check oil TATA SAFARI 2015 Owners Manual
[x] Cancel search | Manufacturer: TATA, Model Year: 2015, Model line: SAFARI, Model: TATA SAFARI 2015Pages: 161, PDF Size: 2.55 MB
Page 8 of 161
8
T TT T
T
A AA A
A
T TT T
T
A MO A MOA MO A MO
A MO
T TT T
T
ORS L ORS LORS L ORS L
ORS L
TD TDTD TD
TD
.. ..
. is committed to produce the vehicles
using environmentally sustainable technology. A number of
features have been incorporated in Tata Motors passenger
vehicles which have been designed to ensure environmental
compatibility throughout the life cycle of the vehicle. We would
like to inform you that your vehicle meets emission norms and
this is being regularly validated at the manufacturing stages.
As a user you too can protect the environment by operating
your vehicle in a proactive manner. A lot depends on your
driving style and the way you maintain your car. We have
given few tips below for your guidance.
DRIVING DRIVINGDRIVING DRIVING
DRIVING
¾Avoid frequent and violent accelerations.
¾Do not carry any unnecessary weight on the vehicle as
it overloads the engine. Avoid using devices requiring
high power consumption during slow city traffic
condition.
¾Monitor the vehicle’s fuel consumption regularly and if
showing rising trend get the vehicle immediately
attended at the Company’s Authorised Service Outlets.
ENVIR ENVIRENVIR ENVIR
ENVIR
ONMENT ONMENTONMENT ONMENT
ONMENT
AL PR AL PRAL PR AL PR
AL PR
O OO O
O
TECTION TECTIONTECTION TECTION
TECTION
¾Switch off the engine during long stops at traffic jams
or signals. If you need to keep the engine running, avoid
unnecessary revving it up or stopping and starting.
¾It is not necessary to rev up the engine before turning
it off as it unnecessarily burns the fuel.
¾Shift to higher gears as soon as it is possible. Use each
gear upto 2/3rd of it’s maximum engine speed. A chart
indicating gear shifting speeds is given in this book.
MAINTENANCE MAINTENANCEMAINTENANCE MAINTENANCE
MAINTENANCE
¾Ensure that recommended maintenance is carried out
on the vehicle regularly at the Authorised Service
Outlets.
¾As soon as you see any leakages of oil or fuel in the
vehicle we recommend to get it attended immediately.
¾Use only recommended grades and quantity of
lubricants and clean/uncontaminated and correct fuels.
¾Get your vehicle checked for emission periodically by
authorised dealer
ProCarManuals.com
Page 9 of 161
9
ENVIR ENVIRENVIR ENVIR
ENVIR
ONMENT ONMENTONMENT ONMENT
ONMENT
AL PR AL PRAL PR AL PR
AL PR
O OO O
O
TECTION TECTIONTECTION TECTION
TECTION
¾Ensure that fuel filter, oil filter and breather are checked
periodically and replaced, if required, as recommended
by Tata Motors.
¾Do not pour the used oils or coolants into the sewage
drains, garden soil or open streams. Dispose the used
filters and batteries in compliance with the current
legislation.
¾Do not allow unauthorised person to tamper with
engine settings or to carry modifications on the vehicle.
¾Never allow the vehicle to run out of fuel.
¾Parts like brake liners, clutch disc should be vacuum
cleaned. Do not use the compressed air for cleaning
these parts which may spread the dust in the
atmosphere.
¾While carrying out the servicing or repairs of your While carrying out the servicing or repairs of yourWhile carrying out the servicing or repairs of your While carrying out the servicing or repairs of your
While carrying out the servicing or repairs of your
vehicle you should pay keen attention to some of vehicle you should pay keen attention to some ofvehicle you should pay keen attention to some of vehicle you should pay keen attention to some of
vehicle you should pay keen attention to some of
the important engine aggregates and wiring the important engine aggregates and wiringthe important engine aggregates and wiring the important engine aggregates and wiring
the important engine aggregates and wiring
har harhar har
har
ness which gr ness which grness which gr ness which gr
ness which gr
ea eaea ea
ea
tly aff tly afftly aff tly aff
tly aff
ec ecec ec
ec
t emission. t emission.t emission. t emission.
t emission.
