lock SMART FORTWO 2016 User Guide

Dashboard
FunctionPage
0043Dashboard instruments110
0044Instrument cluster23
0087Horn
0085Windshield wipers combi-
nation switch74
0083Switches the automatic
locking feature on/off55
Switches the hazard warn-
ing lamps on/off69
0084Overhead control panel27
006Bsmart Audio-System/smart
Media-System (see the sep-
arate operating instruc-
tions)
FunctionPage
006CClimate control system
control panel79
006DIgnition lock87
006EAdjusts the steering wheel65
006FControl panel for:
Turning the forward colli-
sion warning on/off48
Turning the parking aid on/
off107
0070Lights combination switch67
0071Shift paddles96
22Dashboard
>> At a glance.

(Ypage 34). There you can also find infor-
mation on the correct seat position.
Seat belts
Introduction
Seat belts are the most effective means of
restricting the movement of vehicle occu-
pants in the event of an accident or the vehi-
cle rolling over. This reduces the risk of
vehicle occupants coming into contact with
parts of the vehicle interior or being ejected
from the vehicle. Furthermore, the seat belt
helps to keep the vehicle occupant in the best
position in relation to the air bag.
The seat belt system comprises:
RSeat belts
REmergency Tensioning Devices and seat
belt force limiters
If the seat belt is pulled by the seat belt
guide quickly or with a jerky movement, the
belt retractor locks. The belt strap cannot be extracted any further.
The Emergency Tensioning Device tightens
the seat belt in an accident, pulling the belt
close against the body. However it does not
pull the vehicle occupant back in the direc-
tion of the backrest.
The Emergency Tensioning Device does not
correct an incorrect seat position or the
routing of an incorrectly fastened seat belt.
When triggered, a seat belt force limiter
helps to reduce the force exerted by the seat
belt on the vehicle occupant.
The seat belt force limiters are synchronized
with the front air bags which absorb part of
the deceleration force. This can reduce the
force exerted on the vehicle occupants during
an accident.
!If the front-passenger seat is unoccu-
pied, do not insert the belt tongue into the
buckle of the front-passenger seat. This
may otherwise lead to the triggering of the
Emergency Tensioning Device in the event
of an accident, which will then need to be
replaced.
Important safety notes
The use of seat belts and child restraint sys-
tems is required by law in:
Rall 50 states
Rthe U.S. territories
Rthe District of Columbia
Rall Canadian provinces
Even where this is not required by law, all
vehicle occupants should correctly fasten
their seat belts before starting the journey.
GWARNING
If the seat belt is incorrectly fastened, it
cannot protect as intended. Furthermore,
an incorrectly fastened seat belt can cause
additional injury, for example, in an acci-
dent, during braking or when abruptly
changing direction. This poses an
increased risk of injury or even fatal
injury.
Make sure that all vehicle occupants are
seated properly with a correctly fastened
seat belt.
GWARNING
The seat belt does not offer the intended
level of protection if you have not moved
the backrest to an almost vertical position.
When braking or in the event of an accident,
you could slide underneath the seat belt and
sustain abdomen or neck injuries, for
example. This poses an increased risk of
injury or even fatal injury.
Adjust the seat properly before beginning
your journey. Always ensure that the back-
rest is in an almost vertical position and
that the shoulder section of your seat belt
is routed across the center of your shoul-
der.
GWARNING
Persons under 5 ft (1.50 m)in height cannot
fasten the seat belt correctly without an
additional suitable restraint system. If
the seat belt is incorrectly fastened, it
cannot protect as intended. Furthermore,
an incorrectly fastened seat belt can cause
Occupant safety31
>> Safety.
Z

