ESP SKODA YETI 2010 1.G / 5L Columbus Navigation System Manual

General information
3
General informationEquipment overview
Switching on/off
: Control button for switching the navigation system
on/off (press) and volume control (turn) Range selector key
for selecting the corresponding menu:
−
- changes over into the radio mode and changes the
frequency range when in the radio mode. −
- changes over to the last played media source or selects a
new media source. −
- activates the phone function* - if required muting of the
current audio source. −
- opens the sound and volume settings menu.
−
- switches over to the map with the display of the current
vehicle position or route during ro
ute guidance. A split-screen with
further information will fade in or fade out. −
- switches over to navigation.
−
(TMC)- switches on the stored traffic reports display (
Traffic-
M essage-
Channels).
−
- enables setting-up the individual fields.
°and°
: The backwards/forwards keys
operate the “active” audio
source. − RADIO-Mode
- for the selection of the stations from the preset list.
− MEDIA-Mode
- for the selection of the previous or following track.
− TV-Mode
- for the selection of the TV stations.
CD/DVD case Touch-screen (Touch-screen):
Fields circled in colour on the touch-
screen are presently “active” and are operated by touching the screen. Eject key
- press briefly to move an inserted CD/DVD into the posi-
tion ready for removal.
- activates the voice control of the unit.
Setting up button
− RADIO mode
- turn for manual station adjustment; press briefly to
start/stop the auto
matic play (Scan).
− MEDIA-Mode
- turn to change track; press briefly to start/stop the
automatic play (Scan) when in audio mode. − Tu r n
map display (MAP)
- in order to change the map scale; press
briefly for repeating a navigation
announcement during active route
guidance. − Navigation
- press briefly to repeat
a navigation announcement
during active route guidance. Memory card case
: Memory cards such as SD (Secure Digital Memory
Cards), MMC (Multimedia Cards) measuring 32 mm x 24 mm x 2.1 mm and with a capacity of up to 4 GB as
well as SDHC (Secure Digital High-
Capacity Memory Cards) wi
th a capacity of up to 32 GB are available. The
case for the memory card is located under the screen.
Explanation of symbols * items of equipment which are marked in such
a way are only installed as standard on
certain models or are supplied as special equipment.ž End of a section.b The section is continued on the next page.Important informationWarrantyThe equipment warranty terms and cond
itions also apply for new vehicles.
Note
Damage within the meaning of the warranty
must not be the result of improper
handling of the system or from unprofessional
repair attempts. It is also essential that
there is no external damage.
A1A2
RADIOMEDIAPHONETO NEMAPNAVTRAFFICSETUP
A3
ƒ
„
A4A5A6
š
A7