T TT T
T
hese hesehese hese
hese
components are :- components are :-components are :- components are :-
components are :-
1. 1.1. 1.
1.
Fuel injection equipments : pump, rail,Injectors, Fuel injection equipments : pump, rail,Injectors,Fuel injection equipments : pump, rail,Injectors, Fuel injection equipments : pump, rail,Injectors,
Fuel injection equipments : pump, rail,Injectors,
Nozzles and high pressure pipes. Nozzles and high pressure pipes.Nozzles and high pressure pipes. Nozzles and high pressure pipes.
Nozzles and high pressure pipes.2. 2.2. 2.
2.
Air Intake & Exhaust system especially for Air Intake & Exhaust system especially forAir Intake & Exhaust system especially for Air Intake & Exhaust system especially for
Air Intake & Exhaust system especially for
leakages. leakages.leakages. leakages.
leakages.
3. 3.3. 3.
3.
Cylinder head for valve leakage. Cylinder head for valve leakage.Cylinder head for valve leakage.
Cylinder head for valve leakage.
Cylinder head for valve leakage.
4. 4.4. 4.
4.
A AA A
A
ll filt ll filtll filt ll filt
ll filt
ers such as air ers such as airers such as air ers such as air
ers such as air
,, ,,
,
oil & fuel filt oil & fuel filt oil & fuel filt oil & fuel filt
oil & fuel filt
ers (check ers (checkers (check ers (check
ers (check
periodically). periodically).periodically). periodically).
periodically).
5. 5.5. 5.
5.
T TT T
T
urb urburb urb
urb
o oo o
o
char charchar char
char
ger & ger & ger & ger &
ger &
V VV V
V
acuum M acuum Macuum M acuum M
acuum M
o oo o
o
dula duladula dula
dula
t tt t
t
or OR it or OR itor OR it or OR it
or OR it
’’
’’
’
s ss s
s
vacuum hoses. vacuum hoses.vacuum hoses. vacuum hoses.
vacuum hoses.
6. 6.6. 6.
6.
EGR System & components. EGR System & components.EGR System & components. EGR System & components.
EGR System & components.
7. 7.7. 7.
7.
Electrical connections Electrical connectionsElectrical connections Electrical connections
Electrical connections
8. 8.8. 8.
8.
‘Service’ lamp contineously glows, please take ‘Service’ lamp contineously glows, please take‘Service’ lamp contineously glows, please take ‘Service’ lamp contineously glows, please take
‘Service’ lamp contineously glows, please take
the vehicle to Service Station. the vehicle to Service Station.the vehicle to Service Station. the vehicle to Service Station.
the vehicle to Service Station.
9. 9.9. 9.
9.
Catalytic Convertor Catalytic ConvertorCatalytic Convertor Catalytic Convertor
Catalytic Convertor
10. 10.10. 10.
10.
EMS wiring harness i.e. electrical connections to EMS wiring harness i.e. electrical connections toEMS wiring harness i.e. electrical connections to EMS wiring harness i.e. electrical connections to
EMS wiring harness i.e. electrical connections to
all sensors and actuators. all sensors and actuators.all sensors and actuators. all sensors and actuators.
all sensors and actuators.
This owner’s manual contains further information on driving
precautions and maintenance care leading to environment
protection. Please familiarise yourself with these aspects
before driving.
ProCarManuals.com
Page 69 of 161
69
PRIOR TO DRIVING
• •• •
•Opening bonnet Opening bonnetOpening bonnet Opening bonnet
Opening bonnet
• •• •
•Fuel level check Fuel level checkFuel level check Fuel level check
Fuel level check
• •• •
•Engine oil level check Engine oil level checkEngine oil level check Engine oil level check
Engine oil level check
• •• •
•Engine coolant check Engine coolant checkEngine coolant check Engine coolant check
Engine coolant check
Before you start driving you should carry out important checks on
your Safari. Please read this section carefully to know the procedure
for carrying out important checks.
