codes TOYOTA CAMRY 2000 Service Owner's Manual

110BODY ELECTRICALÐACCESSORIES
Panic Alarm Operation
When the ªpanicº switch of the transmitter is pushed, the theft deterrent system sounds the horns and flaashes the
headlights and taillights. To stop the alarm of the theft deterrent system that was triggered through this operation, push
the transmitter's ªunlockº switch or ªpanicº switch again.
Operation Verification Light Function
When the doors are locked by the transmitter switch
operation, the parking light and taillight flashes
once to confirm that the operation has been
completed.
Similarly, the parking light and taillight flashes
twice when the doors are unlocked.
Light Flash Patterns
Transmitter Recognition code Registration Function
As in the '96 Avalon, the recognition code for each transmitter is registered in an EEPROM contained in the wieless
door lock ECU. Up to 2 different recognition codes can be resistered in teh EEPROM. The procedure for registering
a registration code is the same as that used in the '96 Avalon.
For details of the rrecogition code registration procedure, refer to the 1997 Camry Repair Manual (Pub. No.
RM503U).

118BODY ELECTRICALÐACCESSORIES

Power Indicator Light Blinking Pattern
*: ªAº and ªBº Indicate the Malfunction Categories.
b. Diagnostic Trouble Code Indication
The diagnostic trouble codes have been modified in the new model. For details of inspection, diagnostic trouble codes
and repair procedures, see 1997 Camry Repair Manual (Pub. No. RM 503U).

120APPENDIX
MAJOR TECHNICAL SPECIFICATIONS
Item AreaU.S.A..
.Body Type4±Door SedanVehicle GradeCELEXLEModel CodeSXV20L±CEMDKASXV20L±CEPDKASXV20L±A(C)EPNKASXV20L±A(C)EPGKALength mm (in.)4785(188.4)uuu
OverallWidth mm (in.)1780(70.1)uuuOverallHeight* mm (in.)1415 (55.7)uuuWheel Base mm (in.)2670(105.1)uuu
TreadFront mm (in.)1545 (60.8)uuuTreadRear mm (in.)1520 (59.8)uuu
Effective Head RoomFront mm (in.)1105 (43.5)uuuEffective Head RoomRear mm (in.)902 (35.5)uuu
sEffective Leg RoomFront mm (in.)980 (38.6)uuu
ghtsEffective Leg RoomRear mm (in.)940 (37.0)uuu
Weig
h
Shoulder RoomFront mm (in.)1427 (56.2)uuu
icle WShoulder RoomRear mm (in.)1425 (56.1)uuu
VehicOverhangFront mm (in.)970 (38.2)uuu
s & VeOverhangRear mm (in.)1140 (44.9)uuu
sions
&Min.. Running Ground Clearance mm (in.)145 (5.7)uuu
mensioAngle of Approach degrees175uuu
DimeAngle of Departure degrees175uuu
ajor DFront kg (lb)820 (1808)840 (11852)860 (1896)*1, 865 (1970)*2865 (1907)*1, 870 (1918)*2
MajoCurb WeightRear kg (lb)530 (1168)u530 (1168)*1, 535 (1179)*2
530 (1168)*1, 535 (1179)*2
MCurb WeightTotal kg (lb)1350 (2976)1370 (3020)1390 (3064)*1, 1400 (3086)*2
1395 (3075)*1, 1405 (3097)*2
Front kg (lb)980 (2161)uuuGross Vehicle WeightRear kg (lb)870 (1918)uuuGross Vehicle WeightTotal kg (lb)1850 (4079)uuuFuel Tank Capacityl (U.S. gal., Imp. gal.)70 (18.5, 15.4)uuuLuggage Compartment Capacity m3 (cu. ft.)0.399 (14.1)uuuMax. Speed km/h (mph)180 (112)uuuMax. Cruising Speed km/h (mph)ÐÐÐÐ
Acceleration0 to 100 km/h sec.ÐÐÐÐ
ceAcceleration0 to 400 m sec.ÐÐÐÐ
mance1st Gear km/h (mph)52 (32)69 (43)uu
rform
a
Max Permissible Speed2nd Gear km/h (mph)93 (58)125 (78)uuPerfoMax. Permissible Speed3rd Gear km/h (mph)147 (91)ÐÐÐP4the Gear km/h (mph)ÐÐÐÐTurning DiameterWall to Wall m (ft.)11.5 (37.7)uuuTurning Diameter(Outside Front)Curb to Curb m (ft.)11.0 (36.1)uuuEngine Type5S±FEuuuValve Mechanism16±Valve, DOHCuuuBore x Stroke mm (in.)87.0x91.0(3.43x3.58)uuu
eDisplacement cm3 (cu. in..)2164 (132.0)uuu
ngineCompression Ratio9.5 : 1uuuEngCarburetor TypeSFIuuuResearch Octane No. RON91uuuMax. Output (SAE±NET) kW/rpm (HP @ rpm)99/5200(133@5200),97/5200(130@5200)*3uuuMax. Torque (SAE±NET) N.m/rpm (lb±ft @ rpm)199/4400(147@4400,197/4400(145@44003uuu
alBattery Capacity (5HR) Voltage & Amp. hr.12±52, 12±48*4uuu
ginectric a lGenerator Output Watts960uuuEnginElectrStarter Output kW1.4uuuClutch TypeDry, Single PlateÐÐÐTransmission TypeS51A140Euu
uIn First3.5382.810uuIn Second1.9601.549uu
Transmission Gear RatioIn Third1.2501.000uuTransmission Gear RatioIn Fourth0.9450.706uuIn Fifth0.731ÐÐÐIn Reverse3.1532.296uuCounter Gear RatioÐ0.945uuDifferential Gear Ratio (Final)3.944uuu
ssisBrake TypeFrontVentilated Discuuu
ChassiBrake TypeRearL.T. DrumuuuChParking Brake TypeDrumuuuBrake Booster Type and Style in.Tandem 8º + 9ºuTandem 8.5º + 8.5º*1,
8º
+
9º*2uProportioning Valve TypeDual±P Valveuuu
Suspension TypeFrontMacPherson StrutuuuSuspension TypeRearMacPherson Strutuuu
Stabilizer BarFrontSTDuuuStabilizer BarRearSTDuuuSteering Gear TypeRack & PinionuuuSteering Gear Ratio (Overall)17.4 : 1uuuPower Steering TypeIntegral Typeuuu
* : Unladen Vehicle, *1 : Produced by TCM, *2 : Produced by TMM, *3 : California Specification Model, *4
: Without Cold Area Specification Model

