oil type SUZUKI SWIFT 2000 1.G Transmission Service User Guide

7C-2 CLUTCH
GENERAL DESCRIPTION
The clutch is a diaphragm-spring clutch of a dry single disc type. The diaphragm spring is of a tapering-finger
type, which is a solid ring in the outer diameter part, with a series of tapered fingers pointing inward.
The disc, carrying four torsional coil springs, is positioned on the transmission input shaft with an involute spline
fit.
The clutch cover is secured to the flywheel, and carries the diaphragm spring in such a way that the peripheral
edge part of the spring pushes on the pressure plate against the flywheel (with the disc in between), when the
clutch release bearing is held back. This is the engaged condition of the clutch.
Depressing the clutch pedal causes the release bearing to advance and pushes on the tips of the tapered fin-
gers of the diaphragm spring. When this happens, the diaphragm spring pulls the pressure plate away from the
flywheel, thereby interrupting the flow of drive from flywheel through clutch disc to transmission input shaft.
1. Crankshaft 6. Diaphragm spring
2. Flywheel 7. Release bearing
3. Clutch disc 8. Input shaft bearing
4. Pressure plate 9. Input shaft
5. Clutch cover 10. Release shaft

TRANSFER 7D-23
09913-75821 09930-40113 09913-50121 09913-75810
Bearing installer attach-
mentRotor holder Oil seal remover Bearing installer
09945-16070 09952-76011 09922-76140 09922-76150
Retainer ring installer set Snap ring pliers
(closing type)Bevel pinion shaft Bevel pinion nut
09922-76340 09922-76430 09951-16090
Rear collar Front collar Oil seal installer