warning SSANGYONG NEW ACTYON SPORTS 2013 User Guide

02-238710-01
▶Ignition Key Reminder WarningThe chime buzzer sounds continuously when opening the driver's door whil\
e the ignition key is in
ignition switch.
When removing the ignition key or closing the driver's door during chime\
buzzer operation, the
buzzer stops.
This function does not work when the IGN1 switch is in "ON" position.
-
-
-
(The function has priority over the "TAILLAMP ON WARNING".)
Chime Buzzer
PAS buzzer
ICM relay box
STICS

02-26
▶Tail Lamp Left On WarningThe chime buzzer sounds with the interval of 0.8 second when opening the\
driver's door while the
tail lamp is turned on and the ignition key is removed.
The c/buzzer output stops when turning off the tail lamp and closing the\
driver's door.
The system outputs "UNLOCK" signal for 5 seconds when the driver's and p\
assenger's door lock
switch is locked (while the tail lamp is turned on and the driver's doo\
r is open).
This function does not work when the IGN1 switch is in "ON" position.
-
-
-
-

02-278710-01
▶Door Ajar WarningThe warning light comes on when opening any door while the vehicle speed\
is below 10 km/h.
The warning light goes off when closing the door under step (1).
The warning light blinks when the vehicle speed is over 10 km/h while the warning light is turned
on.
The warning light blinks when a door is open while the vehicle speed is \
over 10 km/h.
The warning light goes off when closing the door under step (3).
The warning light comes on when the vehicle speed goes below 10 km/h und\
er step (3).
1.
2.
3.
4.
5.
6.
Since the luggage room tailgate does not have the door switch, the door \
ajar warning light does not
come on when it is open.

02-28
▶Seat Belt WarningThe seat belt warning light comes on and the chime buzzer sounds for 6 secon\
ds when turning
the ignition key to "ON" from "OFF".
If the seat belt is fastened before turning the ignition key to the the "ON" position, the warning light
blinks, however, the chime buzzer does not sound.
The seat belt warning light goes off and the chime buzzer stops when turning the ignition switch to
the "OFF" position during the warning operation.
The chime buzzer stops and the seat belt warning light stays on for the remainig time when
fastening the seat belt.
The seat belt warning light comes on and the chime buzzer sounds for 6 s\
econds again when
unfastening the seat belt during fastening operation while the ignition \
key is "ON" position.
1.
2.
3.
4.
The seat belt warning light blinks and the chime buzzer sounds for 6 seconds\
when turning the ignition
key to "ON" without fastening the seat belt. After fastening the seat be\
lt, the chime buzzer stops.
Seat Belt Warning LightChime Buzzer

02-298710-01
▶Parking Brake WarningThe parking brake warning light comes on for approx. 4 seconds when turning the ignition key
from the "OFF" to the "ON" position regardless of the vehicle speed and the parking brake switch
position. After this 4 seconds, the warning light comes on, goes off or blinks according to the
vehicle speed and the parking brake switch position.
The warning light comes on when the parking brake is applied and the veh\
icle speed is below 10
km/h.
The warning light goes off when releasing the parking brake under step (\
2).
The warning light blinks and the chime buzzer sounds for 2.5 seconds and stops for 1.5 seconds
when the vehicle speed is over 10 km/h for more than 2 seconds while the parking brake is
applied.
The warning light goes off and the chime buzzer stops when releasing the\
parking brake unde
r
step (4).
The warning light comes on and the chime buzzer stops when the vehicle speed goes down
below 10 km/h under step (4).
This function does not work when the ignition switch is in "OFF" positio\
n.
1.
2.
3.
4.
5.
6.
7.

02-44
2. STICS CONTROL REGARDING THEFT WARNING ALARM
1) Armed mode
The followings are definition of DOOR OPEN/CLOSE and DOOR LOCK/UNLOCK in\
respect of theft
deterrent system.
-
DOOR OPEN and DOOR CLOSE DOOR OPEN:
- Any of all door switches (including engine hood, driver's door, passenge\
r's door or
rear door) is in "OPEN" position.
DOOR CLOSE:
- All door switches (including engine hood, driver's door, passenger's doo\
r, rear
door and tailgate) are in "CLOSE" position.
The door lock/unlock operation does not affect the engine hood.
OPEN/CLOSE of the dech tailgate does not affect entering the armed mode.\
In other words, when the hood and front/rear door are closed even if the\
dech tailgate is open, the
vehicle can enter the armed mode.
-
-
DOOR LOCK & DOOR UNLOCK DOOR LOCK:
-
Indicates that driver's, passenger's and rear door and tailgate lock swi\
tches are in
LOCK positions.
DOOR UNLOCK:
- Indicates that driver's, passenger's or rear door or tailgate lock switc\
hes are in
UNLOCK positions.
Engine hood open warning lamp
The warning lamp comes on when the engine hood
is open.
Since the luggage room tailgate does not have the door switch, the door ajar warning light does not
come on when it is open.

