belt SUZUKI BALENO 1999 1.G Owners Manual
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 1999, Model line: BALENO, Model: SUZUKI BALENO 1999 1.GPages: 65, PDF Size: 3.28 MB
Page 2 of 65
60G-74E
MODIFICATION WARNING
60G-00-004
The circle with a slash in this manual
means "Don't do this" or "Don't let this
happen".
Do not modify this vehicle. Modification
could adversely affect safety, handling,
performance, or durability and may
contravene regulations. In addition,
damage or performance problems
resulting from modification may not be
covered under warranty.
Improper installation of mobile
communication equipment such as
cellular talephones or CB (Citizen's
Band) radios may cause electronic
interference with your vehicle's ignition
system, resulting in vehicle
performance problems. Consult your
MARUTI dealer or qualified service
technician for advice on installing such
mobile communication equipment.
0-2
Copying, quoting or reproduction of any
part of this manual is not permitted without
explicit approval by MARUTI UDYOG
LIMITED.
60G-74E
WARRANTY POLICY
WARRANTY POLICY
Maruti Udyog Limited (hereinafter called "Maruti"), warrants that each
new Maruti vehicle distributed in India by Maruti and sold by an
authorised Maruti dealer will be free, under normal use and service,
from any defects in material and workmanship at the time of
manufacture SUBJECT TO THE FOLLOWING TERMS AND
CONDITIONS:
(1) Qualification:
To qualify for this warranty:
(a) The Maruti vehicle must be delivered by Maruti authorised
dealer and set-up, serviced by Maruti authorised dealer/
service station.
(b) The warranty registration card in respect of each vehicle
must be completed by the dealer at the time of delivery
of the vehicle and dealer should retain the same.
(2) Term:
The term of the warranty shall be twenty four (24) months
or 40,000 kilometers (whichever occurs first) from the date
of delivery to the first owner.
(3) Maruti's Warranty Obligation:
If any defect(s) should be found in a Maruti vehicle within the
term stipulated above, Maruti's only obligation is to repair or
replace at its sole discretion any part shown to be defective,
with a new part or the equivalent at no cost to the owner for
parts or labour, when Maruti acknowledges that such a defect
is attributable to faulty material or workmanship at the time of
manufacture. The owner is responsible of any repair or
replacements which are not covered by this warranty.
(4) Limitation:
This warranty shall not apply to:
(a) normal maintenance service required other than the three
free services, including without limitation, oil and fluid
changes, headlight aiming, fastener retightening, wheel
balancing, wheelalignment and tyre rotation, cleaning of
injectors, adjustments of carburettor, ignition timing, clutch
and valve clearance.
(b) the replacement of normal wear parts including without
limitation, bulbs, battery, tyres and tubes, spark plugs, belts,
hoses, filters, wiper blades, brushes, contact points, fuses,
clutch disc, brake shoes, brake pads, cable and all rubber
parts (except oil seal and glass run).
(c) any vehicle which has been used for competition or racing.
(d) any repairs or replacement required as a result of accidents
or collision.
(e) any defects caused by misuse, negligence, abnormal use or
insufficient care.
(f) any vehicle which has been modified or altered, including
without limitation, the installation of performance accessories.
(g) any vehicle on which parts or accessories not approved by
Maruti have been used.
(h) any vehicle which has not been operated in accordance with
the operating instructions in the Maruti Owner's Manual,
(i) any vehicle which has not received, during the warranty
term, the service inspections prescribed in the Maruti
Owner's Manual.
G) any vehicle which has been assembled, disassembled,
adjusted or repaired by other than an Maruti authorised
2-1
Page 3 of 65
60G-74E
MODIFICATION WARNING
60G-00-004
The circle with a slash in this manual
means "Don't do this" or "Don't let this
happen".
Do not modify this vehicle. Modification
could adversely affect safety, handling,
performance, or durability and may
contravene regulations. In addition,
damage or performance problems
resulting from modification may not be
covered under warranty.
Improper installation of mobile
communication equipment such as
cellular talephones or CB (Citizen's
Band) radios may cause electronic
interference with your vehicle's ignition
system, resulting in vehicle
performance problems. Consult your
MARUTI dealer or qualified service
technician for advice on installing such
mobile communication equipment.
0-2
Copying, quoting or reproduction of any
part of this manual is not permitted without
explicit approval by MARUTI UDYOG
LIMITED.