122APPENDIX
Item AreaCanadaBody Type4±Door SedanVehicle GradeLECELEModel CodeSXV20L±CEPNKKMCV20L±CEPDKKMCV20L±CEPNKKLength mm (in.)4785 (188.4)uu
OverallWidth mm (in.)1780 (70.1)uuOverallHeight* mm (in.)1415 (55.7)1420 (55.9)uWheel Base mm (in.)2670 (105.1)uu
TreadFront mm (in.)1545 (60.8)uuTreadRear mm (in.)1520 (59.8)uu
Effective Head RoomFront mm (in.)1105 (43.5)uuEffective Head RoomRear mm (in.)902 (35.5)uu
sEffective Leg RoomFront mm (in.)980 (38.6)uu
ghtsEffective Leg RoomRear mm (in.)940 (37.0)uu
Weig
h
Shoulder RoomFront mm (in.)1427 (56.2)uu
icle WShoulder RoomRear mm (in.)1425 (56.1)uu
VehicOverhangFront mm (in.)970 (38.2)uu
s & VeOverhangRear mm (in.)1140 (44.9)uu
sions
&Min.. Running Ground Clearance mm (in.)145 (5.7)148 (5.8)u
mensioAngle of Approach degrees175uu
DimeAngle of Departure degrees175uu
ajor DFront kg (lb)865 (1907)890 (1962)920 (2028)MajoCurb WeightRear kg (lb)535 (1179)540 (1191)uMCurb WeightTotal kg (lb)1400 (3086)1430 (3153)1460 (3219)Front kg (lb)980 (2161)1035 (2282)uGross Vehicle WeightRear kg (lb)870 (1918)875 (1929)uGross Vehicle WeightTotal kg (lb)1850 (4079)1910 (4211)uFuel Tank Capacityl (U.S. gal., Imp. gal.)70 (18.5, 15.4)uuLuggage Compartment Capacity m3 (cu. ft.)0.399 (14.1)uuMax. Speed km/h (mph)180 (112)210 (130)uMax. Cruising Speed km/h (mph)ÐÐu
Acceleration0 to 100 km/h sec.ÐÐÐ
ceAcceleration0 to 400 m sec.ÐÐÐ
mance1st Gear km/h (mph)69 (43)70 (43)u
rform
a
Max Permissible Speed2nd Gear km/h (mph)125 (78)127 (79)uPerfoMax. Permissible Speed3rd Gear km/h (mph)ÐÐÐP4th Gear km/h (mph)ÐÐÐTurning DiameterWall to Wall m (ft.)11.5 (37.7)11.9 (39.0)uTurning Diameter(Outside Front)Curb to Curb m (ft.)11.0 (36.1)11.4 (37.4)uEngine Type5S±FE1MZ±FEuValve Mechanism16±Valve, DOHC24±Valve, DOHCuBore x Stroke mm (in.)87.0x91.0 (3.43x3.58)87.5x83.0 (3.44x3.27)u
eDisplacement cm3 (cu. in..)2164 (132.0)2995 (182.7)u
ngineCompression Ratio9.5 : 110.5:1uEngCarburetor TypeSFIuuResearch Octane No. RON9191 or higheruMax. Output (SAE±NET) kW/rpm (HP @ rpm)99/5200(133@5200)145/5200 (194@5200)uMax. Torque (SAE±NET) N.m/rpm (lb±ft @ rpm)199/4400(147@4400)283/4400 (209@4400)u
alBattery Capacity (5HR) Voltage & Amp. hr.12±52uu
ginectric a lGenerator Output Watts960uuEnginElectrStarter Output kW1.4uuClutch TypeÐÐÐTransmission TypeA140EA541EuIn First2.810uuIn Second1.549uu
Transmission Gear RatioIn Third1.000uuTransmission Gear RatioIn Fourth0.7060.375uIn FifthÐÐÐIn Reverse2.296uuCounter Gear Ratio0.945uuDifferential Gear Ratio (Final)3.9443.933u
ssisBrake TypeFrontVentilated Discuu
ChassiBrake TypeRearL.T. DrumSolid DiscuChParking Brake TypeDrumuuBrake Booster Type and Style in.Tandem 8º + 9ºuuProportioning Valve TypeDual±P Valveuu
Suspension TypeFrontMacPherson StrutuuSuspension TypeRearMacPherson Strutuu
Stabilizer BarFrontSTDuuStabilizer BarRearSTDuuSteering Gear TypeRack & PinionuuSteering Gear Ratio (Overall)17.4 : 1uuPower Steering TypeIntegral Typeuu
* : Unladen Vehicle