A8
A9
s32k.a.book Page 3 Friday, September 18, 2009 1:54 PM

General information
4Information on how to operate the navigation systemThe requirements of today's road traffic demand the driver’s full concentration at all times. Apart from the availability entertainmen
t, the extensive and demanding equipment
details of this system also offer a wide range of information, which will help you to reach your destination quickly and safely. But you should only operate the navigation system with its wide range of possi- bilities when the traf
fic situatio
n allows.
The volume settings must be selected in
such a way that audible signals from the
outside, e.g. a Martins horn from utility
vehicles (police cars, ambulances and fire
brigade), can be heard at all times.
WARNING
Please concentrate fully at all times on yo
ur driving! As the driver you are fully
responsible for road safety. Only use the functions in such a way that you are always in full control of your vehicle in all traffic situations!Before using the navigation system•
Please observe the respective traffic regulations when driving.
•
Street and location names can be changed.
It is therefore possible that, in excep-
tional cases, the names stored on the na
vigation DVDs do not correspond to the
changed names.•
The route calculated by the navigation
system is a recommendation for reaching
the intended destination. While driving please pay attention to traffic lights, one-way streets, lane change restrictions, canals and ferries.
WARNING
Road traffic legislation (StVO) applies at
all times, even if a driving recommen-
dation contradicts the StVO.
Caution
•
Inserting a second CD/DVD while a CD/D
VD is being ejected can destroy the
CD/DVD drive in the unit. Please note that
the CD/DVD ejection lasts a few seconds
after pressing the
Eject key
. During this time the lock
in front of the CD/DVD case
is open. It is essential that
you wait until the CD/DVD has
been fully ejected before you
try to insert a new CD/DVD.•
Press the buttons and the keys of the unit gently in order to avoid damaging them.
Gentle pressure on the appropriate key is sufficient to operate the unit. Please note that the control buttons have predetermined breaking points, in order to reduce the risk of injury.•
Do not use any pointed or sharp-edged objects to operate the touch-screen. Slight
finger pressure sufficient to operate the equipment. A display on the screen, which cannot be called up by pressing the button,
is therefore not available at that time.
•
Please note that a dirty or scratched na
vigation DVD can cons
iderably impair the
speed and the functions of
the navigation system.
Note
•
Your navigation system is a high-powered
computer. Just as your computer at
home, this unit needs a few seconds for proc
essing complicated control sequences. In
such a case it is possible that the unit wi
ll no longer react when operated from the
outside until the triggered processes have
been dealt with processed in the back-
ground. Please be patient, as it is quite po
ssible that the unit “stores” the carried-out
operating steps even if it does not appear to react to the operation from the outside. These operating steps are processed one after the other by the unit once the processes in the background have been completed, which can be confusing.•
The DVD drive installed into this unit uses a Dolby Digital
® Audio coding system
and MLP Lossless
® for highest reproduction quality even with standard Audio DVDs.
“Dolby
®”, “MLP Lossless
®” and the Double-D-Symbol are trademarks of Dolby Labo-
ratories
®.
•
With the help of “DTS
®” and “DTS 2.0
®” the surrounding sound of a DVD is trans-
formed and replayed in best stereo quality. “DTS
®” and “DTS 2.0
®” are registered
trademarks of DTS, Inc.•
WMA audio data (Windows Media Audio) can also be replayed by the unit and
stored on the hard disk (HDD) providing
this has not been protected by the DRM
š
s32k.a.book Page 4 Friday, September 18, 2009 1:54 PM

General information
7
– In the main menu press, for example
Setup
on the function key
⇒page 6,
fig. 1
, to call up the menu
Setup Radio
⇒page 6, fig. 2
. The headline indicates
which menu you are in .
– By using the function key you can
change back from each menu to the
previous menu.
Moving objects or regulators– Place your finger on the display of a
moving object on the touch-screen, for
example the “sliding regulator” in a “scrollbar”
⇒page 6, fig. 2
.
– Now move your finger
over the touch-screen
without interruption
. The object will
follow your movements, but can only
be moved within the pre-defined range.
– Lift the finger from the touch-screen at the desired position.– To view the displayed menu section
⇒page 6, fig. 2
move the right sliding regu-
lator in the scrollbar co
mpletely to the bottom.
– Alternatively, you can move
the sliding regulator on
the touch-screen to the
bottom and top by touching the function keys and .
– A sliding regulator in a set-up bar
? can alternatively be moved by pressing or
For example, on the touchscreen set-ups for the Video-DVD operation.
Voice control– Briefly press the function key in order to activate the voice control, so-called
“ Speek what you see
”.
– Then give your command or
follow the system guidelines.
If none of the function keys are displa
yed on the touch-screen when the unit is
switched on (e.g. when a DVD is playing), press briefly on the touch-screen so that the currently available function keys are shown. “Scrollbar” The vertical bar on the right side of the touch-screen with a sliding regulator between the arrow keys and is called a “s
croll bar”. It indicates that further menu
entries become visible if the sliding regu
lator is moved completely to the bottom.
“Pop-up window” A function key with an arrow
b behind another function
key shows the presently
selected set-up, e.g. with
⇒page 6, fig. 2
.
If you press the function key on the
touch-screen, a so-called “pop-up window”
will open in which all possible
set-up options are displayed.
Briefly press the desired set-up option. Th
e pop-up window will disappear and the
newly selected set-up option is displayed in the function key . To close the pop-up window without changing the set-up, press th
e function button in the pop-up window
. “Check box” Some functions can only be switched on or off. There is a so-called “check-box”
⇒page 6, fig. 2
in front of a function which can
only be switched on or off. A tick in the check box
= indicates that the function is
switched on, an empty check box
>, indicates that it is switched off.
Briefly press the corresponding func
tion key for switching on or off.
Input mask for free text input
Radio
AAy
ABAC
a
`
-
+