60G-74E
WARRANTY POLICY
WARRANTY POLICY
Maruti Udyog Limited (hereinafter called "Maruti"), warrants that each
new Maruti vehicle distributed in India by Maruti and sold by an
authorised Maruti dealer will be free, under normal use and service,
from any defects in material and workmanship at the time of
manufacture SUBJECT TO THE FOLLOWING TERMS AND
CONDITIONS:
(1) Qualification:
To qualify for this warranty:
(a) The Maruti vehicle must be delivered by Maruti authorised
dealer and set-up, serviced by Maruti authorised dealer/
service station.
(b) The warranty registration card in respect of each vehicle
must be completed by the dealer at the time of delivery
of the vehicle and dealer should retain the same.
(2) Term:
The term of the warranty shall be twenty four (24) months
or 40,000 kilometers (whichever occurs first) from the date
of delivery to the first owner.
(3) Maruti's Warranty Obligation:
If any defect(s) should be found in a Maruti vehicle within the
term stipulated above, Maruti's only obligation is to repair or
replace at its sole discretion any part shown to be defective,
with a new part or the equivalent at no cost to the owner for
parts or labour, when Maruti acknowledges that such a defect
is attributable to faulty material or workmanship at the time of
manufacture. The owner is responsible of any repair or
replacements which are not covered by this warranty.
(4) Limitation:
This warranty shall not apply to:
(a) normal maintenance service required other than the three
free services, including without limitation, oil and fluid
changes, headlight aiming, fastener retightening, wheel
balancing, wheelalignment and tyre rotation, cleaning of
injectors, adjustments of carburettor, ignition timing, clutch
and valve clearance.
(b) the replacement of normal wear parts including without
limitation, bulbs, battery, tyres and tubes, spark plugs, belts,
hoses, filters, wiper blades, brushes, contact points, fuses,
clutch disc, brake shoes, brake pads, cable and all rubber
parts (except oil seal and glass run).
(c) any vehicle which has been used for competition or racing.
(d) any repairs or replacement required as a result of accidents
or collision.
(e) any defects caused by misuse, negligence, abnormal use or
insufficient care.
(f) any vehicle which has been modified or altered, including
without limitation, the installation of performance accessories.
(g) any vehicle on which parts or accessories not approved by
Maruti have been used.
(h) any vehicle which has not been operated in accordance with
the operating instructions in the Maruti Owner's Manual,
(i) any vehicle which has not received, during the warranty
term, the service inspections prescribed in the Maruti
Owner's Manual.
G) any vehicle which has been assembled, disassembled,
adjusted or repaired by other than an Maruti authorised
2-1
Page 4 of 65
WARRANTY POLICY
60G-74E
dealer/service station,
(k) any vehicle which has been used for purposes other than
what it was designed for.
(I) any damage or deterioration caused by industrial pollution
and bird droppings,
(m) insignificant defects which do not affect the function of the
vehicle including without limitation sound, vibration and fluid
seep,
(n) any natural wear and tear including without limitation, ageing
etc.
For Maruti Air-Conditioned Vehicles
(o) V-belts, hoses and gas leaks.
(5) Extent of Warranty:
This warranty is the entire written warranty given by Maruti for
Maruti vehicles and no dealer or its or his agent or employee
is authorised to extend or enlarge this warranty and no dealer
or its or his agent or employee is autorised to make any oral
warranty on Maruti's behalf.
Maruti reserves the right to add any improvements or change
the design of any model at any time with no obligation to make
the same changes on units previously sold.
(6) Warranty Service:
To obtain warranty service, the complete vehicle must be
presented at the owner's expenses to any authorised Maruti
dealer.
(7) Owner's Warranty Responsibilities:
It is responsibility of each owner to:
(a) make certain that the warranty registration/PDI card was
completed at the time of delivery of the vehicle;
(b) have performed, at his own expenses, by an Maruti
authorised dealer/service station all the service inspections
specified in the Maruti "Owner's Manual and Service Booklet"
and maintain adequate proof that such service inspections
have been performed.
(c) make certain that the Maruti authorised dealer/service station
performing the service inspection has certified the work on
the "Maintenance Service Record" page in the "Owner's
Manual and Service Booklet" and
(d) present the Maruti "Owner's Manual and Service Booklet" to
the authorised Maruti dealer whenever requesting service
inspections or warranty service.
