ignition SSANGYONG KORANDO 2013 Repair Manual

8710-01
Operating process
- IGN OFF (ignition key removed)

Tail lamp AUTO switching off
The tail lamp relay is turned ON or OFF according to the ON/OFF operation of the tail lamp switch. A. Operation 1.
When the ignition is turned OFF or the ignition key is turned to the ACC ON position (ignition key
removed) with the tail lamp switch ON.
After this, the tail lamp relay is turned OFF automatically when the driver door is opened and then
closed. (with tail lamp switch ON) B.
C. Operation 2.
When the ignition is turned ON (ignition key inserted) after the operation 2, the tail lamp relay is turned
ON. D. Operation 3.
The ignition is turned OFF or the ACC is turned ON (ignition key removed).
After the tail lamp is turned ON, the lamp relay is not turned OFF automatically when the driver door is
opened and then closed. (with tail lamp switch ON) E.
F. Operation 4.
To reset, turn the ignition ON (ignition key inserted)

8710-01
Operating process
- IGN OFF (ignition key removed)

Seat belt internal buzzer (chime) and warning lamp
The ignition is turned ON from OFF with the driver and passenger seat belts unbuckled.
The internal buzzer (chime) sounds and the warning lamp comes on for 6 seconds (T2).
(internal buzzer controlled by BCM, warning lamp controlled by instrument cluster) A.
B. Operation 1.
The ignition is turned ON from OFF with the driver and passenger seat belts unbuckled.
The internal buzzer (chime) does not sound but the warning lamp comes on for 6 seconds (T2).
(The seat belt reminder is operated when the vehicle is driven at 10 km/h (for EU), 25 km/h (for GEN)) C.
D. Operation 2.
When the fastened driver seat belt is unbuckled with IGN ON.
The internal buzzer (chime) sounds and the driver seat belt warning lamp comes on for T2 again. E.
F. Operation 3.
The ignition is turned OFF while the internal buzzer (chime) and seat belt warning lamp are activated.
The internal buzzer (chime) and seat belt warning lamp are deactivated. G.
H. Operation 4.
8. SEAT BELT CONTROL
The driver seat belt is fastened while the internal buzzer (chime) and seat belt warning lamp are
activated.
The internal buzzer (chime) does not sound but the warning lamp comes on for the time remaining. I.
J. Operation 5.
When the seat belt reminder operation conditions are met during the warning, the seat belt reminder
is operated after stopping the warning output.
For the passenger seat, however, the system detects if the passenger seat is empty or occupied
and operates the warning lamp only for the first time. After that, the only seat belt reminder detects if
the passenger seat is occupied. -
-

Seat belt reminder operation
A
BIf the seat belt is fastened after the seat belt reminder is activated, the output of the reminder is
turned OFF immediately. The reminder will be operated again whenever the seat belt is
unbuckled.
CWhen the seat belt reminder is activated initially with the seat belt unbuckled, the internal buzzer
(chime) is turned ON for 0.02 seconds and then turned OFF for 1.18 seconds (this cycle
continues for 5 minutes) and the driver seat belt warning lamp on the instrument cluster remains
on.
DWhen the seat belt reminder is activated with the seat belt unbuckled, the internal buzzer (chime)
is turned ON for 0.02 seconds and then turned OFF for 1.18 seconds (this cycle continues for 5
minutes) and the passenger seat belt warning lamp on the instrument cluster remains on, after
detecting that the passenger seat is occupied through the input value of the passenger seat
occupancy sensor.
EWhen the vehicle speed is changed while the seat belt reminder is turned on, the internal buzzer
(chime) is operated as follows:
FPriority of internal buzzer (chime) operation
(Seat belt reminder > ignition key reminder > sunroof warning > tail lamp warning > hazard
warning flasher on > turn signal indicator)GEN
The seat belt reminder is operated when the
vehicle is driven at 25 km/h or more with IGN
ON and alternator in High status (engine
running), and driver seat belt is not fastened. If
the vehicle speed is decreased to less than 25
km/h within 5 minutes after the seat belt
reminder is activated, the internal buzzer
(chime) is turned off. If the vehicle speed is
increased to 25 km/h or more, the buzzer
signal is output for 5 minutes. Only EU If the driver and passenger seat belts are not
fastened with the ignition switch ON, engine
running, vehicle speed above 10 km/h and
any passenger occupied, the seat belt
reminder is activated. In addition, even though
the vehicle speed reduces to below 10 km/h
after the reminder is activated at speed of 10
km/h or higher, it will remain activated.
Vehicle speedFunction
Remarks
Interior buzzerInstrument
cluster
25 Km/h to 49 Km/h
(10km/h~49km/h)0.02 sec. ON / 1.18 sec. OFF Remains on (Only EU)
50 Km/h to 99 Km/h 0.02 sec. ON / 0.98 sec. OFF Remains on
100 km/h or more 0.02 sec. ON / 0.78 sec. OFF Remains on

