dimensions SUBARU FORESTER 1999 Service User Guide

IFore-aft adjustment
1) Door glass alignment must be adjusted so that
glass-to-center pillar fit is equal at all points.
Always use dimensions as a guide during adjust-
ment.
NOTE:
If dimensions are smaller than those indicated,
glass will be caught in weatherstrip and may not
raise to the fully closed position.
S5M0384A
2) After making fore-aft adjustment, raise and
lower glass to ensure it is free from any binding.
IFit adjustment
Increasing contact pressure causes rear door
glass to be caught in upper center pillar and lower
weatherstrip; this will cause premature weather-
strip wear. For this reason, always use dimensions
indicated below as a guide during glass fit adjust-
ment.
S5M0385A
24
5-2[W2B5]SERVICE PROCEDURE
2. Door