battery SUBARU CROSSTREK 2017 1.G Multimedia System Manual

BASIC FUNCTION
27
1
QUICK GUIDE
No. Indicators Conditions
The
amount
of battery
charge leftLow
Full
The amount displayed does not always
correspond with the amount displayed on the
Bluetooth device.
The amount of battery charge left may not
be displayed depending on the type of the
Bluetooth device connected.

BASIC OPERATION
54
BASIC OPERATION
SOME BASICS
This section describes some of the basic features of the
audio/visual system. Some information may not pertain to
your system.
Your audio/visual system works when the ignition switch is
turned to the “ACC” or “ON” position.
CAUTION
OTo prevent the battery from being discharged, do not leave
the audio/visual system on longer than necessary when the
engine is not running.
TURNING THE SYSTEM ON AND OFF
“POWER/VOLUME” knob: Press to turn the audio/visual
system on and off. The system turns on in the last mode
used. Turn this knob to adjust the volume. Note that the
voice guidance volume can be adjusted during guidance.
“AUDIO/TUNE” knob: Press to display screen buttons for
the audio/visual system.

”A function that enables automatic return to the split
screen from the audio/visual screen can be selected.

:3

MEDIA OPERATION
86
No. Function
Select to set repeat playback.
The random playback method changes as shown below
each time the random button is selected.
: The tracks contained within the list
currently playing will be played in
random order.
: The albums contained within the list
currently playing will be played in
random order.
: Random playback is disabled.

Select to display the play mode selection screen.
‡“Artists (Artists)”/“Albums (Albums)”/“Songs
(Songs)”/“Playlists (Playlists)”/“Genres
(Genres)”/“Composers (Composers)”/“Audiobooks
(Audiobooks)”/“Podcasts (Podcasts)”/“Videos (Videos)”
are on the play mode selection screen.
To return to the top screen, select
Now Playing (Now
Playing) on the list screen.
WARNING
ODo not operate the player’s controls or connect the iPod while
driving.
CAUTION
ODo not leave your portable player in the car. In particular, high
temperatures inside the vehicle may damage the portable
player.
ODo not push down on or apply unnecessary pressure to the
portable player while it is connected as this may damage the
portable player or its terminal.
ODo not insert foreign objects into the port as this may damage
the portable player or its terminal.
NOTE
OWhen an iPod is connected using a genuine iPod cable, the iPod
starts charging its battery.
OIf playing iPod music, perform operation at the system. Certain
functions may not be available if played directly from the
iPod. Furthermore, depending on the connected iPod, certain
functions may not be available.
ODepending on the iPod and the songs in the iPod, iPod cover
art may be displayed. This function can be changed to on/
RII 
:3  ,W PD\ WDNH WLPH WR GLVSOD\ L3RG FRYHU DUW DQG
the iPod may not be operated while the cover art display is in
process.
OWhen an iPod is connected and the audio source is changed to
iPod mode, the iPod will resume playing from the same point it
was last used.
OTracks selected by operating a connected iPod may not be
recognized or displayed properly.

BEFORE USING THE APPLICATION
150
BEFORE USING THE APPLICATION
BEFORE USING THE APPLICATION
Precautions to be aware of when using the application are
shown below.
In this chapter, iPhone or Android devices will be referred to
as a smartphone.
WARNING
ODo not connect or operate the smartphone while driving.
OBe sure to park the vehicle in a safe location before
connecting or operating the smartphone.
CAUTION
ODo not leave your smartphone in the car. In particular, high
temperatures inside the vehicle may damage the smartphone.
ODo not push down on or apply unnecessary pressure to the
smartphone while it is connected as this may damage the
smartphone or its terminal.
OIf connecting your smartphone via USB, do not insert foreign
objects into the USB port as this may damage the smartphone
or its terminal.
NOTE
ODepending on the application, certain functions are not available
while driving for reasons of safety.
OIn order to maximize signal reception, performance and precision
of the smartphone, please ensure the smartphone is placed as
close to the system as possible, while ensuring it is stowed and
secure while driving.
OWhen connecting your smartphone via USB, use the original
cables provided with your smartphone or equivalent third-party
FHUWL¿HG FDEOHV
OWhen the ignition switch is in the “ACC” or “ON” position, the
battery of the connected smartphone is charged.
OIf connecting your smartphone via USB, smartphone may not
be recognized when the ignition switch is in the “ACC” or “ON”
position. In this case, remove the smartphone and reconnect it.
OThe accuracy of the displayed information or the signal reception
performance depends on the smartphone or the connected
device, and its wireless connection.
OFor operating the smartphone, see the instruction manual that
comes with it.
O)ROORZ WKH VSHFL

WHAT TO DO IF
288 XIn other situations
Symptom Likely cause SolutionPage
Cellular
phoneThis
system
The Bluetooth connection status is
displayed at the top of the screen
each time the ignition switch is turned
to the “ACC” or “ON” position.&RQQHFWLRQFRQ¿UPDWLRQGLVSOD\RQ
this system is set to on.To turn off the display, set connection
FRQ¿UPDWLRQGLVSOD\RQWKLVV\VWHP
to off.- 188
Even though all conceivable
measures have been taken, the
symptom status does not change.The cellular phone is not close
enough to this system.Bring the cellular phone closer to this
system.--
The cellular phone is the most likely
cause of the symptom.Turn the cellular phone off, remove
and reinstall the battery pack, and
then restart the cellular phone.*-
Enable the cellular phone’s Bluetooth
connection.*-
Stop the cellular phone’s security
software and close all applications.*-
Before using an application installed
on the cellular phone, carefully check
its source and how its operation
might affect this system.*-
*: For details, refer to the owner’s manual that came with the cellular phone.