trunk release SMART FORTWO 2016 Owners Manual
[x] Cancel search | Manufacturer: SMART, Model Year: 2016, Model line: FORTWO, Model: SMART FORTWO 2016Pages: 214, PDF Size: 4.93 MB
Page 66 of 214
Folding back
GWARNING
If the seat backrest is not engaged, it may
fold forwards, e.g. during braking or in the event of an accident.
RAs a result, a backrest which is not
engaged would press you into the seat
belt. The seat belt can no longer offer the
intended level of protection and can even
cause injuries.
RThe backrest cannot restrain objects or
loads in the trunk.
There is an increased risk of injury.
Before every journey, make sure that the
backrest is engaged as described.
Variant 1:
XTurn handwheel 0043back until the desired
seat backrest position is achieved
Variant 2:
XPull release lever 0043.
The backrest is released.
XFold the backrest backwards.
XEnsure that the seat backrest is engaged
again.
Switching the seat heating on/off
Activating/deactivating
GWARNING
Repeatedly switching on the seat heating
can cause the seat cushion and backrest
pads to become very hot. The health of per- sons with limited temperature sensitivity
or a limited ability to react to excessively
high temperatures may be affected or they
may even suffer burn-like injuries. There
is a risk of injury.
Therefore, do not switch the seat heating on
repeatedly.
XTurn the SmartKey to position 2in the igni-
tion lock (Ypage 87).
XTo switch on: press button0044.
Indicator lamp 0043in the button lights up.
XTo switch off: press button0044.
Indicator lamp 0043in the button goes out.
iIf the battery voltage is too low, the seat
heating may switch off.
The seat heating switches off automati-
cally after about 10 minutes.
64Seats
>> Seats, steering wheel and mirrors.
Page 147 of 214
XSlide handle0085to the right in the direc-
tion of the arrow.
XInsert the trunk cover into bracket 0044or0087
on the left side paneling and release the
handle.
Trunk cover 0043snaps into place.
XPull luggage net bag 0083down slightly and
secure with the Velcro fasteners.
To remove, follow the sequence in reverse.
Installing and removing the trunk cover
XTo install: grip trunk cover 0043in the mid-
dle and pull it back.
XHook trunk cover 0043into left and right rear
brackets 0084and release.
XTo remove: grip trunk cover 0043in the mid-
dle, pull it back and unhook it from rear
brackets 0084.
XSlide trunk cover 0043back.
Fitting/removing the subwoofer
XTo fit: insert connector 0043.
XPlace subwoofer0044on the side trim.
XSlide subwoofer 0044to bracket 0087.
XSlide the subwoofer up in the direction of
the arrow on bracket 0087.
XThen slide the subwoofer over bracket 0087in
the direction of the arrow until the sub-
woofer slides down.
XClose quick-release fastener 0085.
XTo remove:release quick-release fas-
tener 0085.
XSlide the subwoofer up over bracket 0087and
remove.
Stowage areas145
>> Stowage and features.
Z