ProCarManuals.com
Page 71 of 161
71
P R I O R T O D R I V I N GCHECKS CHECKSCHECKS CHECKS
CHECKS
CHECK CHECKCHECK CHECK
CHECK
•Fuel level (Refer page No. 72)
•Coolant level (Refer page No. 73)
•Engine oil level (Refer page No. 72)
•Tyre pressure (Refer page No. 124)
•Brake & clutch fluid level
(Refer page No. 115)
ENSURE ENSUREENSURE ENSURE
ENSURE
•Gear shift lever in neutral
position
•All switches & lamps working
•SRS, ABS , Brake fluidlevel indicator
and Engine lamp goes off
•Parking brake released
ADJUST ADJUSTADJUST ADJUST
ADJUST
•Driver Seat (Refer page No. 56)
•Rear view mirrors (Refer page No. 60 & 63)
•Steering column (Refer page No. 37)
ProCarManuals.com
Page 72 of 161
72
FUEL AND ENGINE OIL LEVEL CHECK FUEL AND ENGINE OIL LEVEL CHECKFUEL AND ENGINE OIL LEVEL CHECK FUEL AND ENGINE OIL LEVEL CHECK
FUEL AND ENGINE OIL LEVEL CHECK
Fuel Level Check Fuel Level CheckFuel Level Check Fuel Level Check
Fuel Level Check
1 . Check fuel level in tank. The same is indicated on the instrument
panel.
2 . If indicator is already in red zone remember to fill the fuel at
nearest filling station.
Engine Oil Level Check Engine Oil Level CheckEngine Oil Level Check Engine Oil Level Check
Engine Oil Level Check
Check engine oil level before starting the engine.
A. Open the bonnet.
B. Pull out the dipstick and wipe it with a cloth or paper towel.
C. Insert it all the way back in its tube.
D. Pull out the dipstick and look at the oil level at the end of the
dipstick.
Top up oil if the oil level is below midway of minimum mark.
NOTICE NOTICENOTICE NOTICE
NOTICE
Oil level should not exceed the max mark. Check the oil level
when vehicle is on level ground and wait for a few minutes after
switching off the engine.1. Engine Oil Filling Cap
2. Dip Stick
P R I O R T O D R I V I N G
Fuel Gauge Fuel GaugeFuel Gauge Fuel Gauge
Fuel Gauge
Low
Fuel Level
ProCarManuals.com
Page 109 of 161
109
FUEL FIL FUEL FILFUEL FIL FUEL FIL
FUEL FIL
TER & FUEL SY TER & FUEL SYTER & FUEL SY TER & FUEL SY
TER & FUEL SY
STEM STEMSTEM STEM
STEM
6. Refit the drain plug using a new sealing washer. Tighten
drain plug to 5 mkg. torque.
7. Fill, recommended quantity of fresh engine oil in the crank
case and secure the oil filler cap in its place.
8. Start the engine and run for a few minutes. The engine oil
pressure indicator lamp should go ‘off ’ after starting the
engine.
9. Check for engine oil leakages.
10. Stop the engine and recheck engine oil level after a few
minutes. If necessary add oil to bring the level to the upper
mark on the dipstick.
NOTICE NOTICENOTICE NOTICE
NOTICE
Use of reclaimed oil is not recommended
Priming Pump Priming PumpPriming Pump Priming Pump
Priming Pump
Priming pump is used for priming the fuel manually after
overhauling of the engine or after refitment of fuel lines. Pump
the fuel by means of priming pump until all air in the fuel line is
removed. Before cranking the engine ensure that there is no air
in the fuel system.
NOTICE NOTICENOTICE NOTICE
NOTICE
Please do not loosen/remove high pressure pipes and injectors
for air bleeding in the fuel.