CodeMaterial
nameHeat*
resistant
temperature
limit °C (°F)Resistance to
alcohol or gasolineNotes
AASAcrylonitrile
Acrylic Styrene80
(176)Alcohol is harmless if applied
only for short time in small
amounts (e.g., quick wiping to
remove grease.)Avoid gasoline and
organic or aromatic
solvents.
ABSAcrylonitrile
Butadiene Styrene80
(176)Alcohol is harmless if applied
only for short time in small
amounts (e.g., quick wiping to
remove grease).Avoid gasoline and
organic or aromatic
solvents.
AESAcrylonitrile
Ethylene Styrene80
(176)Alcohol is harmless if applied
only for short time in small
amounts (e.g., quick wiping to
remove grease.)Avoid gasoline and
organic or aromatic
solvents.
ASAAcrylonitrile
Styrene
Acrylate80
(176)Alcohol is harmless if applied
only for short time in small
amounts (e.g., quick wiping to
remove grease.)Avoid gasoline and
organic or aromatic
solvents.
CABCellulose
Acetate80
(176)Alcohol is harmless if applied
only for short time in small
amounts (e.g., quick wiping to
remove grease.)Avoid gasoline and
organic or aromatic
solvents.
EPDMEthylene
Propylene100
(212)Alcohol is harmless.
Gasoline is harmless if applied
only for short time in small
amounts.Most solvents are
harmless but avoid
dipping in gasoline,
solvents, etc.
FRPFiber
Reinforced
Plastics180
(356)Alcohol and gasoline are
harmless.Avoid alkali.
EVAEthylene
Acetate70
(158)Alcohol is harmless if applied
only for short time in small
amounts (e.g., quick wiping to
remove grease.)Avoid gasoline and
organic oraromatic
solvents.
PAPolyamide
(Nylon)80
(176)Alcohol and gasoline are
harmless.Avoid battery acid.
PBTPolybutylene
Terephthalate160
(320)Alcohol anal gasoline are
harmless.Most solvents are
harmless.
PC Polycarbonate120
(248)Alcohol is harmless.Avoid gasoline brake
fluid, wax, wax removers
and organic solvents.
Avoid alkali.
HANDLING PRECAUTIONS
1. The repair procedure for plastic body parts must conform with the type of plastic material.
2. Plastic body parts are identified by the codes in the following chart.
3. When repairing metal body parts adjoining plastic body parts (by brazing, frame cutting, welding,
painting etc.), consideration must given to the property of the plastic.
*Temperatures higher than those listed here may result in material deformation during repair.
PLASTIC BODY PARTSPP-2

