diagram SSANGYONG RODIUS 2007 User Guide

0-7
TRANSFER CASE
RODIUS 2006.09
3410-01
4. SECTIONAL DIAGRAM

0-14
RODIUS 2006.09
3410-01
TRANSFER CASE
7. TRANSFER CASE BLOCK DIAGRAM

0-6
RODIUS 2006.09
3170-01
MANUAL TRANSMISSION
2. CIRCUIT DIAGRAM (BACKUP LAMP)

0-14
RODIUS 2006.09
3240-01
TORQUE ON DEMAND
4. CIRCUIT DIAGRAM

0-5
ESP SYSTEM
RODIUS 2006.09
4892-01
2. INPUT AND OUTPUT DIAGRAM

0-13
ESP SYSTEM
RODIUS 2006.09
4892-01
6) Hydraulic Circuit Diagram

0-19
ESP SYSTEM
RODIUS 2006.09
4892-01
▶Hydraulic Diagram of HBA
The above figure shows one front and one rear wheel and the same hydraulic circuit forms as
in the ESP operation.
When HECU recognizes that it is an emergency and it is required for hard braking, depending
on the pressure value of the brake pressure sensor and pressure changes caused by the
pressure sensor timing, it operates the pump immediately to apply the brake pressure at the
wheels.
Then, the pressure in the pump increases until just before the corresponding wheel gets locked.
The motor still keeps rotating and the outlet valve and the separation valve are will stay closed.
When the wheel starts to lock, the HBA function cancels and switches to ABS operation.

0-20
RODIUS 2006.09
4892-01
ESP SYSTEM
4. ELECTRICAL CIRCUIT DIAGRAM
<0d96007e008f008c008c00930047007a0097008c008c008b0047007a008c0095009a0096009900530047007a009b009600970047007300880094009700530047006b00900088008e00950096009a0090009a00530047007e008800990095009c0095008e00
4700730088009400970047004f00680069007a0056006c007a>P)

0-14
RODIUS 2006.09
4892-01
ABS SYSTEM
2. INPUT AND OUTPUT DIAGRAM

0-18
RODIUS 2006.09
4892-01
ABS SYSTEM
2) HYDRAULIC CIRCUIT DIAGRAM
(1) Hydraulic Circuit of ABS
The vehicle equipped only with the ABS controls the wheel’s braking force using three 3-
channel 4-sensor method. The front wheels that are the primary circuit of the brake system is
composed of two wheel speed sensors and two channel valves system with two inlet valves
and two outlet valves. The rear wheels that are the secondary circuit of the brake system is
composed of two wheel speed sensors, one inlet valve and one outlet valve. This system is
similar to the one from the previous model.