TOYOTA 4RUNNER 2022 Owners Manual

5618-2. Customization
8
Vehicle specifications
4RUNNER (U)■
Interior lights (P. 3 6 9 )
*1: For vehicles with a smart key system
*2: If equipped
FunctionDefault settingCustomized
setting
Time elapsed before the
interior lights turn off 15 secondsOff
–OO
7.5 seconds
30 seconds
Operation after the engine
switch is turned to the
“LOCK” position (without a
smart key system) or the
engine switch is turned to
OFF (with a smart key sys-
tem) On Off – – O
Operation when the doors
are unlocked with the
smart key system or wire-
less remote control On Off – – O
Operation when you
approach the vehicle with
the electronic key on your
person
*1
On Off – – O
Operation of the footwell
lights
*2On Off – – O
Lounge illumination con-
trol
*2On Off – – O
123

5628-2. Customization
4RUNNER (U)■
Exterior lights (
P. 223, 251)
*1: If equipped
*2: For vehicles with a smart key system
*3: Except for Canada
FunctionDefault settingCustomized
setting
Daytime running light sys-
tem On Off*3–OO
Time elapsed before the
exterior lights turn off 15 secondsOff
–OO
7.5 seconds
30 seconds
Operation of the outer foot
lights
*1 when you
approach the vehicle with
the electronic key on your
person
*2
On Off – – O
Operation of the outer foot
lights
*1 when the doors
are unlocked with the
power door lock switch On Off – – O
123

5638-2. Customization
8
Vehicle specifications
4RUNNER (U)■
Meters (
P. 9 0 )
*: If equipped
■
Front automatic air conditioning system* ( P. 359)
*: If equipped
FunctionDefault settingCustomized
setting
Sensitivity of the ambient
light sensor used for dim-
ming the meter lights etc.
*
Standard -2 to 2 – – O
Sensitivity of the ambient
light sensor used for
brightening the meter
lights etc.
*
Standard -2 to 2 – – O
123
FunctionDefault settingCustomized setting
Switching between out-
side air and recirculated air
mode linked to automatic
mode button operation Auto Manual – O O
A/C automatic mode but-
ton operation Auto Manual – O O
123

5648-2. Customization
4RUNNER (U)■
Power windows (P. 161)
■Moon roof* (
 P. 169)
*: If equipped
FunctionDefault settingCustomized
setting
Mechanical key linked
operation (close) Off On – – O
Mechanical key linked
operation (open) Off On – – O
Wireless remote control
linked operation (open) Off On – – O
Wireless remote control
linked operation (buzzer) On Off – – O
123
FunctionDefault settingCustomized
setting
Mechanical key linked
operationOffOn – – O
Mechanical key linked
operationOpen and closeOpen only ––O
Close only
Linked operation of com-
ponents when door key is
used
Slide onlyTilt only – – O
Wireless remote control
linked operation (open
only)
OffOn – – O
Linked operation of com-
ponents when wireless
remote control is used
(open only)
Slide onlyTilt only – – O
123

5658-2. Customization
8
Vehicle specifications
4RUNNER (U)■
Rear window wiper and washer (
P. 234)
■Power back window ( P. 1 3 0 )
FunctionDefault settingCustomized
setting
Wiper operates automati-
cally when washer is oper-
ated
OnOff – – O
Drip prevention functionOnOff – – O
Wiper operation interval3 seconds
2 seconds
––O
4 seconds
5 seconds
Time elapsed before the
rear wiper storage func-
tion activates
3 seconds
4 seconds––O
5 seconds
6 seconds
FunctionDefault settingCustomized
setting
Vehicles without a smart
key system: Close opera-
tion linked to door lock
operation using a key
OnOff – – O
Vehicles without a smart
key system: Open opera-
tion linked to door unlock
operation using a key
OnOff – – O
Vehicles with a smart key
system: Close operation
linked to door lock opera-
tion using the switch On Off – – O
Vehicles with a smart key
system: Open operation
linked to door unlock oper-
ation using the switch
OnOff – – O
Vehicles with a smart key
system: Time required to
press and hold the switch
before the window begins
to open/close
0.8 seconds
1 second
––O
1.2 seconds
1.4 seconds
123
123

