SUBARU IMPREZA 2011 4.G Navigation Manual

Navigation 71
Stored Locations
3Set the memory point using the preferred method avail-
able on the displayed screen.
NOTE
Up to 100 memory points can be stored. Once that number has been reached,
you must delete memory points that you no longer require (See Page 74) before
you can store new memory points. The nu mber of memory points you can store
is indicated on the screen.
■ Reviewing and modifying memory points
Using this function, you can review the stored memory points in the
form of a list on the screen and modify names, icons, telephone num-
bers, and other memory point data.
1Press the button, then select (stored loca-
tions), and then select (memory points).
2Select (list).
Impreza_B1962BE-A.book Page 71 Wednesday, May 7, 2008 9:01 PM

72 Navigation
Stored Locations
3Select the memory point to be modified.
You can change the sequence in which memory points are listed by
selecting (Attribute), (icon), (na
me), or (date)
.
4Select the category key corresponding to the memory
point to be modified.
(icon ): Selecting this key allows you to choose a dis-
play icon. (Page 1) and (Page 2) of
the CHANGE ICON screen contain standard icons, whereas the
"With Sound" (with sound) page contains icons that are accompa-
nied by response sounds. Select (with sound) to
listen to these sounds.
Impreza_B1962BE-A.book Page 72 Wednesday, May 7, 2008 9:01 PM

Navigation 73
Stored Locations
NOTE
The "With direction" ( / ) keys in the "With Sound" page are
used to activate response sounds only when you come near the mem-
ory point from the specified direction. Select or and set
the direction using or . Selecting allows you to listen to
respective sounds.(category): Use this key to change the storage cate-
gory. After selecting this key, select either key of HOME or Preset
Destinations 1 to 5.
For memory points to which the ca tegory has been set, it is possi-
ble to set them quickly as a destinat ion. It is convenient to set in
advance the category to your home or a spot to which you go fre-
quently. When setting it as a destination, select the relevant key
on the DESTINATION ENTRY screen. See Page 29.
(name): Select this key to change the name of a mem-
ory point. When the change has been completed,
select (OK). Then select (on) if the name is to be
displayed on the map, or (off ) if it is not to be displayed. (
position ): Select this key to review the memory
points and modify a memory point on the map screen. After
checking or modify ing it, select (OK).
( Tel): Select this key to modify a telephone number.
When the modification has been completed, select (OK).
Impreza_B1962BE-A.book Page 73 Wednesday, May 7, 2008 9:01 PM

74 Navigation
Stored Locations
■Deleting memory points
You can delete stored memory points by using this function.
1Press the button, then select (stored loca-
tions), and then select (memory points).
2Select the category of the memory point to be deleted.
3Select (delete).
4Select the memory point to be deleted.
5Confirmation message will be displayed. Select
(yes).
Select (no) to cancel the deletion.
■Deleting all memory points
Using this function, you can delete all memory points.
1Press the button, then select (stored loca-
tions), and then select (memory points).
2Select the category of the me mory points to be deleted.
3Select (delete all).
Impreza_B1962BE-A.book Page 74 Wednesday, May 7, 2008 9:01 PM

Navigation 75
Stored Locations
4Confirmation message will be displayed. Select
(yes).
Select (no) to cancel the deletion.
Avoid area
■Storing avoid areas
If you use this function to store in to the system's memory the areas you
want to avoid, the system will avoi d the areas when calculating routes.
1Press the button, then select (stored loca-
tions), and then select (avoid area).
2Select (add).
3Set an avoid area using your preferred method.
A map including the specified avoid area will appear.
The method of setting avoid areas is identical to that of setting
destinations.
Impreza_B1962BE-A.book Page 75 Wednesday, May 7, 2008 9:01 PM

76 Navigation
Stored Locations
4Select (reduce) or (enlarge).
(reduce): Reduces the size of the avoid area.(enlarge): Increases the size of the avoid area.
5Select (OK).
NOTE • Reduce the scale of the map to specify a larger area.
• Avoid areas can be set only when the sc ale of the map is 0.6 mile (1 km) or
less.
■ Reviewing and modifying avoid areas
Using this function, you can review the stored avoid areas in the form of
a list and modify them if necessary.
1Press the button, then select (stored loca-
tions), and then select (avoid area).
2Select (list).
3Select the avoid area to be modified.
4Select the key corresponding to the item to be modified.
For details regarding the function of each key, refer to "Reviewing
and modifying memory points" on Page 71.
NOTE
The methods for deleting individual and all avoid areas are the same as those
described on Page 74 for memory points.
Impreza_B1962BE-A.book Page 76 Wednesday, May 7, 2008 9:01 PM

Navigation 77
Stored Locations
Previous destination (deleting stored locations)
Use this function to delete previously set destinations.
1Press the button, then select (stored loca-
tions), and then select (previous destinations).
2Select (delete).
If (all delete) is selected, all previously set
destinations will be deleted.
3Select the destination to be deleted.
: Use this key to display up to five previous destinations.
: Use this key to display the previous destination.
: Use this key to display the next destination. : Use this key to display up to five of the next destinations.
(name ): Use this key to search through the list by name
(alphabetical search).
( date ): Use this key to search through the list by date.
Impreza_B1962BE-A.book Page 77 Wednesday, May 7, 2008 9:01 PM

78 Navigation
Stored Locations
4Confirmation message will be displayed. Select
(yes).
Select (no) to cancel the deletion.
Impreza_B1962BE-A.book Page 78 Wednesday, May 7, 2008 9:01 PM

Navigation 79
Other Functions
Displaying POIs on a map
Using this function, you can display POIs on the current map screen.
1Touch the current map screen.
2Select (points of interest).
3Select desired POIs using the displayed category keys.
When selecting two or more categories,
select to make a selection of them. The
selection of up to five categories is available. (all local POIs): Use this key to search for all
local points of interest (see below).
Once you have made your selection of POIs, corresponding mark-
ers will appear on the current map screen.
To delete the markers for these POIs, See Page 82.
NOTE
Displayed information about each POI faci lity might not include recent changes.
It is recommended that you check the lo cation or business days/hours before
departure.
Impreza_B1962BE-A.book Page 79 Wednesday, May 7, 2008 9:01 PM

80 Navigation
Other Functions
■Local search
1Touch the current map screen.
2Select (points of interest).
3Select (all local points of interest).
When searching local points of interest, it is necessary to set in
advance the category you want to make a search to the Quick POI.
(See Page 63.)
4Select the POI you want to find from the list of catego-
ries.
: Use this key to display up to five previous POIs.
: Use this key to display the previous POI.
: Use this key to display the next POI.
: Use this key to display up to five of the next POIs. : Use this key to search through the list by distance.
: Use this key to search through the list by icon type.
: Use this key to search through the list by name (alpha-
betical search).
: Use this key to display a list of POIs only along the
route up to the destination.
Once you have made your selection of POIs, corresponding mark-
ers will appear on the map.
Impreza_B1962BE-A.book Page 80 Wednesday, May 7, 2008 9:01 PM