ignition SUBARU LEGACY 2005 4.G Manual Online

5-18
Audio
Type B audio set (if equipped)
The radio will operate only when the ignition switch is in the “ACC” or “ON”
position.
PUSH POWER-VOL
SEEK
SCAN TUNE
TRACK
AUDIO
6 CD CHANGER P-201UH
BAL RPT RDM LOAD
FM AMCD
123 456
UB5204AA

5-31
Audio
– CONTINUED –
If you accidentally press the button and cancel the
track-repeat-play mode, press it again to reselect
the repeat play mode. "If you perform a fast-forward or fast-reverse op-
eration while the player is in repeat-play mode, the
repeat-play mode will remain active even after you
skip tracks. " If you perform a forward-direction or backward-
direction skip operation while the player is in re-
peat-play mode, the player will jump to the follow-
ing/previous track but the repeat-play mode will
remain active. " The repeat-play mode will be cancelled if you
perform any of the following steps: "Press the “ ” or “ ” side of the SEEK/
SCAN button " Press the “RPT” button.
" Press the “RDM” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. "
To repeat the currently playing disc
To repeat the currently playing CD, press the “RPT”
button twice while a track is playing. The display will
show “D-RPT”, and the CD will be played repeatedly.
To cancel the disc repeat-play mode, press the “RPT”
button once more. The “D-RPT” indication will go off,
and the normal playback mode will be resumed.
NOTE " Each time you briefly press the button, the mode
will change to the next one in the sequence shown
below.
RPT D-RPT CANCEL
RPT
UB5213BA

5-32
Audio
If you accidentally press the button and cancel the
disc-repeat-play mode, press it again to reselect
the disc-repeat-play mode. "
The disc-repeat-play mode will be cancelled if
you perform any of the following steps:
"Press the “ ” or “ ” side of the SEEK/
SCAN button " Press the “RPT” button.
" Press the “RDM” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. !
Random playback
Press the “RDM” button while a disc is being played
back to play all of the tracks on the disc in a random
order. The “RDM” indicator will come on and all songs
on the disc will be played in a random order.
To cancel the random mode, press the button again.
Then the “RDM” indicator goes out, and normal play-
back mode is restored.
NOTE " Random playback will be cancelled if you per-
form any of the following steps: "Press the “RPT” button
" Press the “ ” or “ ” side of the SEEK/
RPT D-RPT CANCEL
RDM
UB5214BA

5-33
Audio
– CONTINUED –
SCAN button "Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position.
" If you fast-forward the disc during random play-
back, the player will cancel the fast-forwarding
when the end of the last track on the disc is
reached and will then return to the random play-
back mode. If you fast-reverse the disc during ran-
dom playback, the fast-reversing will be canceled
as soon as the beginning of the track being played
is reached. The player will then return to the ran-
dom playback mode. " If you perform a forward direction skip while a
track is being played in the random playback
mode, the player will random select another track
and play it. If you perform a backward direction
skip, the disc will return to the beginning of the
currently playing track. !
Scan
The scan mode lets you listen to the first 10 seconds of each track on the disc in succession. Press the
“ ” side of the SEEK/SCAN button to start scanningthrough all tracks upward beginning with the track fol-
lowing the currently selected one. Press the “ ” side
of the button to start scanning through all tracks down-
ward beginning with the track preceding the currently
selected one. After all tracks on the disc have been
scanned, normal playback mode is restored.
To cancel a scan, press the “ ” or “ ” side of the
button again.
SEEK
SCAN
UB5212DA

5-34
Audio
NOTE
The scan mode will be cancelled if you perform
any of the following steps:"
Press the “RPT” button
" Press the “RDM” button
" Select the radio mode
" Press the disc select button
" Press the “ ” button
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position.
! How to unload CDs from the player
" Ejecting a CD from the player
Of the discs loaded, you can select and remove only
one disc.0
1. Use the disc select button to select the disc to be
ejected.
123 456
UB5210AA

5-37
Audio
– CONTINUED –
Type C audio set (if equipped)
The audio set will operate only when the ignition switch is in the “ACC” or
“ON” positions.
PUSH POWER-VOL
SEEK
SCAN
FOLDER
TUNE
TRACK
AUDIO
MP3
6 CD CHANGER P-201UE
BAL RPT
RDM
TEXTLOAD
FM AMCD
123 456
UB5205AA

5-50
Audio
below.
If you accidentally press the button and cancel the
track/file (track) repeat-play mode, press it again
to reselect the repeat-play mode. "
The repeat-play mode will be cancelled if you
perform any of the following steps: "Press the “RPT” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Press the “ ” or “ ” side of the SEEK/
SCAN button " Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. "
To repeat the currently playing disc/folder
To repeat the currently playing disc/folder, press the
“RPT” button twice while a track/file (track) is playing.
The display will show “D-RPT”, and the disc/folder will
be played repeatedly.
To cancel the disc/folder repeat play mode, press the “RPT” button once more. The “D-RPT” indication will
go off, and the normal playback mode will be resumed.
NOTE " Each time you briefly press the button, the mode
will change to the next one in the sequence shown
below.
RPT D-RPT CANCEL
RPT
RDM
UB5217BA

5-51
Audio
– CONTINUED –
If you accidentally press the button and cancel the
disc/folder repeat-play mode, press it again to re-
select the disc/folder repeat-play mode. "The disc/folder repeat-play mode will be can-
celled if you perform any of the following steps:
"Press the “RPT” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Press the “ ” or “ ” side of the SEEK/
SCAN button " Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. !
Random playback
Press the “RPT” button briefly during disc/folder play-
back to play all of the tracks/files (tracks) on the disc/
folder in a random order. The display will show “RDM”,
and all of the tracks on the disc/folder will be played in
a random order.
To cancel random playback, press the “RPT” button
again for at least 1.5 second. The “RDM” indication will
go off, and the normal playback mode will be resumed.
NOTE
Random playback will be cancelled if you perform
any of the following steps: " Press the “RPT” button
RPT D-RPT CANCEL
RPT
RDM
UB5217BA

5-52
Audio
"
Press the “ ” or “ ” side of the SEEK/SCAN
button " Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position.
! Auto tuning (scan mode)
The scan mode lets you listen to the first 10 seconds
of each track/file (track) in succession. Press the “ ”
side of the SEEK/SCAN button for 1.5 second or long-
er to start scanning upward beginning with the track/
file (track) following the currently selected one. Press the “ ” side of the button to start scanning down-
ward beginning with the track/file (track) preceding the
currently selected one. When all tracks/files (tracks) in
the disk/folder have been scanned, normal playback
will be resumed. To cancel the scan mode, press the
“ ” or “ ” side of the button for 1.5 second or long- er.
NOTE
The scan mode will be cancelled if you perform
any of the following steps: "
Press the “RPT” button
" Press the “ ” or “ ” side of the TUNE/
TRACK button" Press the “ ” or “ ” side of the SEEK/SCAN
button " Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position.
SEEK
SCAN
UB5212DA

6-2
Interior equipment
Interior equipmentInterior light
When leaving your vehicle, make sure the light is
turned off to avoid battery discharge. !
Dome light
The light switch has three positions: : The light stays on continuously.
Middle position: The light comes on when any door is
opened. The light remains on for several seconds and
gradually goes out after all doors are closed or if the
key is inserted in the ignition switch. The light also can be turned on by use of the remote
keyless entry transmitter. See the “Remote keyless
entry system (if equipped)” in chapter 2 for detailed in- formation.
The setting of the period for which the light stays on
can be changed by a SUBARU dealer.
Contact the nearest SUBARU dealer for details.
: The light stays off.
UB6500BA