AC
`
a
Fa v. T M C s t a t i o n :
b automatic
AD
b...
b...
O
AE
Fig. 3 Input mask for free text input
s32k.a.book Page 7 Friday, September 18, 2009 1:54 PM

General information
8With some of the menus you can enter a fr
ee text. For instance, when allocating a
folder name for storing MP3 data on the hard
disk or when searching for the name of
a special destination. – Press to accept a character sequence offered by the system or press to
delete the characters in the entry line.
– When in the entry window, press on a character shown on the keypad block to
accept it into the entry line.
– You can also delete or change the charac
ter sequence in the entry line as well as
insert additional characters.
– Press to accept the indicated character sequence in the entry line. By pressing
the input mask will be closed
without the entries being accepted.
Further input possibilities: - changes from upper case to lower case and vice versa. - opens the input mask for digits and special characters. The function key changes
to . Press , to change again to the letter input mask.
- space key for entering spaces. or - moves the character entry cursor (the cursor) in the entry line to the left or right.
- deletes characters in the entry line starting from the position of the character
entry cursor from right to left. Selecting letters based on specific characters Some letters in the input masks are also marked with a small triangle “
a”. This indi-
cates that specific characters based on this letter can be selected. Continue to press down on the correspondin
g function key with
your finger until a
pop-up window with these specific characte
rs can be displayed. Press to accept the
desired character into the entry line - the po
p-up window will close. If no entries are
entered, the pop-up window will clos
e automatically after a few seconds.
Some specific characters can be “written ou
t”. The navigation system will also recog-
nise the character sequence “AE”, “UE” and
“OE” instead of the German specific char-
acters “Ä”, “Ü” and “Ö” vom Navigationssystem erkannt. Other specific characters can
be ignored, for example instead of “É”, “Ê” or
“È” a normal “E” will be accepted by the
navigation system.Input mask for digit entry– Press to accept an indicated character sequence or press , to delete the
characters in the entry line from right to left.
– Press one of the to function keys
in the input mask to accept the corre-
sponding digit into the entry line.
– Press when the correct number is indicated in the entry line. By pressing
the input mask will be closed wi
thout the entries being accepted.
Special functions* Parking aid If your vehicle is equi
pped with “parking aid” and after
it is activated, the distance to
the obstacle is shown on the screen.
OK

OK
y
:;A-Z
A-Z
‚
b

Fig. 4 Input mask for digit entry
OK

0
9
OK
y
s32k.a.book Page 8 Friday, September 18, 2009 1:54 PM

Range selector key SETUP
11
Range selector key SETUPMain menu set-ups (Setup)– Press the range selector key to open the main menu
Setup
.
Overview of the set-up menus
- When in the radio mode, carry out set-ups for the function of the arrow keys,
for the displayed memory keys, the preset list and the TMC traffic reports
⇒page 11,
“Setup radio”.
- Determine the set-ups for the play and display of MP3 data and activate or
deactivate the external audio sources
⇒page 12.
- Update the phone book in the unit, dele
te all call lists and modify the assign-
ment of the shortcut keys.
⇒page 12.
- Change the system set-ups such as voice response, time display of the air
conditioning system*, return to the original set-ups and delete set-ups if necessary ⇒ page 15.
- Adjust the brightness of the touch-screen, day/night design of the map
display and select/deselect the confirmation tone for the key stroke
⇒page 13.
- Carry out set-ups for the map display and select symbols for the display in the
map
⇒page 14, “Setup Map”. - Determine the set-ups for receiving driving recommendations, define or
change an address to a home address and
start a virtual demonstration drive with a
manually set starting point
⇒page 14.
- Select preferred TMC station, ad
just filter for TMC announcements
and activate/deactivate traffic reports
⇒page 15, “Setup traffic programme”.
- setting the dialogue style, the help display and deleting the voice
recordings.
- Carry out set-ups for voice response with an inserted Video-DVD and adjust
the aspect ratio of the touch-screen. It is
also possible to adjust the audio video
standard when operating an external media source
⇒page 15, “Setup Video” as well
as carrying out the set-ups for the TV operation.
Setup radioCall up the menu
Setup Radio
by pressing the range selector key and the func-
tion key on
⇒fig. 5
.
Determining the station selection via the arrow keys – Press on the or , to determine from which list in the radio
mode the stations are to be selected
with the arrow keys. If is selected,
only stored stations from the preset list
are called up using the arrow keys during
station relay. “
Memory
” is displayed at the top left in the main menu
RADIO
.
Regional function RDS (RDS Regional)– Press on the button (regional station) and select a set-up in the
opening pop-up window.
– Select the button , doing so always chooses the frequency for the heard
radio station which offers the best reception at the present time.
SETUP
RadioMediaPhoneSystemTouch-screenMapNavigationTraffic informationVoice controlVideo
Fig. 5 Menu: Setup Radio.
SETUP
Radio
Arrow keys
Station list
Preset list
Preset list
RDS RegionalAutomatic
s32k.a.book Page 11 Friday, September 18, 2009 1:54 PM

