TOYOTA AYGO 2014 Owners Manual (in English)

211 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99G80E
CAUTION
Caution while driving
Do not connect portable player or operate the controls.
Caution regarding interference with electronic devices
Your audio unit is fitted with Bluetooth
® antennas. People with implanted
pacemakers or cardiac defibrillators should maintain a reasonable dis-
tance between themselves and the Bluetooth
® antennas. The radio waves
may affect the operation of such devices.
Before using Bluetooth
® devices, users of any electrical medical device
other than implanted pacemakers and implanted cardiac defibrillators
should consult the manufacturer of the device for information about its
operation under the influence of radio waves. Radio waves could have
unexpected effects on the operation of such medical devices.
NOTICE
To prevent damage
Do not leave the portable player in the vehicle. The temperature inside the
vehicle may become high, resulting in damage to the telephone.

212
3-3. Using the audio system (Type B)
AYGO_WE_99G80E
Using the telephone
: If equipped
Bluetooth® audio streaming
P. 209
Bluetooth
® hands-free phone system
The hands-free system is a function that allows you to use your
telephone without touching it.
This system supports Bluetooth
®. Bluetooth® is a wireless data
system that allows the telephone to wirelessly connect to the
hands-free system and make/receive calls.
Vo lu m eDisplaying the main menu
Power on/off
Accept an incoming call
Halt current operation

213 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99G80E
Pairing a telephone/first connection
Activate the telephone’s Bluetooth
® function and ensure that it
is set as visible to all (refer to the telephone instructions).
Press the “MENU” button.
Press (Bluetooth).
Press (Search).
A window is displayed with “Searching device”.
Select the telephone to be paired from the list and press
(OK).
Only one telephone can be paired at a time.
In some cases, the Bluetooth
® address of the telephone may
appear instead of the name of the telephone.
A virtual keypad is displayed on the screen: choose a 4 digit
code then press (OK).
A message is displayed on the screen of the telephone: enter
the same code and confirm.
If pairing fails, try again; the number of attempts is unlimited.
Accept the connection to the telephone.
A message appears in the screen to confirm the result of the
connection.
Pairing can also be initiated from the telephone by searching for
detected Bluetooth® devices.
The directory and the call list can be accessed after the synchroni-
zation period (if the telephone is compatible).
Automatic connection must be configured in the telephone to allow
a connection each time the vehicle is started.

214 3-3. Using the audio system (Type B)
AYGO_WE_99G80E
Managing connections
Press the “MENU” button.
Press (Bluetooth).
Press (BT management) and confirm. The list of paired
telephones is displayed.
: Indicates connection of the audio profile.
: Indicates connection of the hands-free profile.
Press ( or ) to select a telephone and press
(OK).
Select one of to select.
“Tel.”: Hands-free connection
“Audio”: Play audio files
“Delete”: Delete the pairing
Making a call – recently called numbers*
Press and hold the “SRC/ ” button to display the call list.
For access to the calls list, it is also possible in the following way:
“MENU”“Telephone”“Call”“Calls list”
Press ( or ) to select “Missed calls”, “Dialed calls” or
“Answered calls”.
Press ( or ) to select the desired number.
Press “ ” or “ ” on the “SEEK” button to select the next or pre-
vious page in the call list.
Press (OK) to start the call.
The call list includes the calls sent from and received by the vehicle
via the connected telephone. It is possible to make a call directly
from the telephone; however stop the vehicle in a safe area as a
safety measure.
*: Depending on the compatibility of the telephone

215 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99G80E
Making a call – from the directory*
Press the “MENU” button.
Press (Telephone).
Press (Call).
Press (Directory) to display the directory list.
Press ( or ) to select the desired number.
Press “ ” or “ ” on the “SEEK” button to select the next or pre-
vious page in the directory list.
Press (OK) to start the call.
*: Depending on the compatibility of the telephone
Receiving a call
An incoming call is announced by a ring and a display on the
screen.
Press (YES) to accept the call, or (NO) to reject
the call.
Press the “SRC/ ” button also accepts an incoming call.
Press and hold the “ESC” button or the “SRC/ ” button also
rejects an incoming call.

216 3-3. Using the audio system (Type B)
AYGO_WE_99G80E
Managing calls
Hang up
In the contextual menu:
Press ( ) to end the call.
Press and hold the “SRC/ ” button also ends the call.
Secret – mute (so that the caller cannot hear)
In the contextual menu:
Press ( ) to switch off the microphone.
Press ( ) to switch on the microphone.
Combined mode (to leave the vehicle without ending the call)
In the contextual menu:
Press ( ) to transfer the call to the telephone.
Press ( ) to transfer the call to the vehicle.
In certain cases, the combined mode has to activated from the tele-
phone.
The Bluetooth
® connection will be restored automatically if the ignition
has been switched off, then on again (depending on the compatibility of
the telephone).

217 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99G80E
Pairing a telephone
The services offered depend on the network, the SIM card and the com-
patibility of the Bluetooth® telephone used. Consult your telephone’s
manual and your operator to find out which services are available to you.
For safety reasons and because they require prolonged attention on the
part of the driver, the operations for pairing of the Bluetooth
® mobile tele-
phone with the Bluetooth® hands-free system of your audio system must
be carried out with the vehicle stationary and the ignition on.
Visit www.toyota-europe.com for more information (compatibility, more
help, ...).
It is not possible to pair more that 5 telephones. If 5 telephones are
already paired, a registered telephone needs to be deleted. (P. 214)
Pairing can also be initiated from the telephone by searching for detected
Bluetooth
® devices.
The directory and the calls list can be accessed after the synchronization
period (if the telephone is compatible). Automatic connection must be
configured in the telephone to allow the connection each time the vehicle
is started.
The telephone connection automatically includes hands-free operation
and audio streaming.
About Bluetooth
®
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.

218 3-3. Using the audio system (Type B)
AYGO_WE_99G80E
Certification

219 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99G80E
CAUTION
Caution while driving
Do not use a cellular phone, or connect the Bluetooth
® phone.
Caution regarding interference with electronic devices
Your audio unit is fitted with Bluetooth
® antennas. People with implanted
pacemakers or cardiac defibrillators should maintain a reasonable dis-
tance between themselves and the Bluetooth
® antennas. The radio waves
may affect the operation of such devices.
Before using Bluetooth
® devices, users of any electrical medical device
other than implanted pacemakers and implanted cardiac defibrillators
should consult the manufacturer of the device for information about its
operation under the influence of radio waves. Radio waves could have
unexpected effects on the operation of such medical devices.
NOTICE
To prevent damage to a cellular phone
Do not leave a cellular phone in the vehicle. The temperature inside may
become high resulting in damage to the phone.

220
3-3. Using the audio system (Type B)
AYGO_WE_99G80E
Audio settings
Adjusting equalizer
Press the button repeatedly until equalizer mode is dis-
played.
Press (< or >) to select type of equalizer (classical,
jazz, rock etc.).
When selected “User”, adjust the bass and treble audio level manu-
ally by pressing (+ or -).
The audio settings are different and independent for each sound
source.
Adjusting sound distribution
Press the button repeatedly until sound distribution mode
is displayed.
Press (+ or -) to adjust the left/right balance.
: If equipped
Press the button to display the audio settings menu.
The distribution, or spatialization of sound, is an audio process
which allows the sound quality to be improved according to the set-
ting chosen, corresponding to the position of the listeners in the
vehicle.
The audio settings menu
changes each time the
button is pressed.
The settings available are:
• Equalizer (bass and treble)
• Sound distribution (left/right
balance)
• Loudness function