turn signal bulb SUZUKI BALENO 1999 1.G Owners Manual

60G-74E
INSPECTION AND MAINTENANCE

60G-09-031

Headlights

Open the bonnet. Disconnect the coupler.Turn

the lock ring counterclockwise and remove it.

Remove the sealing rubber.

NOTE:

Your vehicle is provided with two spare

headlight bulbs for replacement in

emegency.
60G-09-037

Push the retaining spring forward and unhook

it. Then remove the bulb. Install a new bulb in

the reverse order of removal.

NOTE:

Your vehicle is provided with two spare

headlight bulbs for replacement in emergency

situations.
70F-07-0S0E

Front Clearance/Turn Signal Light, Side

Turn Signal Light, rear Combination

Light, Registration Plate Light.

To remove a bulb holder from a light housing,

turn the holder counterclockwise and pull it

out. To install the holder, push the holder in

and turn it clockwise.

Two types (small oval and round) of bulb are

used for these lights. To remove and install a

small oval bulb, simply pull out or push in the

bulb.

109

9-26

INSPECTION AND MAINTENANCE

60G-74E

70F-07-051E

To remove a round bulb from a bulb holder,

push in the bulb and turn it counterclockwise.

To install a new bulb, push it in and turn it

clockwise. You can access the individual bulb

holders as described above:
60G-09-032

Front clearance light (A)

Open the bonnet.

Front turn signal light (B)

Trust this replacement job to your authorized

MARUTI dealer as the front bumper and the

headlight housing must be removed for this

job.
70F-07-054

Side turn signal light

Remove the lens by using a plain screw driver

covered with a soft cloth.

9-27
110