display TOYOTA AVALON 2010 XX30 / 3.G Navigation Manual

BASIC FUNCTIONS
29
In case of having some POIs of the same
name, this screen appears.
“Name sort”: Select this switch to list the
categories in alphabetical order.
“Dist. sort”: Select this switch to list the
categories in order of nearest place from
your current location.
INFORMATION
The information on the desired point
of interest can be displayed on the
map screen.
Select the “Info.” switch to display the
selected destination name, address and
telephone number.

BASIC FUNCTIONS
32
HIGHER EDUCATION
BUSINESS FACILITY
CITY CENTER/NAMED
PLACE
Selecting the “Marked points”switch on the “Destination” screen dis-
plays your list of registered marked
points. (Refer to pages 84 through 88
on “Registering”, “Editing” or “Delet-
ing” marked points.)
When you select the of your desired
item, the screen changes and displays
the map location of the selected des-
tination and the route preference. (See
“Entering destination” on page 39.)
Then, select the
“Enter” switch to start
the route guidance. This new destination
will not be registered as a marked point or
alter the location of the marked point.
There are 3 ways to list the marked point
by selecting switches.
Sort by “Icon”: Select this switch to list
the marked points by using the registered
icon. There are 46 icons and 4 sound
icons. (For details, see page 86.)
Sort by “Date”: Select this switch to list
the marked points in order of registered
date.
Sort by “Name”: Select this switch to list
the marked points in alphabetical order.
Destination input by
MARKED POINTS

BASIC FUNCTIONS
33
Select the “Previous destination”switch on the “Destination” screen.
The screen lists to 20 previously set des-
tinations.
Select your desired destination. The
screen changes and displays the map
location of the selected destination and
the route preference. (See “Entering
destination” on page 39.)
You can delete the list of previous destina-
tions while you stop your vehicle if you no
longer need them. (See page 98 for de-
tails.)By selecting the
“Emergency”switch on the “Destination” screen, the
display changes to a screen to select
police stations, hospitals or dealers.
While driving, only nearby police sta-
tions, hospitals or dealers are shown.
The current position is shown with an
address, the latitude and the longitude
at the top of the screen.
When you select your desired emergency
category,
the selected emergency catego-
ry list is displayed.
The distance from your current position up
to the destination is displayed on the right
of the name.
You can see the names of the emergency
destinations in alphabetical order by se-
lecting the
“Name sort” switch on the
screen.
Select the
of your desired item. The
screen changes and displays the map
location of the selected destination and
the route preference. (See
“Entering
destination” on page 39.)
Destination input by
PREVIOUS DESTINATION
Destination input by
EMERGENCY

BASIC FUNCTIONS
34
Select the “INFO” switch to display the
selected emergency destination name,
address and telephone number.
INFORMATION
In an area which has not been regis-
tered for route guidance, the naviga-
tion does not guide. (See pages 60.)
Select the “Phone #” switch on the
“Destination” screen.
Input a phone number.
After inputting it, select the
“OK” switch,
and the screen changes and displays the
map location of the selected destination
and the road preference. (See “Entering
destination” on page 39.)
If there are many sites having a same num-
ber, the following screen appears.
Destination input by
TELEPHONE NUMBER

BASIC FUNCTIONS
35
Select the “Intersection” switch on
the “Destination” screen.
Input the name of the two intersecting
streets which are located near the des-
tination to be set.
When you select the
“List” switch or the
number of sites becomes 4 or less, the list
of matching street names appears.
Select the of your desired item. Af-
ter inputting the two intersecting
streets, the screen changes and dis-
plays the map location of the selected
destination and the route preference.
(See “Entering destination” on page
39.)
If the same two streets cross at more than
one intersection, the screen changes and
displays the menu to select the city name
where the streets intersect. Select the city
and the map location of the selected des-
tination and the route preference. (See
“Entering destination” on page 39.)
Destination input by
INTERSECTION