02-458710-01
2) Description of Theft Deterrent Function
(1) Armed mode activation requirements
The "LOCK" output is "ON" when the "LOCK" signal is received from transmitter while the ignition
key is removed and all doors are closed.
The armed mode is activated when the door lock switch is locked (hazard warning flasher blink
twice).
The armed mode is still activated and the hazard warning flasher blink t\
wice when the
"LOCK" signal is received from the remote control key again in armed mod\
e.
When the "LOCK" signal is received from the remote control key while any of doors is not closed,
only the "LOCK" output can be done and then activates the armed ready mo\
de
(without theft deterrent horn and hazard warning flasher). At this moment, if the ignition key is
inserted or the door lock switch is unlocked, it cancels the armed mode and activates the normal
mode.
When the door is opened or the ignition key is not inserted into ignition switch within 30 seconds
after receiving "UNLOCK" signal from the remote control key, it outputs "LOCK" and then activates
armed mode (RELOCK operation). Also, at this moment, the system blinks hazard warning flashe
r
twice.
The armed mode will not be activated except above conditions.
Ex) The armed mode will not be activated when the door is locked by the\
ignition key.
a.
b.
c.
d.
e.

02-46
(2) Armed mode cancellation requirements(3) Warning operation requirements
(4) Warning operation
(5) Warning cancellation requirements
(6) Operation when warning is cancelled
Receiving UNLOCK signal from the remote control key or starting the engi\
ne.
a.
When opening the door in armed mode
When unlocking the door lock switch in armed mode by other than the remo\
te control key
When closing and then opening the door after completion of warning (27 \
seconds)
a.
b.
c.
The theft deterrent horn and hazard warning flasher output is "ON" for 2\
7 seconds at the interval of 1
second.
a.
Cancels warning by using any signal from the remote control key (LOCK, \
UNLOCK, PANIC) during
warning operation.
Cancels warning after 27 seconds (remaining time) while the ignition k\
ey is turned to "ON"
position.
If the ignition switch is turned to ON position when the warning is acti\
vated in armed mode, the
warning is cancelled immediately and the warning buzzer stops after 27 s\
econds (remaining time).
a.
b.
c.
The theft deterrent horn and hazard warning flasher outputs are "OFF".
a.

02-478710-01
(7) Operation when warning is cancelled
The theft deterrent horn and hazard warning flasher is activated when fi\
tting the battery in armed mode. (The
same operation as when alarm condition is met in armed mode is performed\
.)PANIC Warning
▶
The PANIC warning output is "ON" for 27 seconds using the horn and hazar\
d warning flasher,
when receiving the PANIC signal from the remote control key.
The PANIC warning output is "OFF" when pressing any button on the remote\
control key during
PANIC warning.
The followings are about the theft deterrent warnings.
1.
2.
3.
The theft deterrent warning is deactivated when receiving PANIC signal f\
rom the remote
control key during theft deterrent warning.
The theft deterrent warning output is "ON" when the theft deterrent cond\
itions are
established during PANIC warning (PANIC output is "OFF").
The PANIC warning output is "ON" when receiving the PANIC signal from th\
e remote control
key in Armed Ready / Armed / Warning Comp letion / Relock Ready mode (maintaining the
theft deterrent mode).
a.
b.
c.
This function operates only in armed mode.
4.
Removed Normal Armed Warning Remark
Normal O
RELOCK operation:
When the door is not opened
or the ignition key is not
inserted into ignition switch
for 30 seconds after
receiving "UNLOCK" signal,
outputs "LOCK" and then
activates armed mode
Armed Ready
O
Armed O
Warning O
Warning Completion O OO
RELOCK Ready O
Installed

02-48
Automatic Hazard Warning Lamp Switch (SHP: Safety Hazard Protection)
▶
When the automatic hazard warning lamp switch is pressed for approx. 0.1\
to 0.59 seconds, the
hazard warning lamp blinks 3 times at an interval of 0.35 seconds.
When the automatic hazard warning lamp switch is pressed for approx. 0.6\
seconds or longer,
the hazard warning lamp blinks 10 times at an interval of 0.35 seconds.
This function is only available when the ignition key is in the "ON" pos\
ition.
If the ignition key is turned to the "OFF" position dur ing this function is activated, this function is
immediately deactivated.
If the system receives signals for the turn signal lamp operation during\
this function is activated,
this function is immediately deactivated.
While the turn signal lamp signals are already inputted, pressing the au\
tomatic hazard warning
lamp switch does not activate the automatic hazard warning lamp function\
.
1.
2.
3.
4.
5.
6.
Automatic hazard warning lamp switch
▶
Press briefly (0.1 ~ 0.59 seconds): The hazard
warning lamp blinks three times.
Press and hold (more than 0.6 seconds): The
hazard warning lamp blinks ten times.
·
·