ECU SUBARU FORESTER 2004 Service Owners Manual

SL-36
SECURITY AND LOCK
Key Lock Cylinder
18.Key Lock Cylinder
A: REPLACEMENT
1. FRONT DOOR
 Without double lock:
1) Remove the door trim. Front Door Trim.>
2) Pull back the sealing cover. MOVAL, Front Sealing Cover.>
3) Close the front door glass completely.
4) Remove the rod clamp (A). Remove the lock
plate (B). Replace the key cylinder.
NOTE:
Be sure to replace the lock plate (B) with a new
one.
 With double lock:
1) Remove the door trim. Front Door Trim.>
2) Remove the sealing cover. MOVAL, Front Sealing Cover.>
3) Close the front door glass completely.
4) Remove the key cylinder retainer cover, and
then remove the rod clamp (A).
CAUTION:
Be sure to replace the key cylinder retainer cov-
er with a new one when removing.
5) Remove the bolt (B) and key cylinder retainer to
replace the key cylinder.
SL-00026
(A) (B)
SL-00060
(A) (B)

SL-37
SECURITY AND LOCK
Immobilizer Control Module
19.Immobilizer Control Module
A: REMOVAL
NOTE:
The following positions for removal and installation
are for LHD models. The positions for RHD models
are symmetrically opposite.
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. to EI-40, REMOVAL, Instrument Panel Assembly.>
3) Disconnect the connector from immobilizer con-
trol module.
4) Remove the immobilizer control module.
B: INSTALLATION
Install in the reverse order of removal.
SL-00061

SL-38
SECURITY AND LOCK
Immobilizer Antenna
20.Immobilizer Antenna
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. to EI-40, REMOVAL, Instrument Panel Assembly.>
3) Remove the screws, separate upper column cover
and lower column cover.
4) Disconnect the immobilizer antenna connector (A)
from immobilizer control module.
5) Remove the screw, and detach the immobilizer
antenna (B).
B: INSTALLATION
Install in the reverse order of removal.
SL-00062
(B)
SL-00063
(A)

SL-39
SECURITY AND LOCK
Keyless Entry Control Module
21.Keyless Entry Control Mod-
ule
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the glove box. AL, Glove Box.>
3) Remove the nut, and then remove the keyless
entry control module while disconnecting connec-
tor.
B: INSTALLATION
Install in the reverse order of removal.
SL-00047

SL-40
SECURITY AND LOCK
Double Lock Module
22.Double Lock Module
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. to EI-40, REMOVAL, Instrument Panel Assembly.>
3) Remove the nut, then remove the double lock
module while disconnecting the connector.
B: INSTALLATION
Install in the reverse order of removal.
SL-00064

SL-41
SECURITY AND LOCK
Keyless Transmitter
23.Keyless Transmitter
A: REMOVAL
1. TRANSMITTER BATTERY
Remove the battery from transmitter.
NOTE:
To prevent static electricity damage to transmitter
printed circuit board, touch the steel area of building
with hand to discharge the static electricity carried
on body or clothes before disassembling transmitter.
B: INSTALLATION
1. TRANSMITTER BATTERY
Install in the reverse order of removal.
C: INSPECTION
1. TRANSMITTER BATTERY
Measure the voltage between battery (+) terminal
and (–) terminal.
NOTE:
 Battery discharge occurs during measurement.
Complete the measurement within 5 seconds.
 During battery voltage measurement, voltage
falls more than 1.8 volts in 3 seconds period.If NG, replace the battery. (Use CR1620 or equiva-
lent.)
D: REPLACEMENT
1. TRANSMITTER REGISTRATION
NOTE:
 A maximum of three transmitters can be regis-
tered for each individual vehicle.
 When replacing the transmitter (key), registration
to immobilizer system is also necessary.
1) Remove the side sill cover at driver’s side, then
connect the registration connectors at front pillar
lower section.
2) Unlock the door lock.
3) Press any button of the transmitter twice while
pressing driver’s door lock switch to unlock side to
be registered.
4) The door lock will automatically lock and unlock
in sequence. This indicates the completion of trans-
mitter registration for first transmitter.
5) If the registration of second and third transmitter
is now to be carried out, repeat the procedure 3)
and 4).
6) Disconnect the registration connectors after the
completion of all registration operations. After con-
firming the operation of door lock using newly reg-
istered transmitter(s), reinstall the side sill cover at
driver’s side.
(A) Resistance 300 Ω
Tester connection
Standard
(+) (–)
Battery (+) termi-
nalBattery (–) termi-
nal2.5 — 3.0 V
SL-00065
SL-00066
(A)