If the "Owner's Manual and Service Booklet" should be lost or
destroyed the owner should consult the authorised Maruti dealer from
whom the vehicle was purchased for instructions concerning
replacement of the "Owner's Manual and Service Booklet".
(8) Disclaimer of Consequential Damage:
Maruti assumes no responsibility for loss of vehicle, loss of time,
inconvenience or any other indirect incidental or consequential
damage resulting from the vehicle not being available to the
owner because of any defect covered by this warranty.
(9) Change of owner
Even if ownership of the vehicle changes, the remaining
warranty period is effective for the new owner.
2-2
60G-74E
EMISSION WARRANTY
Maruti offers the Emission Warranty on all Maruti vehicles (aparts from the Regular warranty and will run parallel to the regular
product warranty) only in four metropolitan cities (New Delhi, Kolkata, Mumbai and Chennai) with effect from July 1st, 2001.
Terms:
The Emission Warranty will be applicable for 80,000 kms or 3 years (Whichever comes earlier) from the date of delivery to the
first owner. The remaining warranty terms will be valid in case of any change in ownership provided the production of all valid documents.
Conditions :
1. Under Emission Warranty, Warranty claims will be admitted for a prima facie examination, in case vehicle fails to meet to the
Emission Standard as specified In sub rule (2) of rule no. 115 of Central Motor Vehicles Rules (CMVR), 1989.
2. The warranty claims will only be accepted after examination carried out by Maruti or it's dealer which leads to firm conclusions
that the
a) Original settings have not been tempered in any case.
b) Part (as given in Annexure-A) has a manufacturing defect.
c) Vehicle is unable to meet the Emission Standards (as given in 1.), inspite of the vehicle having been maintained and used
in accordance with the instructions as specified in Owner's Manual and Service Booklet and the used fuel and different oils
(Engine oil, Transmission oil, Brake oil etc.) are also as per specification.
3. The method of examination for deciding the warranty of the parts will be at the sole discretion of Maruti and it's dealer and
results of the examination will be final and binding. If after examination, the warrantable condition is not established, Maruti
and it's dealer has the right to charge all, or part of the cost of such examination.
4. Under Emission Warranty, the parts (as given in Annexure-A) will be changed free of cost, but the consumables will be charged
as per actual.
5. If the part covered under Emission Warranty or the associated parts, are not independently replaceable, on account of these
being integral parts of a complete assembly, Maruti and it's dealer will have the sole discretion to replace either the entire assembly
or by using some of the parts of the system through suitable repairs or modifications.
8
9
Page 6 of 65
60G-74E
BEFORE DRIVING
BEFORE DRIVING
Fuel Recommendation 3-1
Remote Keyless Entry System (if equipped) 3-2
Keys 3-2
Door Locks 3-3
Windows 3-5
Mirrors 3-8
Front Seat Adjustment 3-9
Driver Seat Height Adjuster 3-10
Adjustable Head Restraints (if equipped) 3-10
Seat Belts 3-11
BEFORE DRIVING
60G-74E
FUEL RECOMMENDATION
UNLEADED
FUEL ONLY
You must use unleaded petrol with an
octane number (RON) of 87 or higher. Your
vehicle is fitted with a restrictor in the fuel
filler pipe which will not allow the use of
large nozzle used for dispensing leaded fuel
at filling station. A label is also attached
near the fuel filler pipe of your vehicle that
states: "UNLEADED FUEL ONLY".
CAUTION
Use of leaded fuel in vehicle equipped
with catalytic converter is prohibited,
because leads deactivates the pollutant
reducing components of catalytic
converter and may result in permanent
damage to catalytic converter.
Petrol/Ethanol Blends
Blends of unleaded petrol and ethanol (grain
alcohol), also known as gasohol, are
commercially available in some areas.
Blends of this type may be used in your
vehicle if they are no more than 10%
ethanol. Make sure this petrol-ethanol blend
has octane ratings no lower than those
recommended for petrol.
Petrol/Methanol Blends
Blends of unleaded petrol and methanol (wood
alcohol) are also commercially
available in some areas. DO NOT USE
fuels containing more than 5% methanol
under any circumstances. Fuel system
damage or vehicle performance problems
resulting from the use of such fuels are not
the responsibility of MARUTI and may not
be covered under Warranty.
Fuels containing 5% or less methanol may
be suitable for use in your vehicle if they
contain cosolvents and corrosion inhibitors.