5668-2. Customization
4RUNNER (U)■
BSM (Blind Spot Monitor)* (P. 2 8 1 )
*: If equipped
■
RCTA (Rear Cross Traffic Alert)* (P. 297)
*: If equipped
■
Toyota parking assist-sensor* (P. 2 8 8 )
*: If equipped
■
Seat belt reminder ( P. 486)
FunctionDefault settingCustomized
setting
BSM OnOff O – –
Outside rear view mirror
indicator brightness BrightDim
O– –
Blank
Sensitivity IntermediateEarly
O– –
Late
Only when in blind spot
FunctionDefault settingCustomized setting
RCTA OnOff O – –
RCTA buzzer volume21 to 3 – – O
123
123
FunctionDefault settingCustomized
setting
Detection distance of the
rear center sensor Far Near – O O
Buzzer volume Level 2 Level 1 to 3 – O O
FunctionDefault settingCustomized setting
Vehicle speed linked seat
belt reminder buzzerOnOff – – O
123
123

5678-2. Customization
8
Vehicle specifications
4RUNNER (U)■
Multi-information display (
P. 92)
*1: The default setting varies according to countries.
*2: Some status screens cannot be registered (indicated on multi-i nformation
display).
FunctionDefault settingCustomized setting
Language*1EnglishFrenchO–OSpanish
Units*1miles (MPG)km (L/100km)O–O
Eco Driving Indicator LightOnOffO–O
switch settingsAfter startDesired status
screen
*2O–O
Pop-up displayOnOffO–O
Rear seat reminder func-
tionOnOffO––
123

5688-2. Customization
4RUNNER (U)■
LDA (Lane Departure Alert) (
P. 260)
■PCS (Pre-Collision System) ( P. 250)
*: The system is automatically enabled each time the engine switc h is turned
to ON.
FunctionCustomized setting
Alert sensitivityHigh, StandardO–O
Vehicle sway warning functionOn, OffO–O
Vehicle sway warning sensitivityHigh, Standard, LowO–O
123
FunctionCustomized setting
PCS (Pre-Collision System)*On, OffO–O
Alert timing
(Far),
(Middle),
(Near)
O–O
123

5698-2. Customization
8
Vehicle specifications
4RUNNER (U)
■In the following situations, customize mode will automatically be turned
off.
● A warning message appears after the customize mode screen is displayed.
● The engine switch is turned to the “LOCK” position (without a smart key sys-
tem) or the engine switch is turned to OFF (with a smart key sy stem).
● The vehicle begins to move while the customize mode screen is displayed.
WARNING
■ During customization
As the engine needs to be running during customization, ensure that the
vehicle is parked in a place with adequate ventilation. In a closed area such
as a garage, exhaust gases including harmful carbon monoxide (CO) may
collect and enter the vehicle. This may lead to death or a seri ous health
hazard.
NOTICE
■ During customization
To prevent battery discharge, ensure that the engine is running while cus-
tomizing features.

570
4RUNNER (U)
8-3. Items to initialize
Items to initialize
The following item must be initialized for normal system opera-
tion after such cases as the battery being reconnected, or main -
tenance being performed on the vehicle:
ItemWhen to initializeReference
Message indicating mainte-
nance is requiredAfter the maintenance is per-
formedP. 412
Tire pressure warning sys-
tem
• When the tire inflation pres- sure is changed such as
when changing traveling
speed or load weight
• When the tire inflation pres-
sure is changed such as
when the tire size is
changed
• When rotating the tires
• After performing the trans- mitter ID code registration
procedure
P. 438