length SKODA SUPERB 2005 1.G / (B5/3U) SymphonyTape Car Radio Manual

ßQ– AIM button
Using the AIM function (Automatic Infor-
mation Memory), you may store automati-
cally up to 9 traffic announcements with a
total length of 4 minutes with the help of
the integrated digital voice memory.
Storing traffic announcements
There are 3 different possibilities of storing
traffic announcements:
• When the radio is switched on, every traffic announcement of the station tuned
to is stored as soon as the “TP” function
has been selected ("TP" in the display).
TP
12
ß?– TP button
The TP standby mode allows you to hear
only traffic announcements. Even if the
volume is set to minimum, the traffic an-
nouncements are heard with the program-
med volume – see also page 17. If the
transmission range of the traffic station
tuned to is left, the radio will start after
about 30 seconds an automatic station
search.
Interrupting a traffic announcement
You may wish to interrupt a traffic an-
nouncement in certain situations, for
example
– if the announcement does not concern your route,
– if the announcement is very long and the part concerning you is already com-
pleted.
Briefly press the TP button
ß?while the
announcement you wish to abort is heard.
The announcement will be aborted and
the previous mode, for example radio
reception, cassette or CD play, is conti-
nued. A new traffic announcement will be
heard again.
To switch definitely off all traffic an-
nouncements, deselect the TP range.
RADIO MODE
Traffic programme functions
11
13

Playback of traffic announcements
in chronological order
Press the AIM buttonßQ. Playback is started
with the last stored traffic announcement
and is continued till the oldest announce-
ment. The display indicates, for example,
"AIM 4 15:35".
– "AIM" AIM playback
– "4" 4th announcement
– "15:35" Time of storage
If no traffic announcement has been stored,
"AIM NO MSG" appears in the display.
Playback of traffic announcements
in random order
• With the AIM function activated, press quickly twice on the manual tuning
rocker
ß`during playback.
• You may then use the rocker
ß`to skip
forward and reverse between the stored
traffic announcements.
Repeating traffic announcements
Press on the left side of the manual tuning
rocker
ß`during playback. The current
traffic announcement is repeated.
13
GB
• Storage standby: 2 hours.
1 – Activate the TP function using the TP button
ß?.
2 – Switch the radio off.
"AIM 2 h" appears in the display. This
means that 2 hours of traffic announce-
ments will be stored.
• Storage standby: 24 hours.
Proceed as described above.
3 – Press the AIM button
ßQfor about
1 second.
The station last tuned to and then
"AIM 24 h" appears in the display. Now
24 hours of traffic announcements will be
stored.
!If the voice memory is full, the
oldest announcement will be
overwritten (deleted).
!In the case of a message having a
length of more than 4 minutes the
beginning is overwritten.
A signal sounds to indicate you that
the entire message could not be
recorded.
Station buttons
You may store up to 24 stations on the
6 station buttons in connection with the
respective memory levels.
FM1/FM2 range = 6 stations each
AM1/AM2 range = 6 stations each
"FM2" means that you are in the second
memory level. Press the A/F button
ßIto
switch between the memory levels.
ANTENNETP
RADIO MODE