M A I N T E N A N C E
F FF F
F
uel & F uel & Fuel & F uel & F
uel & F
ilt iltilt ilt
ilt
er D er Der D er D
er D
r rr r
r
aining ainingaining aining
aining
Loosen drain plugs by 1-2 turn and drain out water and other
sediments from fuel filter bowls depending on operating
conditions to ensure that no water is allowed to enter the fuel
system.
S SS S
S
edimen edimenedimen edimen
edimen
t tt t
t
er er er er
er
W WW W
W
a aa a
a
t tt t
t
er D er Der D er D
er D
r rr r
r
aining ainingaining aining
aining
Water sedimenter is located near fuel tank at rear left hand side
of the vehicle.
Loosen drain plug by 1-2 turns and drain out water and other
sediments from sedimenter when water level indicator lamp
glows in instrument cluster to ensure that no water is
allowed to enter the fuel system.
Sedimenter
ProCarManuals.com
Page 110 of 161
110
Gear Box Oil Gear Box OilGear Box Oil Gear Box Oil
Gear Box Oil
C CC C
C
heck heckheck heck
heck
ing of Oil L ing of Oil Ling of Oil L ing of Oil L
ing of Oil L
e ee e
e
v vv v
v
el elel el
el
1. Clean the oil level plug and surrounding area.
2 . Remove the oil level plug and check whether oil is dripping out.
Oil level must not be below the filler plug. Add oil to bring it to
the level.
3. Tighten oil level plug to 2-3 mkg. torque.
C CC C
C
hanging Oil in G hanging Oil in Ghanging Oil in G hanging Oil in G
hanging Oil in G
ear B ear Bear B ear B
ear B
o oo o
o
x xx x
x
1. Let the engine idle for about 5 min. in neutral, so that the gear box
oil is warmed up.
2. Clean the oil level plug, drain plug and surrounding area.
3. Place a container under gear box to collect the oil.
4. Remove the drain plug and let the oil drain out.
5. Also remove the oil level plug.
6. Tighten the oil drain plug and fill new recommended oil through oil
level plug and tighten the oil drain plug oil level plug to 2-3 mkg.
torque.
GEAR BO GEAR BOGEAR BO GEAR BO
GEAR BO
X OIL X OILX OIL X OIL
X OIL
1. Gear Box Oil Filler Plug / Level Plug
2. Gear Box Drain Plug
1
2
M A I N T E N A N C E
ProCarManuals.com
Page 111 of 161
111
TRANSFER CASE OIL TRANSFER CASE OILTRANSFER CASE OIL TRANSFER CASE OIL
TRANSFER CASE OIL
C CC C
C
heck heckheck heck
heck
ing Oil L ing Oil Ling Oil L ing Oil L
ing Oil L
e ee e
e
v vv v
v
el of el of el of el of
el of
T TT T
T
r rr r
r
ansf ansfansf ansf
ansf
er C er Cer C er C
er C
ase asease ase
ase
NO NONO NO
NO
TICE TICETICE TICE
TICE
Before checking or removing the oil, warming up of the transfer
case is necessary. This should be done by driving the vehicle for
some time in 4x4 mode.
Checking of Oil levels Checking of Oil levelsChecking of Oil levels Checking of Oil levels
Checking of Oil levels
1. Clean the oil level plug and surrounding area.
2 . Remove the oil level plug and check whether oil is dripping out.
3 . If oil is not dripping out, oil level must be below the required
level. Add oil to bring it to the level when it starts dripping out.
4. Tighten oil level plug. Tightening torque of oil level plug is 2 to
3 mkg.
C CC C
C
hanging of hanging of hanging of hanging of
hanging of
T TT T
T
r rr r
r
ansf ansfansf ansf
ansf
er C er Cer C er C
er C
ase Oil ase Oilase Oil ase Oil
ase Oil
1. Clean the oil level plug, drain plug and surrounding area.
2. Place a container to collect oil, under transfer case.
3. Remove the drain plug and let the oil drain out.
4. Remove the oil level plug.
5. Tighten oil drain plug and fill new recommended oil through oil
level plug, till it begins to drip out.
