In the battery is disconnected
and then re-connected, first of all switch
the ignition on with the key and then, after
this, the radio. Should you nevertheless
wish to have the security code, please
contact your ·koda dealer.
Deactivating the electronic security
system
If the electronic security system has
locked the car radio for any reason, for
example, when the car battery has been
disconnected or a fuse has blown, “SAFE”
appears in the radio’s display after swit-
ching on.
• After about 1 second, "1– – – –" appears in the display.
If you now enter the correct code number,
the electronic security system can be
deactivated.
If is absolutely necessary to follow the
order of the operational steps:
• Switch the radio on: "SAFE" appears in the display.
• After about 1 second, "1– – – –" appears in the display (1 stands for the
first attempt).
• Use the station buttons
ßRto enter the
code number which is to be found on the
radio card.
Briefly press the station button 1 to
enter the first digit of the code number,
then station button 2 for the second
digit, etc.• When this is done, press for more than 2 seconds on



or of the rocker ß`then
release the pressure.
• If you have entered the correct code, the frequency will be displayed after a few
moments.
The car radio is operational again.
!If you should have lost the radio
card with the code number, please
contact a Skoda service point.
Coding
SETTINGS THEFT PROTECTION CODING

22
Security diode
Activating the electronic security
system
Press the TP button ß?to display the
Setup menu.
• Select the "CODE/SAFE" function.
• Press
or of the rocker ß`.
• "1– – – –" appears in the display.
• Use the station buttons
ßRto enter the
code number which is to be found on the
radio card.
Briefly press the station button 1 to
enter the first digit of the code number,
then station button 2 for the second
digit, etc.
• When this is done, press for more than 2 seconds on


or of the rocker ß`
then release the pressure.
• If you have entered the correct code, “SAFE” will be displayed after a few
moments.
The car radio is locked again.
THEFT PROTECTION CODING
The security diode ßUflashes if the radio
is switched off and the ignition key is
removed.
›19
Incorrect code number
If you enter an incorrect code number
when attempting to deactivate the electro-
nic security system, "SAFE" appears after
about 10 seconds and then “2 – – – –”
(2nd attempt) in the display.
You may then repeat once the entire
operation. The number of attempts is
indicated in the display.
If you enter an incorrect code number
again, the radio will be locked for the
waiting times indicated in the table below.
Waiting times between attempts:
Attempt Waiting time
(display) (approximately)1 10 sec.
2 1.5 min.
3 5 min.
4 21 min.
5 1.5 hrs.
6 6 hrs.
7 24 hrs.
8 24 hrs.

24
Connections
CD changer/CD player, mobile telephone,
AF muting, booster.
For more information, contact a Skoda
service point.
Display
Frequency, station name, waveband,
station button, TP (traffic programme),
cassette functions, CD functions (only
with connected CD changer/CD player).
Max. output power
4 x 20 Watt (max.),
4 x 17 Watt (to DIN in 4 Ohm).
Illumination
Anti-glare illumination of the control ele-
ments and the display when the vehicle
illumination is switched on (night design).
The brightness can be adjusted together
with the instrument board illumination.
Waveband selection
By touch buttons.
Cassette player
Wear-resisting high-performance sound
head, automatic tape type recognition,
rocker for fast forward and rewind, electro-
motoric cassette ejection, automatic stop
at tape end and switch-over to radio
reception in the case of traffic announce-
ments, automatic change of cassette side
at tape end (autoreverse), music search
system (MSS).
Theft protection
Electronic security system locking the
radio when the power supply is discon-
nected. The radio can be put into opera-
tion again only by entering the correct
code number.
Reception ranges
FM, AM (MW).
Interference suppression
The automatic interference suppression
integrated in the radio eliminates most
interferences during FM reception.
Special intereference suppression circuits
eliminate most interfering impulses gene-
rated by the motor and other parts of the
electrical system, for example, ventilator,
windscreen wiper, etc.
Station selection
Automatic play of the last station tuned to
(last station memory) in radio mode.
Six station buttons each for AM1/AM2,
FM1/FM2. Direct manual tuning for RDS
stations. Manual tuning possible in the
direction of high or low frequencies. Micro-
computer-controlled stabilization of the
transmission frequencies (PLL quarz-
tuning).
Traffic radio programme functions
Automatic station search, automatic traffic
announcements, switch-over to mono
during traffic announcements.
Audio functions
Stereo (radio, cassette and CD), active
tone control, sound balance control inte-
grated in the radio, speed-dependent volu-
me control (GALA), multiple loudspeaker
system.
BRIEF TECHNICAL DESCRIPTION
The indications in this user manual comp-
ly with the information available at the day of printing.
Subject to technical modifications.
This paper has been made of chlorine- free and bleached pulp.