facing child restraint system must lie as flat
as possible against the backrest of the front-
passenger seat.
The child restraint system must not touch the
roof. Adjust the backrest angle accordingly.
Only then can OCS be guaranteed to function
correctly. Always observe the child restraint
system manufacturer's installation instruc-
tions.
How the occupant classification system
(OCS) operates
0043PASSENGER AIR BAG OFF indicator lamp
0044PASSENGER AIR BAG ON indicator lamp
The indicator lamps indicate whether the
front-passenger front air bag is activated or
deactivated.
XTurn the key to position 1or 2in the igni-
tion lock.
The system carries out a self-diagnosis
test.
The PASSENGER AIR BAG OFF and PASSENGER
AIR BAG ON indicator lamps must light up
simultaneously for about six seconds.
The indicator lamps then display the status of
the front-passenger front air bag:
RPASSENGER AIRBAG ON lights up: the front-
passenger front airbag is enabled. If, in
the case of an accident, all deployment cri-
teria are met, the front-passenger front
air bag is deployed.
RPASSENGER AIRBAG OFF lights up: the front-
passenger front airbag is disabled. It will then not be deployed in the event of an
accident.
Always observe the PASSENGER AIR BAG ON and
PASSENGER AIR BAG OFF indicator lamps when
the front-passenger seat is occupied. Make
sure that the status of the front-passenger front air bag is correct before and during a
journey.
GWARNING
If the PASSENGER AIR BAG OFF indicator
lamp is lit, the front-passenger front air
bag is disabled. It will not be deployed in
the event of an accident and cannot perform
its intended protective function. A person
in the front-passenger seat could then, for
example, come into contact with the vehi-
cle's interior, especially if the person is
sitting too close to the dashboard. This
poses an increased risk of injury or even
fatal injury.
When the front-passenger seat is occupied, always ensure that:
Rthe classification of the person in the
front-passenger seat is correct and the
front-passenger front air bag is enabledor disabled in accordance with the per-
son in the front-passenger seat
Rthe front-passenger seat has been movedback as far back as possible.
Rthe person is seated correctly.
Make sure, both before and during the jour-
ney, that the status of the front-passenger
front air bag is correct.
GWARNING
If you secure a child in a rearward-facing
child restraint system on the front-
passenger seat and the PASSENGER AIR BAG
ON indicator lamp is lit up, the front-
passenger front air bag may deploy in an
accident. The child could be struck by the
air bag. This poses an increased risk of
injury or even fatal injury.
Make sure that the front-passenger front
air bag has been disabled. The PASSENGER
AIR BAG OFF indicator lamp must be lit.
If the PASSENGER AIR BAG OFF indicator lamp
remains off and/or the PASSENGER AIR BAG ON
indicator lamp is lit, do not fit a rearward-
facing child restraint system to the front-
passenger seat. For more information, see
Occupant safety37
>> Safety.
Z

Rthe deformation characteristics of the
vehicle
Rthe characteristics of the object with
which the vehicle has collided
Factors which can only be seen and measured
after a collision has occurred do not play a
decisive role in the deployment of an air bag.
Nor do they provide an indication of air bag
deployment.
The vehicle can be deformed considerably,
without an air bag being deployed. This is the
case if only parts which are relatively easily deformed are affected and the rate of decel-
eration is not high. Conversely, air bags may
be deployed even though the vehicle suffers
only minor deformation. This is the case if,
for example, very rigid vehicle parts such as longitudinal body members are hit, and suf-
ficient deceleration occurs as a result.
If the control unit of the restraint system
detects a side impact or a vehicle rollover,
the relevant components of the restraint sys-
tem are activated separately depending on
the anticipated type of accident.
RThorax/pelvis air bag on the side of
impact, independently of the Emergency
Tensioning Device and the use of the seat
belt
The thorax/pelvis air bag on the front-
passenger side deploys under the following
conditions:
-the OCS system detects that the front-
passenger seat is occupied or
-the belt tongue is engaged in the belt
buckle of the front-passenger seat
RWindow curtain air bag on the side of
impact, independently of the use of the seat
belt and independently of whether the
front-passenger seat is occupied
RWindow curtain air bags on the driver's andfront-passenger side in certain situations
when the vehicle rolls over, if the system
determines that deployment can offer
additional protection to that provided by
the seat belt
REmergency Tensioning Devices, if the sys-
tem determines that deployment can offer
additional protection in this situation
iNot all air bags are deployed in an acci-
dent. The differ ent air bag systems work
independently of each other. How the air bag system works is determined
by the severity of the accident detected,
especially the vehicle deceleration or
acceleration and the apparent type of acci-
dent:
RFrontal collision
RSide impact
RRollover
Children in the vehicle
Important safety notes
If a child younger than 12 years and under 5 ft
(1.50 m) in height is traveling in the vehicle:
Ralways secure the child in a child restraint
system suitable for Mercedes-Benz vehi-
cles. The child restraint system must be
appropriate to the age, weight and size of
the child
Rbe sure to observe the instructions and
safety notes in this section in addition to
the child restraint system manufacturer's
installation instructions
Rbe sure to observe the instructions and
safety notes in "Occupant classification
system (OCS)" (
Ypage 36)
GWARNING
If you leave children unsupervised in the
vehicle, they could set it in motion by, for example:
Rrelease the parking brake.
Rshift the automatic transmission out of
park position Por shift manual trans-
mission into neutral.
Rstart the engine.
In addition, they may operate vehicle
equipment and become trapped. There is a
risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle.
Never leave children unsupervised in the
vehicle.
GWARNING
If persons, particularly children are sub-
jected to prolonged exposure to extreme
42Children in the vehicle
>> Safety.