6. Tighten oil level plug. Tightening torque of oil drain plug is 2 to 3 mkg.
1. Transfer case Oil Filler Plug / Level Plug
2. Transfer case Oil Drain Plug
1
2
M A I N T E N A N C E
ProCarManuals.com
Page 112 of 161
112
Checking Oil Level in Front/Rear Axle Checking Oil Level in Front/Rear AxleChecking Oil Level in Front/Rear Axle Checking Oil Level in Front/Rear Axle
Checking Oil Level in Front/Rear Axle
1 . Clean the oil level plug and surrounding area.
2. Remove the oil level plug and check whether oil is dripping
out. Oil level must be below the required level. Add oil to bring
it to the level, when it starts dripping out.
3 . Tighten oil level plug to 2 to 3 mkg. torque.
Changing Oil in Front Axle/Rear Axle Changing Oil in Front Axle/Rear AxleChanging Oil in Front Axle/Rear Axle Changing Oil in Front Axle/Rear Axle
Changing Oil in Front Axle/Rear Axle
1 . Clean the oil level plug, drain plug and surrounding area.
2 . Place a container under Front/Rear axle to collect the oil.
3 . Remove the drain plug and let the oil drain out.
4 . Also remove the oil level plug.
5 . Tighten the oil drain plug and fill new recommended oil through
oil level plug till it begin to drip.
6 . Tighten oil drain and oil level plugs to 2 to 3 mkg. torque.
FRONT AXLE AND REAR AXLE OIL FRONT AXLE AND REAR AXLE OILFRONT AXLE AND REAR AXLE OIL FRONT AXLE AND REAR AXLE OIL
FRONT AXLE AND REAR AXLE OIL
1. Front Axle Oil Filler Plug / Level Plug
2. Front Axle Oil Drain Plug
1
2
M A I N T E N A N C E
ProCarManuals.com
Page 116 of 161
116
POWER STEERING POWER STEERINGPOWER STEERING POWER STEERING
POWER STEERING
Procedure for Oil Filling and Bleeding of Power Procedure for Oil Filling and Bleeding of PowerProcedure for Oil Filling and Bleeding of Power Procedure for Oil Filling and Bleeding of Power
Procedure for Oil Filling and Bleeding of Power
Steering SteeringSteering Steering
Steering (Ensure that Power Steering fluid reservoir is totally
clean before starting the work)
1 . Fill the reservoir nearly full. Crank the engine for 10
seconds without allowing it to start (if possible). If engine
does start, shut the engine immediately. Check & refill
the reservoir repeat atleast three times, each time
checking & refilling the reservoir.
2 . Check for leakage in the system and if noticed take
corrective action.
3 . Start the engine and steer the vehicle from full left to full
right turns 3-4 times.
4 . Add fluid if necessary to maintain the level upto filter top.
NOTICE NOTICENOTICE NOTICE
NOTICE
Do not force the wheel against lock position either
extreme left or right. The power steering pump may get
damaged. Hold it lightly.
5 . When the engine is at steady speed, check for bubble
or foaming in the oil. If present it indicates that air is
getting sucked into the systems. Check the suction
line/fittings and correct if necessary.
6 . Once the system is bled properly and free from foaming
there should not be any appreciable change in oil level
in the reservoir, when the engine is started or stopped
repeatedly.
7 . Now the system is ready for driving.
Final oil level should be at ‘H’ mark on dip stick.
NOTICE NOTICENOTICE NOTICE
NOTICE
* Do not allow fluid level to drop significantly or run out
of the reservoir during the above operation. This may
induce air to the system.
* Do not start the engine without oil in the power steering
system. This will result in serious damage to the
pump. In case of emergency disconnect the pump belt
and then start the engine.
* Always use recommended oil from closed containers.
Any dirty oil poured in the system will result in damage
to pump and gear box.
M A I N T E N A N C E
ProCarManuals.com