Range selector key SETUP
12– When selecting the button , the unit attempts to hold a radio station emitting
regionally long enough until the reception qu
ality is so bad, that there is a risk of a
program loss.
Switching the traffic announcements on or off– In the menu
Setup Radio
, press the function key to switch
the transmission of traffi
c announcements on or off. A tick in the check box
= indi-
cates that the traffic programme f
unction is already switched on.
Selecting preferred TMC station– In the menu
Setup Radio
the function key indicates the TMC
station from which current TMC traffic reports are received.
– Press on the function key behind and choose your prefered
TMC station.
– Press on if you wish your unit to
automatically search for a TMC station.
Delete preset list– Press the function key and confirm the following safety interroga-
tion in order to erase all radio stations stored in the memory list.
You can select the following functions: Preferred TMC station If the “preferred” TMC station can no longer be received, the system automatically searches for the TMC station offering the be
st reception for the currently driven area.
You can determine in the
Setup Radio
from which TMC station the reports are to be
announced.Setup MediaCall up the
Setup Media
menu by pressing the range
selector key and the func-
tion key . – Activate the check boxes before entering details
=, by pressing th
e corresponding
function key.
Function keys in the menu - Setup Media
- for the playback of an optional ex
ternal audio* or video source*, if
a TV tuner is installed.
- for the playback of an external audio source*. - Setting of the input sensitivity for an external source*.
- according to the set-ups the title and performer name or
only the data and folder name will be displayed for audio CDs with CD texts and in the MP3 operation.
- plays all MP3 data one after the other according
to the sequence on the played medium, which are stored in the folders and subfolders.
* - enables a wireless transfer of MP3 data from the telephone
preinstallation.Setup Telephone*Call up the
Setup Telephone
menu by pressing the range selector key and the
function key .Updating telephone book in the unit– Press on the function key to update all entries in the unit,
the telephone book of the mobile phone
or the SIM card entered since the last
connection. This procedure can take a few minutes.
– Confirm the following safety interrogatio
n. The “old” data in the phone book can
still be selected at the unit wh
ile the data is being updated.
Delete call lists– Press on the function key . – If you confirm the following safety inte
rrogation by pressing
, the stored call
numbers of all calls made and calls
accepted in the unit will be deleted.
Modifying assigned shortcut keys– Press the function key to modify the assigned shortcut keys.
Fixed
Traffic programme (TP)
Current TMC stat.: ...
Preferred TMC station
Automatic
Delete preset list
SETUP
Media
Activate AV entryActivate AUX inputAUX input stageDeactivate artist/title nameScan/Mix/Repeat including subfoldersActivate Bluetooth audio
SETUP
Phone
Update telephone bookDelete call lists
Delete
Speed dial
s32k.a.book Page 12 Friday, September 18, 2009 1:54 PM