NOTE:
If you are not satisfied with the driveability
or fuel economy of your vehicle when you
are using a petmrol/alcohol blend, you should
switch back to unleaded petrol containing no
alcohol.
CAUTION
Be careful not to spill fuel containing
alcohol while refuelling. Fuels
containing alcohol can cause paint
damage, which is not covered under
Warranty.
CAUTION
The fuel tank has an air space to allow
for fuel expansion in hot weather. If you
continue to add fuel after the filler
nozzle has automatically shut off or an
initial blowback occurs, the air chamber
will become full. Exposure to heat when
fully fuelled in this manner will result
in leakage due to fuel expansion. To
prevent such fuel leakage, stop filling
after the filler nozzle has automatically
shut off, or when using an alternative
non automatic system, initial vent
blowback occurs.
3-1
Page 11 of 65
60G-74E
BEFORE DRIVING
DRIVER SEAT HEIGHT ADJUSTER
(if equipped)
ADJUSTABLE HEAD RESTRAINTS
(if equipped)
606-03-015
If the driver's seat is equipped with a seat
height adjuster knob on the outboard side of
the seat, adjust the seat to the proper height
by turning the adjuster knob.
WARNING
72F-03-014
Adjusting Seatbacks
The seatbacks can be adjusted to different
angles. To adjust the seatback angle, pull up
the lever on the outboard side of the seat,
move the seatback to the desired position, and
release the lever to lock the seatback in place.
Seatbacks should always be in an
upright position when driving, or seat
belt effectiveness may be reduced. Seat
belts are designed to offer maximum
protection when seatbacks are in the
fully upright position.
70F-01-019
WARNING
Head restraints are designed to help reduce
the risk of neck injuries in the case of an
accident. Adjust the head restraint to the
position which places the top of the head
restraint closest to the top or your ears.
23
3-10
BEFORE DRIVING
60G-74E
SEAT BELTS
60G-03-016
To raise the head restraint, pull upward ort the
restraint until it clicks. To lower the restraint,
push down on the restraint while holding in
the lock lever. If a head restraint must be
removed (for cleaning, replacement, etc.),
push in the lock lever and pull the head
restraint all the way out.
70F-01-022E
Wear your Seat Belts at All Times.
WARNING
Never allow persons to ride in the
cargo area of a vehicle. In the event
of an accident, there is a much
greater risk of injury for persons who
are not riding In a seat with their seat
belt securely fastened.
Seat belts should always be adjusted
so the lap portion of the belt is worn
low across the pelvis, not across the
waist. Shoulder straps should be
WARNING
1 worn on the outside shoulder only,
and never under the arm. Seat belts
should never be worn with the straps
twisted and should be adjusted as
tightly as is comfortable to provide
the protection for which they have
been designed. A slack belt will
provide less protection than one
which is snug.
Make sure that each seat belt buckle
is inserted into the proper buckle
catch. It is possible to cross the
buckles in the rear seat.
Do not wear your seat belt over hard
or breakable objects in your pockets
or on your clothing. If an accident
occurs, objects such as glasses,
pens, etc. under the seat belt can
cause injury.
Never use the same seat belt on
more than one occupant and never
attach a seat belt over an infant or
child being held on an occupant's
lap. Such seat belt use could cause
serious injury in the event of an
accident. _K
3-11
24
Page 12 of 65
60G-74E
BEFORE DRIVING
Pregnant women should use seat
belts, although specific recommen-
dations about restraint use should
be made by the woman's medical
advisor.
Periodically inspect seat belt
assemblies for excessive wear and
damage. Seat belts should be replaced
if webbing becomes frayed,
contaminated, or damaged in any way.
It is essential to replace the entire seat
belt assembly after it has been
stressed in an impact, even if damage
to the assembly is not obvious.
Infants and small children should never
be transported unless they are properly
restrained. Restraint systems for
infants and small children can be
purchased locally and should be used.
Make sure that the system you
purchase meets applicable safety
standards. Read and follow all the
directions provided by the
manufacturer.
Avoid contamination of seat belt
webbing by polishes, oils, chemicals,
and particularly battery acid. Cleaning
may safely be carried out using mild
soap and water.
For children, if the shoulder belt
irritates the neck or face, move the child
closer to the center of the vehicle.
A WARNING
Be sure to inspect all seat belt
assemblies after any collision. Any seat
belt assembly which was in use during
a collision (other than a very minor one)
should be replaced, even if damage to
the assembly is not obvious. Any seat
belt assembly which was not in use
during a collision should be replaced
if it does not function properly or is
damaged in any way.
