service SKODA SUPERB 2005 1.G / (B5/3U) SymphonyTape Car Radio Manual
[x] Cancel search | Manufacturer: SKODA, Model Year: 2005, Model line: SUPERB, Model: SKODA SUPERB 2005 1.G / (B5/3U)Pages: 26, PDF Size: 1.38 MB
Page 12 of 26
11
GB
When storing RDS stations you should
press the corresponding station button
only when the station name appears in
the display. This ensures that all RDS
information has been interpreted and
stored automatically.
When calling up stored RDS stations,
the corresponding station name is display-
ed. If the stored frequency is too weak for
good reception, the radio searches auto-
matically for an appropriate alternative fre-
quency (best station function).
If non of the stored alternative frequencies
is strong enough for good reception, the
desired station cannot be received at the
moment. In this case, tune to another sta-
tion.
!Please make sure that the station
name is displayed when the station
is stored. If a moving text should be
displayed, this will be stored
instead of the station name.
Information about How does RDS work?
RDS stations
In many European countries, RDSis al-
ready transmitted by many radio stations.
The goal is to provide an overall coverage.
With this system, an inaudible digitized
data current is transmitted in addition to
the normal FM radio signal, providing the
RDS receiver with information in encoded
form which controls, among other things,
the following functions:
• Programme identification (PI code)
With the help of the PI code, the radio
recognizes the currently received station.
• Programme service name (PS code)
The PS code transmits the station name
which is shown in the display.• Alternative frequencies (AF code)
Because of the limited transmission
range of the FM waves, the programme
of one radio provider is transmitted by
several stations on different frequencies.
The AF code informs the radio about all
alternative frequencies of the same pro-
gramme.
This enables the radio to tune to the fre-
quency which can be received in the best
quality.
Tuning to another frequency is carried
out in an inaudible way.
The station name in the display remains
unchanged.
While you are driving, the RDS radio
searches permanently for alternative
frequencies of the station selected and
tunes to this in an automatic and nearly
inaudible way.
• Traffic programme identification (TP code = Traffic programme)
This information tells the radio that it is
currently receiving a traffic programme
station.
RADIO MODE
Page 22 of 26
21
GB
LED ON/OFF
Switching the security LED on and off.
"LED ON" The security LED is on.
"LED OFF" The security LED is off.
• Press on
or of the rocker ß`to
switch the desired function on.
BEEP ON/OFF
Switching the sound signal on and off.
"BEEP ON" Sound signal as function confirmation.
"BEEP OFF" Function confirmation by brief muting of the loud-
speaker outputs.
• Press on
or of the rocker ß`to
switch the desired function on.
Convenience radio coding
In teh event that you did not receive the
security code for your radio, this is becau-
se your car is equiped with the convenien-
ce system of coding for which this code is
not needed. In the battery is disconnected
and then re-connected, first of all switch
the ignition on with the key and then, after
this, the radio. Should you nevertheless
wish to have the security code, please
contact your ·koda dealer.
Deactivating the electronic security
system
If the electronic security system has
locked the car radio for any reason, for
example, when the car battery has been
disconnected or a fuse has blown, “SAFE”
appears in the radio’s display after swit-
ching on.
• After about 1 second, "1– – – –" appears in the display.
If you now enter the correct code number,
the electronic security system can be
deactivated.
If is absolutely necessary to follow the
order of the operational steps:
• Switch the radio on: "SAFE" appears in the display.
• After about 1 second, "1– – – –" appears in the display (1 stands for the
first attempt).
• Use the station buttons
ßRto enter the
code number which is to be found on the
radio card.
Briefly press the station button 1 to
enter the first digit of the code number,
then station button 2 for the second
digit, etc.• When this is done, press for more than 2 seconds on
or of the rocker ß`then
release the pressure.
• If you have entered the correct code, the frequency will be displayed after a few
moments.
The car radio is operational again.
!If you should have lost the radio
card with the code number, please
contact a Skoda service point.
Coding
SETTINGS THEFT PROTECTION CODING
Page 25 of 26
24
Connections
CD changer/CD player, mobile telephone,
AF muting, booster.
For more information, contact a Skoda
service point.
Display
Frequency, station name, waveband,
station button, TP (traffic programme),
cassette functions, CD functions (only
with connected CD changer/CD player).
Max. output power
4 x 20 Watt (max.),
4 x 17 Watt (to DIN in 4 Ohm).
Illumination
Anti-glare illumination of the control ele-
ments and the display when the vehicle
illumination is switched on (night design).
The brightness can be adjusted together
with the instrument board illumination.
Waveband selection
By touch buttons.
Cassette player
Wear-resisting high-performance sound
head, automatic tape type recognition,
rocker for fast forward and rewind, electro-
motoric cassette ejection, automatic stop
at tape end and switch-over to radio
reception in the case of traffic announce-
ments, automatic change of cassette side
at tape end (autoreverse), music search
system (MSS).
Theft protection
Electronic security system locking the
radio when the power supply is discon-
nected. The radio can be put into opera-
tion again only by entering the correct
code number.
Reception ranges
FM, AM (MW).
Interference suppression
The automatic interference suppression
integrated in the radio eliminates most
interferences during FM reception.
Special intereference suppression circuits
eliminate most interfering impulses gene-
rated by the motor and other parts of the
electrical system, for example, ventilator,
windscreen wiper, etc.
Station selection
Automatic play of the last station tuned to
(last station memory) in radio mode.
Six station buttons each for AM1/AM2,
FM1/FM2. Direct manual tuning for RDS
stations. Manual tuning possible in the
direction of high or low frequencies. Micro-
computer-controlled stabilization of the
transmission frequencies (PLL quarz-
tuning).
Traffic radio programme functions
Automatic station search, automatic traffic
announcements, switch-over to mono
during traffic announcements.
Audio functions
Stereo (radio, cassette and CD), active
tone control, sound balance control inte-
grated in the radio, speed-dependent volu-
me control (GALA), multiple loudspeaker
system.
BRIEF TECHNICAL DESCRIPTION
The indications in this user manual comp-
ly with the information available at the day of printing.
Subject to technical modifications.
This paper has been made of chlorine- free and bleached pulp.