CAMRY ± NEW FEATURES
150NF118
BatteryIgnition Switch
EFI
Relay
Transponder
Key Coil
Transponder
Key AmplifierECMBody
ECU
DLC1
150NF119
Transponder Chip
24
3. Wiring Diagram
4. Construction
The engine immobiliser system consists of the transponder key (ignition key), transponder key coil, trans-
ponder key amplifier, and ECM.
Transponder Key (Ignition Key)
A transponder chip is embedded in the grip of the
ignition key. Each transponder chip contains an
individual transponder key-code (ID code). The
key does not need an internal battery to transmit
a key code.
Transponder Key Coil and Transponder Key Amplifier
The transponder key coil is a ring-shaped coil installed around the ignition key cylinder. The transponder
key amplifier is installed in the back of the key cylinder.
An electrical power circuit to provide power to the transponder key coil has been enclosed in the amplifier.
ECM
The control circuit of the engine immobiliser system has been integrated inside the ECM. As a result, the
time has been reduced taken for the engine to start in case of mismatching key code thus improving the
system's theft deterrent performance.
A maximum of 10 different transponder key codes (master key: 7 types, sub key: 3 types) can be registered
in the ECM.

CAMRY ± NEW FEATURES
150NF120
Ignition KeyElectromagnetic
Energy
Transponder
ChipKey-Code
SignalTransponder Key
AmplifierECM
150NF121
Key-Code
SignalKey-Code
Transponder
Key AmplifierKey-CodeCode Memory Circuit
Code
Comparison
Circuit
ECMSpark Plug
Injector25
5. Operation
Setting the Engine Immobiliser System
When the ignition key is removed from the key cylinder, the engine immobiliser system will be set.
Unsetting the Engine Immobiliser System
1
When the ignition key is inserted in the key cylinder, the ECM instructs the transponder key coil to sup-
ply the electromagnetic energy that enables the transponder chip to transmit a key-code signal. The
transponder chip then uses this electrical energy to transmit a key-code signal.
2
The key-code signal that has been received at the coil is amplified by the transponder key amplifier and
sent to the ECM. The key-code that has been received by the ECM is then compared to the key-code
that is stored in the ECM. The code comparison process takes place and if the codes match in a row,
the ECM unsets the immobiliser system. As a result, the engine will be able to start.

CAMRY ± NEW FEATURES 26
6. Functions
The engine immobiliser system provides the following functions:
Immobiliser Cancel Function
The immobiliser system is cancelled when the following condition is met, thus permitting authorized opera-
tion of the engine:
The ignition key has been inserted in the key cylinder (after the ECM reads the key code of the transpond-
er chip and that code matches the pre-registered key code).
New Transponder Key Code Registration Function
This function allows the registration of the key code of two master keys and a sub key to the new ECM. This
function is used if the ECM is replaced with a new one.
Additional Transponder Key Code Registration Function
This function enables the registration of the key code for a new master key or sub key, while retaining the
key codes that are already registered. This function is used for the purpose of adding a new master or sub
key. A maximum of 10 different transponder key codes (7 for master keys and 3 for sub keys) can be regis-
tered in the ECM.
Transponder Key Code Delete Function
This function deletes all the transponder key codes that are registered in the ECM except for the key code
of the master key that was used to execute the delete function.
For further details on transponder key code registration, addition, and deletion, see the 1998 Camry Repair
Manual (Pub. No. RM589U).
Appendix

B
[A]: System Title
[B]: Indicates a Relay Block. No shading is used and
only the Relay Block No. is shown to distinguish it
from the J/B
Example : Indicates Relay Block No.1
[C]: ( ) is used to indicate different wiring and
connector, etc. when the vehicle model, engine
type, or specification is different.
[D]: Indicates related system.
[E]: Indicates the wiring harness and wiring harness
connector. The wiring harness with male terminal is
shown with arrows (
).
Outside numerals are pin numbers.
Female Male ( )
The first letter of the code for each wiring harness
and wiring harness connector(s) indicates the
component's location, e.g, ºEº for the Engine
Compartment, ºIº for the Instrument Panel and
Surrounding area, and ºBº for the Body and
Surrounding area.
When more than one code has the first and second
letters in common, followed by numbers (e.g, IH1,
IH2), this indicates the same type of wiring harness
and wiring harness connector.
[F]: Represents a part (all parts are shown in sky blue).
The code is the same as the code used in parts
position.
[G]: Junction Block (The number in the circle is the J/B
No. and the connector code is shown beside it).
Junction Blocks are shaded to clearly separate
them from other parts.
3C indicates
that it is inside
Junction Block
No.3 Example:

[H]: When 2 parts both use one connector in common,
the parts connector name used in the wire routing
section is shown in square brackets [ ].[I]: Indicates the wiring color.
Wire colors are indicated by an alphabetical code.
B = Black W = White BR = Brown
L = Blue V = Violet SB = Sky Blue
R = Red O = Orange LG = Light Green
P = Pink Y = Yellow GR = Gray
G = Green
The first letter indicates the basic wire color and the
second letter indicates the color of the stripe.
Example: L ± Y
L
(Blue)Y
(Yellow)
[J]: Indicates a wiring Splice Point (Codes are ºEº for the
Engine Room, ºIº for the Instrument Panel, and ºBº
for the Body).
The Location of splice Point I 5 is indicated by the
shaded section.
[K]: Indicates a shielded cable.
[L]: Indicates the pin number of the connector.
The numbering system is different for female and
male connectors.
Example :
Numbered in order
from upper left to
lower rightNumbered in order
from upper right to
lower left
Female Male
[M]: Indicates a ground point.
The first letter of the code for each ground point(s)
indicates the component's location, e.g, ºEº for the
Engine Compartment, ºIº for the Instrument Panel
and Surrounding area, and ºBº for the Body and
Surrounding area.
[N]: Page No.

H17GRAY
12X 4
2 1
X7 8
X11 X

X
3


61

2

13



X 4






X
3


6 C7 L4 R6 R7 S6
[X] [O]
[P]
[Q]
[R]
[S]
[T]
[U]
[V]
[W]
B HOW TO USE THIS MANUAL
Current is applied at all times through the STOP fuse to TERMINAL 2 of the stop light SW.
When the ignition SW is turned on, current flows from the GAUGE fuse to TERMINAL 8 of the light failure sensor, and also flows
through the rear lights warning light to TERMINAL 4 of the light failure sensor.
STOP LIGHT DISCONNECTION WARNING
When the ignition SW is turned on and the brake pedal is pressed (Stop light SW on), if the stop light circuit is open, the current
flowing from TERMINAL 7 of the light failure sensor to TERMINALS 1, 2 changes, so the light failure sensor detects the
disconnection and the warning circuit of the light failure sensor is activated.
As a result, the current flows from TERMINAL 4 of the light failure sensor to TERMINAL 11 to GROUND and turns the rear lights
warning light on. By pressing the brake pedal, the current flowing to TERMINAL 8 of the light failure sensor keeps the warning
circuit on and holds the warning light on until the ignition SW is turned off.
S6 STOP LIGHT SW
2±1 : Closed with the brake pedal depressed
L4 LIGHT FAILURE SENSOR
1, 2, 7±GROUND : Approx. 12 volts with the stop light SW on
4, 8±GROUND : Approx. 12 volts with the ignition SW at ON position
11±GROUND : Always continuity
: PARTS LOCATION
CodeSee PageCodeSee PageCodeSee Page
C734L436R737
H1736R637S635
: RELAY BLOCKS
CodeSee PageRelay Blocks (Relay Block Location)
118R/B No.1 (Instrument Panel Left)

@@@ @@@ @@@
€€€ €€€ €€€
ÀÀÀ ÀÀÀ ÀÀÀ
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CodeSee PageJunction Block and Wire Harness (Connector Location)
IB20Instrument Panel Wire and Instrument Panel J/B (Lower Finish Panel)
3C22Instrument Panel Wire and J/B No.3 (Instrument Panel Left Side)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CodeSee PageJoining Wire Harness and Wire Harness (Connector Location)
IE142Floor Wire and Instrument Panel Wire (Left Kick Panel)
BV150Luggage Room Wire and Floor Wire (Luggage Compartment Left)
: GROUND POINTS
CodeSee PageGround Points Location
BL50Under the Left Quarter Pillar
BO50Back Panel Center
: SPLICE POINTS
CodeSee PageWire Harness with Splice PointsCodeSee PageWire Harness with Splice Points
I544Cowl WireB1850Luggage Room Wire
SYSTEM OUTLINE
SERVICE HINTS