Range selector key SETUP
13
– To change the assignment of a particular shortcut key, select the respective
shortcut key by pressing the key in the following menu.Note
The selection possibilities of the phone se
t-up depend on the relevant telephone
preinstallation.Setup SystemCall up the
Setup System
menu by pressing the range se
lector key and the func-
tion key .Change the system language manually– Press the button and select the de
sired language in the opening pop-up
window. When selecting the menu point “
automatic
”, the system language is the
language which is set in th
e menu of the information disp
lay. If desired, another
language can be selected for the unit.
Changing system set-ups– You can change the set-up of the distance unit. – You can change the set-up of the time format. – You can change the set-up of the date format.Time display– If you press the function key , while in the menu
Setup System
, the
automatic time display is set in the touch-screen.
– Time display in the operating modes radio, media and map. – The current time is taken over by
the instrument cluster in the vehicle.
– After switching off the unit, the time continues to show.Reset the factory settings on the unit– Press on the function key in the menu
Setup System
.
– Now find the settings you wish to reset. – If you press the function key and confirm the following safety interrogation
the selected settings will be reset to the factory settings and all the stored data will be erased.
“ Time
” and “
Date
” settings need only be carried
out manually under
certain circum-
stances. Time and date will normally be a
ccepted automatically from the vehicle into
the unit.Setup DisplayCall up the menu
Setup Display
by pressing the range selector key and the
function key .Brightness– Press on the function
key behind and select a setting in the pop-up
window.
– Press the function key if the brightness of the touch-screen should
automatically be adapted to the current ligh
t conditions via the sensors on the unit.
– Press one of the other function keys to
manually adjust the brig
htness of the touch-
screen.
Day/night– Press on the function key behind and select a setting in the pop-up
window.
– Press the function key if switching
the headlights on and off should also
change the map display from night to day design.
– Press on the function key or to manually determine the night and day
design of the map display.
SETUP
System
Language
time displayFactory settings
Reset
SETUP
Display
Brightness
Automatic
Day/night
Automatic
Day
Night
s32k.a.book Page 13 Friday, September 18, 2009 1:54 PM

Range selector key SETUP
15
As in this case the unit must first reorient itself it can take some time, depending on the number of the currently tracked satellites, unt
il the unit has again found the real loca-
tion. Drive a short distance. Nav. announcements
- no spoken driving recommendations will be provided.
- spoken driving recommendations are only provided when you have left the
calculated route, for example on the basis
of announced traffic pr
oblems. This setting
is recommended if audible drive recommendat
ions are normally no longer needed for
a daily driven route and navigation is only
used as dynamic naviga
tion. If an audible
driving recommendation is transmitted again on the basis of a change in route, navi- gation announcements must be
switched on again (Display:
).
- spoken driving recommendations will
be transmitted in the running audio
mode. Adjustable average speed Depending on the set average speed, the unit will determine an arrival or driving time during a route calculation and disp
lay it depending on the set-up.
Setup traffic programmeCall up the menu
Setup traffic programme
by pressing the range selector key
and the function key . Selecting preferred TMC station Press on if you wish your unit to automatically search for a TMC station. Select displayable announcements Press if, during route guidance, only
the TMC traffic announcements relating
to the traffic problems along your rout
e should be dislayed. If you press on
, all current TMC traffic announcements are displayed.
Switching the traffic announcements on or off A tick in the check box
= indicates that the traffic programme function is already
switched on.
Setting voice controlCall up the
Setup Voice Control
menu by pressing the range selector key and
the function key .Dialogue style– Select - the system gives the whole message without shortening it or
select - the system shortens some of the messages or replaces them by an audible signal
(gong), thus the operation of the system is accelerated.
Help display– The selected help display shows a range of the most important possible
commands in a pop-up window
Possible commands are
:
Delete voice recordings– Deletes the stored voice recordings for individual menu points.Setup VideoCall up the menu
Setup Video
by pressing the range selector key and the func-
tion key .Changing voice response– Press the function key , or in the menu
Setup Video
and select the desired language in the pop-up window.
– Pressing will fully switch off the display of sub-titles.Changing the aspect ratio of the touch-screen display– The currently set aspect ratio is
visible behind th
e function key .
– Press on the function key and on or in the pop-up window.
All video data will now be repl
ayed in the set aspect ratio.
Set-ups for vehicles with TV tuner If a TV tuner is connected to the unit, you
will find here furthe
r set-up possibilities.
OffDynamicNav. announcements
bOn
On
SETUP
Tra f f i c i n f o
Preferred TMC station
Automatic
Message display
On route
All announcements
traffic announcements
SETUP
voice control
long dialogueshort dialogue
SETUP
Video
Audio language
Menu language
Subtitles
Off
DVD-Format
DVD format
4:3
16:9
s32k.a.book Page 15 Friday, September 18, 2009 1:54 PM