Pets in the vehicle
GWARNING
If you leave animals unattended or unse-
cured in the vehicle, they could press but-
tons or switches, for example.
As a result, they could:
Ractivate vehicle equipment and become
trapped, for example
Ractivate or deactivate systems, thereby
endangering other road users
Unsecured animals could also be flung
around the vehicle in the event of an acci- dent or sudden steering or braking, thereby
injuring vehicle occupants. There is a risk
of an accident and injury.
Never leave animals unattended in the
vehicle. Always secure animals properly
during the journey, e.g. use a suitable ani-
mal transport box.
Protection against theft
Immobilizer
The immobilizer prevents your vehicle from
being started without the correct Smart Key.
XTo activate: remove the Smart Key from the
ignition lock.
XTo deactivate: switch on the ignition.
When leaving the vehicle, always take the
Smart Key with you and lock the vehicle. The
engine can be started by anyone with a valid
Smart Key that is left inside the vehicle.
iThe immobilizer is always deactivated
when you start the engine.
In the event that the engine cannot be star-
ted when the starter battery is fully
charged, the immobilizer may be faulty.
Contact an authorized Mercedes-Benz Cen-
ter or call 1-800-367-6372 (in USA) or
1-800-387-0100 (in Canada).
Anti-theft alarm system
Switching on
XMake sure that:
Rthe side windows are closed.
Rno objects, such as mascots, are hanging
from the rear-view mirror or grab han-
dles.
This will prevent false alarms.
XMake sure that:
Rthe doors are closed.
Rthe tailgate is closed
Rthe service cover is closed.
XPress the 0037button on the key.
The alarm system is primed after approx-
imately 30 seconds.
iIf the service cover is open or is not
properly closed, the vehicle will be
locked. The anti-theft alarm system is
primed. To remind you that the service
cover is not secured, a warning tone sounds
for 30 seconds. Ensure that the service
cover is properly closed. Only then is the
anti-theft alarm system correctly primed
and the service cover properly secured.
Switching off
XPress the 0036button on the key.
or
XUnlock the vehicle by using the key in the
emergency lock.
and
Switch on the ignition.
Examples for triggering the alarm
A visual and audible alarm is triggered if the
alarm system is armed and you open:
Rthe vehicle by using the key in the emer-
gency lock
Ra door
Rthe tailgate
Rthe service cover
46Protection against theft
>> Safety.