SL-42
SECURITY AND LOCK
Keyless Transmitter

FUJI HEAVY INDUSTRIES LTD. G8080GE7
2004 FORESTER SERVICE MANUAL QUICK REFERENCE INDEX
BODY SECTION
This service manual has been prepared
to provide SUBARU service personnel
with the necessary information and data
for the correct maintenance and repair
of SUBARU vehicles.
This manual includes the procedures
for maintenance, disassembling, reas-
sembling, inspection and adjustment of
components and diagnostics for guid-
ance of experienced mechanics.
Please peruse and utilize this manual
fully to ensure complete repair work for
satisfying our customers by keeping
their vehicle in optimum condition.
When replacement of parts during
repair work is needed, be sure to use
SUBARU genuine parts.
All information, illustration and specifi-
cations contained in this manual are
based on the latest product information
available at the time of publication
approval.HVAC SYSTEM
(HEATER, VENTILATOR AND A/C)AC
HVAC SYSTEM (AUTO A/C)
(DIAGNOSTIC)AC
AIRBAG SYSTEM AB
AIRBAG SYSTEM (DIAGNOSTIC) AB
SEAT BELT SYSTEM SB
LIGHTING SYSTEM LI
WIPER AND WASHER SYSTEM WW
ENTERTAINMENT ET
COMMUNICATION SYSTEM COM
GLASS/WINDOW/MIRROR GW
BODY STRUCTURE BS
INSTRUMENTATION/DRIVER INFO IDI
SEAT SE
SECURITY AND LOCK SL
SUNROOF/T-TOP/CONVERTIBLE TOP
(SUNROOF)SR
EXTERIOR/INTERIOR TRIM EI
EXTERIOR BODY PANEL EB

SR-3
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
General Description
B: CAUTION
 Before disassembling or reassembling parts, always
disconnect battery ground cable. When replacing ra-
dio, control module and other parts provided with
memory functions, record memory contents before dis-
connecting the battery ground cable. Otherwise, the
memory will be erased.
 Reassemble in reverse order of disassembly, un-
less otherwise indicated.
 Adjust parts to the given specifications.
 Connect connectors and hoses securely during
reassembly.
 After reassembly, make sure functional parts op-
erate smoothly.
C: PREPARATION TOOL
1. GENERAL TOOL
TOOL NAME REMARKS
Circuit tester Used for measuring resistance and
voltage.

SR-6
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
Sunroof Assembly
4. Sunroof Assembly
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove roof trim. Roof Trim.>
3) Remove sunroof lid. Sunroof Lid.>
4) Disconnect the four drain tubes (A) from sunroof
frame.
5) Disconnect sunroof harness connector.
6) Remove the bolts, and then remove the frame
bracket.
7) Remove bolts and nuts and then detach sunroof
frame.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful not to snag harness.
NOTE:
 Make sure to connect harness connector.
 When installing drain tube, insert it securely into
drain pipe.
Length A:
15 mm (0.59 in) or more
C: DISASSEMBLY
1) Remove sunroof frame.
2) Cut the pawl (A) of front sunshade RH.
3) Remove the front slider RH.
4) Pull out the sunshade (B) from sunroof frame.
D: ASSEMBLY
Assemble in the reverse order of disassembly.
SR-00014
SR-00015(A)(A)
SR-00005
A
SR-00006
(A)
SR-00007