The driver door is opened with the sunroof open and IGN OFF and ACC ON (ignition key
removed).
The internal buzzer (chime) sounds for 10 seconds (T1). A.
B. Operation 1.
The driver door and sunroof is closed while the internal buzzer (chime) is activated.
The internal buzzer (chime) is deactivated.
(The internal (chime) buzzer is not activated again after the operation 1, and it is activated again when
the operation 1 is performed after the ignition is turned ON) C.
D. Operation 2.
9. SUNROOF WARNING LAMP CONTROL
The sunroof open warning (T2) overrides the tail lamp ON warning (T3). E. Operation 3.

8710-01
Operating process
- IGN OFF (ignition key removed)

Door is opened with IGN OFF.
The key hole lamp comes on.
The key hole lamp comes on for 10 seconds (T1) when the door is closed. A.
B.
C. Operation 1.
The ignition is turned ON with the key hole lamp ON.
The key hole lamp goes out. D.
E. Operation 2.
10. KEY HOLE LAMP CONTROL
The key hole lamp goes out when the REKES LOCK signal is received (in theft deterrent
mode).
When the key hole lamp and immobilizer signals are received simultaneously, the immobilizer signal
overrides the key hole lamp signal.
When the immobilizer confirmation is failed, regardless of the key hole lamp operation condition, it
flashes for 11 seconds at intervals of 0.5 sec. ON/0.5 sec. OFF.
When the ignition is turned ON in virgin status, the key hole lamp flashes for 8 seconds at intervals
of 0.5 sec. ON/0.5 sec. OFF. -
-
-
-

Front defogger (heated wire) timer control
The front defogger (heated wire) switch is turned ON.
The front defogger (heated wire) is activated for 12 minutes (T1). A.
B. Operation 1.
Turning on the front defogger (heated wire) switch again when the defogger is activated turns off the
fog lamp output. C. Operation 2.
Within 10 minutes (T2) after the output of the front defogger (heated wire) for 12 minutes (T1).
When the front defogger (heated wire) switch is turned ON, the front defogger is activated for only 6
minutes (T3).
(This operation is not available when the front defogger is turned off by turning off engine, IGN OFF, or
front defogger (heated wire) switch). D.
E. Operation 3.
If the engine is running at low speed with IGN OFF or IGN ON, the front defogger (heated wire) is
deactivated. F. Operation 4.
The front defogger is turned OFF when the ignition is turned OFF or engine is not running.
11. DEFOGGER (HEATED WIRE) TIMER CONTROL

8710-01
Rear defogger (heated wire) timer control
The rear defogger (heated wire) switch is turned ON.
The rear defogger (heated wire) is activated for 12 minutes (T1). A.
B. Operation 1.
Turning on the rear defogger (heated wire) switch again when the defogger is activated turns off the
fog lamp output. C. Operation 2.
Within 10 minutes (T2) after the output of the rear defogger (heated wire) for 12 minutes (T1).
When the rear defogger (heated wire) switch is turned ON, the front defogger is activated for only 6
minutes (T3).
(This operation is not available when the rear defogger is turned off by turning off engine, IGN OFF, or
front defogger (heated wire) switch) D.
E. Operation 3.
If the engine is running at low speed with IGN OFF or IGN ON, the rear defogger (heated wire) is
deactivated. F. Operation 4.
The rear defogger is turned OFF when the ignition is turned OFF or engine is not running.