BASIC FUNCTIONS
36
To input a freeway entrance or exit, se-
lect the “Freeway Ent./Exit” switch
on the “Destination” screen.
Be sure to use the complete name of the
freeway or highway, including the hyphen,
when entering the destination. Freeways
and interstates use an “I” (I −405). US high-
ways use the state designation before the
number (CA −118).
As the number of matching freeways de-
creases, you can select the
“List” switch
to display the list. When the number of
sites becomes 4 or less, the list screen ap-
pears automatically.
Choose the desired freeway by select-
ing the .
You can then select either a freeway“Entrance” or “Exit”.
Select the of your desired entrance
or exit name. The screen changes and
displays the map location of the se-
lected destination and the route prefer-
ence. (See “Entering destination” on
page 39.)
There are 2 ways to list the freeway en-
trance or exit.
“Dist. sort”: Select this switch to list the
entrances or exits in order of distance from
your current location.
“Name sort”: Select this switch to list the
entrances or exits in alphabetical order.
Destination input by
FREEWAY ENTRANCE or
EXIT

BASIC FUNCTIONS
37
Select the “Previous starting
point” switch on the “Destination”
screen.
The screen changes and displays the
map location of the previous starting
point and the route preference. (See
“Entering destination” on page 39.)
If you have not used the navigation yet,
you can not set the destination by the
“Previous starting point” switch. Select the
“Map” switch on the “Des-
tination” screen.
The screen change and displays the
map location of the last map and the
route preference. (See “Entering des-
tination” on page 39.)
Destination input by
PREVIOUS STARTING
POINT
Destination input by MAP

BASIC FUNCTIONS
38
Select one of the — switches
on the “Destination” screen, the screen
changes and displays the map location
of your desired preset destination. In
this case, it is necessary to register
your desired preset destination before-
hand. (Refer to pages 90 through 91,
“Registering”, “Editing” or “Deleting”
preset destination.)Select the “ (home)” switch on
the destination input screen.
The screen changes and displays the
map location of your home and the
route preference. (See “Entering des-
tination” on page 39.)
The screen changes to display the map
location of your home about 3 seconds,
and then the system starts to search the
way to your home.
If you have not registered your home yet,
you can not set the destination by the
“ (home)” switch.
For the steps to register or delete your
home, see page 49.
Destination input by
PRESET DESTINATIONDestination input by HOME

BASIC FUNCTIONS
39
After you input the destination by one
of the 12 methods, the screen changes
and displays the map location of the se-
lected destination and the route prefer-
ence.
Select the “Map scroll” switch on the
screen to move the cursor .
You can move and set the cursor
at a
desired point. (For the method of how to
move the cursor, see page 18.)
“Change”: Selecting this switch can
change “Route preference”.
When you select the
“Enter” switch, the
system starts searching for a route to your
destination using the conditions entered.
If you want to set a preferred road point be-
tween the starting point and the destina-
tion or change the search condition, push
the
“ENTER” button on the navigation
controller to display the menu switches.
Select the “Edit route” switch on the
screen. The screen changes and displays
the edit route menu. (For details, see page
99.)
You can start the route guidance by select-
ing the
“Start” switch on the screen or
starting to move your vehicle.
If you continue to push the
“ENTER”button on the navigation controller until
you hear a beep, the “demo” mode will
start.
Entering destination

BASIC FUNCTIONS
40
Route preference:
To change the conditions of the route
preference.
Select the
“Edit route” switch, and
the “Edit route” screen appears.
Select the “Route preference”switch.
Select either “Allow” or “Detour”switch. When you select the “OK”switch, the system starts searching for
a route up to the destination.
Even if you select the
“Detour”switch, it cannot be avoid in some
cases.
INFORMATION
If the calculated route includes a trip
by ferry, the route guidance shows a
sea route. After you travel by ferry,
the current vehicle position may be
incorrect. Upon reception of GPS sig-
nals, it is automatically corrected.
Select the “3routes” switch.
“3routes”: You can choose your route out
of 3 types of route.
Choose one from the three routes.
“Quick”: A route on which you can reach
the destination in the shortest time.
“Short”: A route on which you can reach
the destination in the shortest distance.
“Alternative”: Other route.
Select the “Time & distance”switch to display the time and distance
list.