Switching off the alarm
XTo switch off the alarm:press the0036
button on the key.
The alarm is switched off.
or
XSwitch on the ignition.
The alarm is switched off.
The alarm is not switched off, even if you
close the open door that triggered it, for
example.
Driving safety systems
Overview of driving safety systems
In this section, you will find information
about the following driving safety systems:
RABS (Anti-lock BrakingSystem)
(Ypage 47)
RDistance warning function (Ypage 48)
Resp®(Electronic StabilityProgram)
(Ypage 49)
REBD (Electronic Brake forceDistribution)
(Ypage 50)
Important safety notes
If you fail to adapt your driving style or
become distracted, the driving safety sys-
tems can neither reduce the risk of accident
nor override the laws of physics. Driving
safety systems are merely aids designed to
assist driving. You are responsible for the
distance to the vehicle in front, for vehicle
speed and for braking in good time. Always
adapt your driving style to suit the prevail-
ing road, weather and traffic conditions and
maintain a safe distance from the vehicle in
front. Drive carefully.
The driving safety systems described only
work as effectively as possible when there is
adequate contact between the tires and the
road surface. Please pay special attention to
the notes on tires, recommended minimum
tire tread depths, etc. (
Ypage 177).
In wintry driving conditions, always use win-
ter tires (M+S tires) and if necessary, snow
chains. Only in this way will the driving
safety systems described in this section work
as effectively as possible. For safety reasons, smart recommends that you
only use snow chains that have been specially
approved for your vehicle by smart, or fine-
link snow chains that are of a corresponding
standard of quality. For more information,
please contact a qualified specialist work-
shop.
ABS (Anti-lock Braking System)
General information
ABS regulates brake pressure in such a way
that the wheels do not lock when you brake.
This allows you to continue steering the vehi-
cle when braking.
The 0025 (Canada only) or 00DF(USA only) abs
warning lamp in the instrument cluster lights up when the ignition is switched on. It goes
out when the engine is running.
Important safety notes
iObserve the "Important safety notes" sec-
tion for driving safety systems (Ypage 47).
When ABS is malfunctioning, other systems,
including driving safety systems, will also
become inoperative. Observe the information
on the ABS warning lamp (
Ypage 132) and
display messages which may be shown in the
instrument cluster (
Ypage 121).
GWARNING
If ABS is faulty, the wheels could lock when
braking. The steerability and braking
characteristics may be severely impaired.
Additionally, further driving safety sys-
tems are deactivated. There is an increased
danger of skidding and accidents.
Drive on carefully. Have ABS checked imme-
diately at a qualified specialist workshop.
abs works from a speed of about 4 mph (6 km/h),
regardless of road-surface conditions. ABS
works on slippery surfaces, even if you only
brake gently.
Driving safety systems47
>> Safety.
Z

If esp®intervenes:
XOnly depress the accelerator pedal as far as
necessary when pulling away.
XAdapt your driving style to suit the pre-
vailing road and weather conditions.
Crosswind Assist
General information
Strong crosswinds can cause your vehicle to
deviate from a straight course. The crosswind
driving assistance function integrated into
esp
®significantly reduces these effects.
esp®intervenes automatically according to
the direction and intensity of the crosswinds
affecting your vehicle.
esp
®intervenes with stabilizing braking to
assist you in keeping the vehicle in the lane.
crosswind assist is active at vehicle speeds
above 45 mph (70 km/h )when driving straight
ahead or cornering gently.
Important safety notes
crosswind assist does not work if esp®is dis-
abled because of a malfunction.
EBD (electronic brake force distribu-
tion)
General information
EBD monitors and controls the brake pressure
on the rear wheels to improve driving sta-
bility while braking.
Important safety notes
iObserve the "Important safety notes" sec-
tion (Ypage 47).
GWARNING
If EBD is malfunctioning, the rear wheels
can lock, e.g. under full braking. This
increases the risk of skidding and an acci-
dent.
You should therefore adapt your driving
style to the different handling character-
istics. Have the brake system checked at a
qualified specialist workshop. Observe information regarding indicator
and warning lamps (
Ypage 134) as well as
display messages (Ypage 120).
50Driving safety systems
>> Safety.

Useful information
i
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's Man- ual. Country-specific differences are pos-
sible. Bear in mind that your vehicle may
not feature all functions described here.
This also applies to safety-relevant sys-
tems and functions.
iRead the information on qualified spe-
cialist workshops: (Ypage 20).
SmartKey
Important safety notes
GWARNING
If children are left unsupervised in the
vehicle, they could:
Ropen the doors, thus endangering other
people or road users.
Rget out and disrupt traffic.
Roperate the vehicle's equipment.
Additionally, children could set the vehi-
cle in motion if, for example, they:
Rrelease the parking brake.
Rshift the automatic transmission out of
park position P or shift manual trans-
mission into neutral.
Rstart the engine.
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle.
Never leave children or animals unattended
in the vehicle. Always keep the SmartKey
out of reach of children.
GWARNING
If you attach heavy or large objects to the
SmartKey, the SmartKey could be uninten-
tionally turned in the ignition lock. This
could cause the engine to be switched off.
There is a risk of an accident.
Do not attach any heavy or large objects to
the SmartKey. Remove any bulky key rings
before inserting the SmartKey into the
ignition lock.
!Keep the SmartKey away from strong mag-
netic fields. Otherwise, the remote control
function could be affected.
Strong magnetic fields can occur in the
vicinity of powerful electrical installa-
tions.
Do not keep the SmartKey:
Rwith electronic devices, e.g. a mobile
phone or another SmartKey
Rwith metallic objects, e.g. coins or metal
foil
Rinside metallic objects, e.g. a metal case
SmartKey functions
00430036 Unlocks the driver's door/vehicle
00440037Locks the vehicle
0087Opens the tailgate
XTo unlock the driver's door: press the0036
button.
The 0036 button must be pressed a second
time within 20 seconds to unlock the front-
passenger's door. This function can be acti-
vated or deactivated in the smart Media-Sys-
tem (see the separate operating instruc-
tions).
If you do not open the vehicle within approx-
imately 2 minutes of unlocking:
Rthe vehicle is locked again.
Rprotection against theft is reactivated
SmartKey51
>> Opening and closing.
Z

