fog light TOYOTA AYGO 2011 Owners Manual

ix
Table of contents
1 OPERATION OF INSTRUMENTS AND CONTROLSPage
1 Overview of instruments and controls1 .......................
2 Keys and Doors9 .......................................
3 Occupant restraint systems41 .............................
4 Steering wheel and Mirrors111 .............................
5 Lights, Wipers and Defogger11 5 ............................
6 Gauges, Meters and Service reminder indicators123 ............
7 Engine (ignition) switch, Transmission and Parking brake137 .....
8 Audio system161 ........................................
9 Air conditioning system175 ................................
10 Other equipment187 .....................................
2 INFORMATION BEFORE DRIVING YOUR TOYOTA 193........
3 STARTING AND DRIVING 209...............................
4 IN CASE OF AN EMERGENCY 219..........................
5 CORROSION PREVENTION AND APPEARANCE CARE 245...
6 MAINTENANCE REQUIREMENTS 253.......................
7DO−IT−YOURSELF MAINTENANCE
1 Introduction257 .........................................
2 Engine and Chassis263 ..................................
3 Electrical components277 .................................
8 SPECIFICATIONS 291......................................
9 INDEX 303................................................
AYGO WE 99E37E11 02.22

OVERVIEW OF INSTRUMENTS AND CONTROLS3
MS11002a
1. Headlight, turn signal and rear fog
light switches
2. Wiper and washer switches
3. Rear window defogger switch
4. Audio system
5. Emergency flasher switch
6. Air conditioning switch
7. Air conditioning controls8. Power outlet
9. Engine switch
10. Tilt steering lock release lever
11. Airbag manual on−off switch
12. Hood lock release lever
13. Headlight beam level control switch
AYGO WE 99E37E11 02.18

OVERVIEW OF INSTRUMENTS AND CONTROLS5
MS11004a
1. Rear window defogger switch
2. Emergency flasher switch
3. Audio system
4. Air conditioning switch
5. Headlight, turn signal and rear fog
light switches
6. Wiper and washer switches7. Headlight beam level control switch
8. Airbag manual on−off switch
9. Engine switch
10. Tilt steering lock release lever
11. Power outlet
12. Air conditioning controls
AYGO WE 99E37E11 02.18

8OVERVIEW OF INSTRUMENTS AND CONTROLS
Engine preheating indicator light
Electric power steering system warning light∗
Turn signal indicator lights
Headlight high beam indicator light
Headlight low beam indicator light
Rear fog light indicator light
Slip indicator light
∗: For details, see “Service reminder indicators and warning
buzzers” on page 127 in Section 1−6.
AYGO WE 99E37E11 02.18

LIGHTS, WIPERS AND DEFOGGER11 5
Section 1−5
OPERATION OF INSTRUMENTS AND
CONTROLS
Lights, Wipers and Defogger
DHeadlights and turn signals 116.............................
DHeadlight beam level control 117............................
DEmergency flashers 118....................................
DRear fog light 119..........................................
DInterior light 119...........................................
DWindshield wiper and washer 120...........................
DRear window wiper and washer 120.........................
DRear window defogger 121.................................
AYGO WE 99E37E11 02.18

11 6LIGHTS, WIPERS AND DEFOGGER
Headlights and turn signals
MS14001b
HEADLIGHTS
To turn on the following lights: Twist
the headlight/turn signal lever knob.
Position 1—Position, tail, license plate and
instrument panel lights
Position 2—Headlights and all of the
above
However, on some models, all the lights
above also turn on when the engine is
started with the headlight switch off.
The headlight low beam indicator light
(green light) on the instrument cluster will
tell you that the low beams are on.
Adjust the headlight beam level before
turning on the headlights. (See “Headlight
beam level control” on page 117.)
Light reminder buzzer
A buzzer will remind you to turn the lights
off when the driver ’s door is opened if the
engine switch is turned to the “LOCK”
position with the headlights switch on.
NOTICE
To prevent the battery from being dis-
charged, do not leave the lights on
for a long period when the engine is
not running.
MS14002b
High−Low beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
The headlight low beam indicator light
(green light) on the instrument cluster will
tell you that the low beams are on.
The headlight high beam indicator light
(blue light) on the instrument cluster will
tell you that the high beams are on.
Flashing the high beam headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
You can flash the high beam headlights
with the knob turned to “OFF”.
AYGO WE 99E37E11 02.18