70F-01-021
There are two types of seat belt, "Lap-shoulder
belt" and "Lap belt".
To fasten the seat belt, sit up straight and well
back in the seat, pull the buckle tongue
attached to the seat belt across your body and
slide it into the buckle catch on the opposite
side until you hear a "click".
25
3-12
BEFORE DRIVING
60G-74E
70F-01-022E
To reduce the risk of sliding under the belt
during a collision, position the lap portion of
the belt across your lap as low on your hips
as possible and adjust the belt to a snug fit
using the proper method for each type of the
belt as described below. Make sure that the
belt is not twisted.
70F-01-023E
To unfasten the belt, press the release button
on the buckle catch.
70F-01-024E
To Adjust the Belt
• Lap-shoulder belt
Pull the shoulder portion of the belt
upwards through the tongue plate.
The length of the diagonal shoulder strap
adjusts itself to allow freedom of movement.
The seat belt has an emergency locking
retractor (ELR), which is designed to lock the
seat belt only during a sudden stop or impact.
3-13
26
Page 13 of 65
60Q-74E
BEFORE DRIVING
70F-01-025
Your vehicle is equipped with the shoulder
anchor height adjusters for the front seat belts,
adjust the shoulder anchor height so that the
shoulder belt rides on the center of the
outboard shoulder. To adjust the shoulder
anchor height, slide the anchor up or down
while pulling the lock knob out. After
adjustment, make sure that the acnhor is
securely locked.
No modifications or additions of any
sort should be made to the seat belt or
its operating mechanism.
60G-03-017
Seat Belt Hanger (if equipped)
When you move a seatback, make sure
the belt webbing is hooked in the belt
hangers so the seat belts are not
caught by the seatback, seat hinge, or
seat latch. This helps prevent damage
to the belt system.
60G-03-018E
Lap belt
On this belt the adjuster is incorporated in
the tongue unit.
To tighten the belt, pull the free end of the
belt across alongside the lap strap until it
is adjusted to a snug comfortable position.
27
3-14
BEFORE DRIVING
60G-74E
60G-03-019E
To lengthen, release the tongue from the
buckle unit, pull the tongue (adjuster) in the
direction of the arrow, at right angles to the
belt. The tongue should then be refitted into
the buckle unit and the belt tightened as
previously described.
60G-03-020E
NOTE:
To identify the center seat belt buckle catch
and tongue in the rear seat, "CENTER" is
moulded on the buckle catch and tongue of
the center lap belt. The buckle catches are
designed so a buckle tongue can not be
inserted into the wrong buckle catch.
70F-01-030
Child Restraint Systems
MARUTI highly recommends that you use a
child restraint system to restrain infants and
small children. Many different types of child
restraint systems are available; make sure that
the restaint system you select meets
applicable safety standards.
All child restraint systems are designed to be
secured in vehicle seats by lap belts or the
lap portion of lap-shoulder belts. Whenever
possible, Maruti recommends that child
restraint systems be installed on the rear seat.
According to accident statistics children are
safer when properly restrained in rear seating
positions than in front seating positions.
3-15
28
Page 14 of 65
60G-74E
BEFORE DRIVING
If you must use a front-facing child restraint in
the front passenger's seat, adjust the
passenger's seat as far back as possible.
Children could be endangered in a
crash if their child restraints are not
properly secured in the vehicle. When
installing a child restraint system, be
sure to follow the instructions below.
Be sure to secure the child in the
restraint system according to the
manufacturer's Instructions.
60G-03-021E
Installation with lap-shoulder seat belts
Note:
The lap-shoulder belts of your vehicle have
emergency locking retractors (ELRs) that can
not function as an automatic locking retractor
(ALR). Use the installation method described
in the instructions provided by the child
restraint system manufacturer that does not
require the ALR function.
Install your child restraint system according
to the instructions provided by the child
restraint system manufacturer. Make sure that
the seat belt is securely latched.
70F-01-031
Try moving the child restraint system in all
directions, to make sure it is securely installed.
Tighten the belt if necessary.
29
3-16
BEFORE DRIVING
60G-74E
70F-01-032E
Installation with a lap belt
Install your child restraint system according
to the instructions provided by the child
restraint system manufacturer.