XTo unlock and open the tailgate:press and
hold the button
on the key.
XTo lock centrally: press the0037button.
The SmartKey centrally locks/unlocks:
Rthe doors
Rthe tailgate
Rthe fuel filler flap
When unlocking, the turn signals flash once.
When locking, they flash twice.
Locking is confirmed by an audible signal.
SmartKey battery
Important safety notes
GWARNING
Batteries contain toxic and corrosive sub-
stances. If batteries are swallowed, it can
result in severe health problems. There is a
risk of fatal injury.
Keep batteries out of the reach of children. If a battery is swallowed, seek medical
attention immediately.
The SmartKey batteries contain perchlorate
material, which may require special han-
dling and regard for the environment.
National guidelines must be observed during
disposal. In California, see www.dtsc.ca.gov/
HazardousWaste/Perchlorate/index.cfm.
smart recommends that you have the batteries
changed at a qualified specialist workshop.
Replacing the battery
You require a CR 2032 3V cell battery.
XInsert a suitable tool, such as a coin, into
the opening of the key. Turn the tool until
cover 0043of the battery tray opens. When
doing so, do not hold cover 0043shut.
XRemove battery tray cover 0043.
XRemove battery0044.
XInsert the new battery with the positive
terminal facing upwards. Use a lint-free
cloth to do so.
XMake sure that the surface of the battery is
free of lint, grease and other contami-
nants.
XInsert battery tray cover 0043into the hous-
ing and press to close.
XCheck the function of all SmartKey buttons
on the vehicle.
52SmartKey
>> Opening and closing.

Problems with the SmartKey
ProblemPossible causes/consequences and0050Solutions
You cannot lock or
unlock the vehicle
using the SmartKey.The SmartKey battery is discharged or nearly discharged.
XTry again to lock/unlock the vehicle using the remote control
function of the SmartKey. Do this by pressing the 0036or0037
button in the immediate vicinity of the vehicle.
If this does not work:
XChange the key battery if necessary (Ypage 52).
XUnlock the vehicle with the key in the emergency lock
(Ypage 55) or lock the vehicle with the emergency locking
(Ypage 55).
There is interference from a powerful source of radio waves.
XTry again to lock/unlock the vehicle using the remote control
function of the SmartKey. Do this by pressing the 0036or0037
button in the immediate vicinity of the vehicle.
The SmartKey is faulty.
XUnlock the vehicle with the key in the emergency lock
(Ypage 55) or lock the vehicle with the emergency locking
(Ypage 55).
XHave the SmartKey checked at a qualified specialist workshop.
You have lost a Smart-
Key.XHave the SmartKey deactivated at a qualified specialist work-
shop.
XReport the loss immediately to the vehicle insurers.
XIf necessary, have the locks changed as well.
The engine cannot be
started using the
SmartKey.the on-board voltage is too low.
XSwitch off non-essential consumers, e.g. seat heating or inte-
rior lighting, and try to start the engine again.
If this does not work:
XCheck the starter battery and charge it if necessary
(Ypage 164).
or
XJump-start the vehicle (Ypage 168).
or
XConsult a qualified specialist workshop.
The steering lock is mechanically blocked.
XRemove the SmartKey and reinsert it into the ignition lock.
When you turn the key, turn the steering wheel in both direc-
tions.
SmartKey53
>> Opening and closing.
Z