LIGHTS, WIPERS AND DEFOGGER11 7
MS14003b
TURN SIGNALS
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The engine switch must be in the “ON”
position.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
If the turn signal indicator lights (green
lights) on the instrument cluster flash fast-
er than normal, a front or rear turn signal
bulb has burned out.
Headlight beam level control
MS14004a
To adjust the headlight beam level, turn
the switch.
The following list shows examples of prop-
er switch settings. For loading conditions
other than those listed, adjust the dial
position so that the beam level is the
same as the one obtained according to
the list when only the driver is in the
vehicle. The higher the number of the dial
position, the lower the headlight beam lev-
el.
CAUTION
Always keep the headlight beam at
the proper level, or your headlights
may dazzle other road users, causing
unexpected accidents.
AYGO WE 99E37E11 02.18

11 8LIGHTS, WIPERS AND DEFOGGER
"Vehicle category M1
∗
Loading condition
Indication
figure of
control switch
Driver only or
Driver + one
passenger in the front
seat.
0
All passengers.1
All passengers and
Full luggage loading
to the luggage room.
2
Driver and
Full−luggage loading
to the luggage room.
3
"Vehicle category N1∗
Loading condition
Indication
figure of
control switch
Driver only0
Driver and
Full−luggage loading
to the luggage room
2
∗: To distinguish the vehicle category, ask
any authorized Toyota dealer or repair-
er, or another duly qualified and
equipped professional.
Emergency flashers
MS14005a
To turn on the emergency flashers,
push the switch.
All the turn signal lights will flash. To turn
them off, push the switch once again.
Turn on the emergency flashers to warn
other drivers if your vehicle must be
stopped where it might be a traffic hazard.
Always pull as far off the road as pos-
sible.
The turn signal light switch will not work
when the emergency flashers are operat-
ing.
NOTICE
To prevent the battery from being dis-
charged, do not leave the switch on
longer than necessary when the en-
gine is not running.
AYGO WE 99E37E11 02.18

LIGHTS, WIPERS AND DEFOGGER11 9
Rear fog light
MS14006a
To turn on the rear fog light, twist the
band of the headlight and turn signal
switch lever to the position of the rear
fog light. They will come on when the
headlights are on.
The rear fog light indicator on the instru-
ment cluster will light up when the rear
fog light is turned on.
The rear fog light will go off automatically
when all other lights are turned off.
After the headlight switch is turned off,
the rear fog light does not come on even
if you turn on the headlight switch again.
To turn on the rear fog light, twist the
band of the headlight and turn the signal
switch lever to the position of the rear fog
light again under the condition stated
above.
Interior light
MS14007
To turn on the interior light, slide the
switch.
The interior light switch has the following
positions:
“
” (ON)—Keeps the light on all the
time.
“
” (OFF)—Turns the light off.
“
” (DOOR)—Turns the light on when
the driver ’s door is opened.
AYGO WE 99E37E11 02.18

120LIGHTS, WIPERS AND DEFOGGER
Windshield wiper and washer
MS14008a
To turn on the windshield wiper, move
the lever to the desired setting.
The engine switch must be in the “ON”
position.
Lever position
Speed setting
Position 1Intermittent
Position 2Slow
Position 3Fast
For a single sweep of the windshield,
push the lever up and release it.
To squirt washer fluid, pull the lever
toward you.
For instructions on adding washer fluid,
see “Adding washer fluid” on page 282 in
Section 7−3.
In freezing weather, warm the windshield
with the defroster before using the washer.
This will help prevent the washer fluid
from freezing on your windshield, which
could block your vision.
NOTICE
Do not operate the wiper if the wind-
shield is dry. It may scratch the
glass.
MS14009a
To turn on the rear window wiper, twist
the lever knob upward. (Position 1)
The engine switch must be in the “ON”
position.
To squirt washer fluid on the rear window,
twist the knob upward or downward as far
as it will go (position 2 or 3). The knob
automatically returns from these positions
after you release it.
For instructions on adding washer fluid,
see “Adding washer fluid” on page 282 in
Section 7−3.
NOTICE
Do not operate the rear wiper if the
rear window is dry. It may scratch the
glass.
AYGO WE 99E37E11 02.18
Rear window wiper and
washer