To lengthen or tighten the belt, refer to the "Lap
belt" item in this "SEAT BELTS" section. After
making sure that the seat belt is securely
latched, try moving the child restraint system
in all directions, to make sure it is securely
installed. If you need to tighten the belt, pull
the free end of the webbing.
3-17
30
Page 28 of 65
OTHER CONTROLS AND EQUIPMENTS
60G-74E
FUEL FILLER CAP
60G-06-002
The fuel filler cap is located on the left rear
side of the vehicle. The fuel filler lid can be
unlocked by pulling up the opener lever located
on the outboard side of the driver's seat and
locked by simply closing the lid.
Remove the fuel filler cap slowly. The
fuel may be under pressure and may
spray out, causing injury.
Petrol Is extremely flammable. Do not
smoke when refuelling, and make sure
there are no open flames or sparks in
the area.
60G-06-OO3
The fuel tank filler cap has a "screw-on ratcheting
type" feature.
• To remove - turn the cap counterclockwise.
Turn the cap slowly to allow any residual
pressure to escape.
• To install - turn the cap clockwise and
tighten it securely until a "ratcheting"
(clicking) sound is heard. The "ratcheting"
sound indicates that the cap is on properly.
6-3
56
60G-74E
OTHER CONTROLS AND EQUIPMENT
FOLDING REAR SEATS
70F-04-008E
If you need to replace the fuel cap, use
only a cap specified for your model.
Using an improper fuel cap can cause
a serious malfunction of the fuel
system. You can get the correct
replacement cap from your MARUTI
dealer.
63B-06-013
The rear seat of your vehicle can be folded
forward ro provide additional luggage space.
To lower the seatback, hook the webbing of
both outboard lap-shoulder belts in the belt
hangers, pull up the lock knobs (© and @)
simultaneously and fold forward the seatback.
To raise the seatback, lift it up and push back
until it locks into place.
When you move a seatback, make sure
the belt webbing is hooked in the belt
hangers (if equipped) so the seat belts
are not caught by the seatback, seat
hinge, or seat latch.This helps prevent
damage to the belt system.
63B-06-014
When returning a rear seat to the
normal position, make sure that
movement of the seatback is
unobstructed and the seatback is
securely latched.
57
6-4
Page 32 of 65
S0G-74E
OPERATING YOUR VEHICLE
OPERATING YOUR VEHICLE
Exhaust Gas Warning 7-1
Daily Inspection Checklist 7-1
Starting the Engine 7-2
Using the Transmission 7-3
Braking 7-4
Running-in 7-5
Catalytic Converter (if equipped) 7-6
Improving Fuel Economy 7-7
Trailer Towing 7-7
OPERATING YOUR VECHILE
60G-74E
EXHAUST GAS WARNING
DAILY INSPECTION CHECKLIST
60G-07-001E
Avoid breathing exhaust gases.
Exhaust gases contain carbon
monoxide, a potentially lethal gas that
is colourless and odourless. Since
carbon monoxide is difficult to detect
by itself, be sure to take the following
precautions to help prevent carbon
monoxide from entering your vehicle.
• Do not leave the engine running in
garages or other confined areas.
• Do not park with the engine running
for a long period of time, even in an
open area. If it is necessary to sit for
a short time in a parked vehicle <=>
with the engine running, make sure
the air intake lever is set to "FRESH
AIR" and the fan is at high speed.
To allow proper operation of your
vehicle's ventilation system, keep
the air inlet grille in front of the
windscreen clear of snow, leaves, or
other obstructions at all times.
Keep the exhaust tailpipe area clear
of snow and other material to help
reduce the buildup of exhaust gases
under the vehicle.This is particularly
important when parked in blizzard
conditions.
Have the exhaust system inspected
periodically for damage and leaks.
Any damage or leaks should be
repaired immediately.
7-1
70F-05-007
Before driving:
1) Make sure that windows, mirrors, lights,
and reflectors are clean and unobstructed.
2) Check the tyres.
3) Look for fluid and oil leaks.
NOTE:
It is normal for water to drip from the air
conditioning system after use.
4) Adjust the seat/head restraint.
5) Check the brake pedal and the parking
brake lever.
6) Adjust the mirrors.
7) Make sure that you and passengers have
properly fastened your seat belts.
8) Make sure that all warning lights come on
as the key is turned to the "ON" or "START'
position.
9) Check all gauges.
10) Make sure that the brake fluid level
warning light is off when the parking brake
is released with the ignition switch in "ON"
position.
66
65