Range selector key RADIO
17
Save radio station– Press on the function key
while in the main menu
Radio
⇒page 16, fig. 7
.
A pop-up window with a range of
memory space groups is opened.
– When you select a memory space group,
a menu for saving six radio stations is
opened.
– Select a memory space and save the stat
ion by pressing on the memory space.
– If a memory space is selected, which already holds a radio station, it will be
overwritten.
Calling up a saved radio stationIf the currently heard radio station is already saved in the preset list, the memory space number is displayed behi
nd the description of the frequency range (
FM
or AM
).
Calling up a station via the station keys– Briefly press on one of the six station keys to displayed in the main menu
RADIO
until a signal tone sounds.
Select stations from the preset list– In the pop-up window, select the station
keys to be displayed in the main menu
RADIO
.
– Press the display of the desired station in the preset list.RDS functionRDS (“
Radio
Data
System”) serves to transmit progra
m identification and additional
services therefore also enabling automatic tracking of stations. In the event of sufficiently satisfactory reception, the suitable RDS radio stations will display the station name instead of the station frequency. If a radio station sends additional informat
ion via the RDS function while a station is
being stored, it can occur that the name of
the radio station is later displayed incor-
rectly in the preset list.
Change station name You can manually adap
t the station name.
Choose the stored radio station and wait until the correct name is displayed on the touch-screen. Continue to press on the disp
lay of the station name between the arrow
keys until “
Station name stored
” is displayed.
Traffic programme function TPSwitching traffic programme TP (TMC Program) on or off– Press the range selector key to call up the
RADIO
main menu.
– Press the function key . – Briefly press on in the opening pop-up
window to switch the traffic programme
function on or off.
The display “
TP” in combination with a station name (e.g. in the station or preset list),
indicates a traffic programme station. Irrespective of which radio station is heard,
an additional receiver part in the unit
ensures that a traffic programme station can al
ways be received as
long as the traffic
programme function is switched on. The functionality of the tr
affic programme function “
TP” is displayed at the top right on
the touch-screen. If no traffic programme station can be rece
ived because, for example, radio reception
is interrupted in general, “
No TP
” will be displayed instead of “
TP”. Remember that car
parks, tunnels, high building
s or mountains can interrupt
the radio signal up to the
total loss of reception. Incoming traffic announcement If you wish to interrupt the transmission
of the traffic announcement, press on the
function key in the pop-up window
Traffic announcement
. The traffic
programme function remains available and
a following traffic announcement is made
again while the audio mode is in oper
ation. Pressing the function key
will switch off the traffic programme function permanently.
memory
1 ...
6 ...
RADIO
Extras
TP
Cancel
TP deactivated
s32k.a.book Page 17 Friday, September 18, 2009 1:54 PM

Range selector key TRAFFIC (TMC)
19
Range selector key TRAFFIC (TMC)Displaying traffic reports TRAFFIC (TMC)TMC traffic reports are used
during route guidance, depend
ing on the set-up for the
automatic optimization of the route,
to report possible traffic problems.
– Press on the range selector key to display the current traffic reports in a list.– Press on the display of a traffic repo
rt to show it in a detailed display.
– You can browse through all the traffic information received in the detailed display,
also in sequence by using the arrow keys.
From which TMC station the reports are to
be announced can be determined in the
Setup Radio
.
During route guidance all set-up dependin
g TMC traffic reports are displayed in the
surrounding area of the location or only th
ose specified on the calculated route list.
Traffic problems are illustrated in the de
tailed display and in the map by a corre-
sponding symbol. The direction, in which a tr
affic problem is found in the map will be
displayed by an arrow in the symbol. In the event of a traffic problem an alternat
ive route can also be
calculated manually.
Note
•
The unit has a continuous background of
TMC traffic reports providing a TMC
station at the current location can be receiv
ed. The station you are listening to does not
have to be a TMC station.•
TMC traffic reports can only be evaluated
and displayed by the
unit if the naviga-
tion data for the currently driven area is stored in the unit memory or can be called up via an inserted navigation DVD.•
The quality of the dynamic route guidan
ce depends on the transmitted traffic
announcements. The radio stations broadcasti
ng this information are responsible for
the content.•
TMC traffic reports are necessar
y for the dynamic navigation.
•
There may not be any advantage in avoiding the traffic jam if, as a result of the TMC
traffic reports, the diversio
n is also heavily congested.
TMC
s32k.a.book Page 19 Friday, September 18, 2009 1:54 PM