ignition TOYOTA CAMRY HYBRID 2019 Owners Manual (in English)

29
CHANGING PCS ALERT TIMING
FarMiddle
(default) Near
Monocular camera sensor
Millimeter
wave radar
As Qart of the 1re$oMMision 4ystem, this function is aMso designed to first Qrovide an
alert and then automatic braking if needed.
Refer to a Toyota Owner’s Manual for additional limitations and infor\
mation.6nder certain conditions, the 1$4 system incMuded with the 5441 QacLage may
also help to detect a pedestrian in front of your vehicle using the in-v\
ehicle camera
and front-grill mounted millimeter wave radar. The in-vehicle camera of \
PCS
detects a QotentiaM Qedestrian Cased on si[e, QrofiMe, and motion of the detected
Qedestrian. )owever, a Qedestrian may not Ce detected deQending on the
conditions, incMuding the surrounding Crightness and the motion, Qosture, si[e, and
angMe of the QotentiaM detected Qedestrian, Qreventing the system from oQerating or
engaging.
PCS PEDESTRIAN DETECTION

1ress iw switches and seMect or from the Multi-Information
%isQMay .I%
.

1ress i
w switches and seMect from the .I% and then Qress iw. 5he
setting screen is displayed.

1ress i
w each time to change the setting. &ach time it is Qressed, the
resQonse to the 1$4 aMert timing changes as shown aCove. :ou can Qress i
w to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

31
563/I/( 5)& -%A 4:45&. 0/0''
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
LANE DEPARTURE ALERT
LDA function display
Steering assist indicatorLDA indicatorLane markers
(2)
(1)
-ane %eQarture AMert -%A
indicator fMashes orange when oQerating.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

32
TOYOTA SAFETY SENSE™
The LDA function disQMays when the .uMtiInformation %isQMay .I%
is switched
to the driving assist system information screen.

5he system disQMays soMid white Mines on the -%A indicator when visiCMe Mane
markers on the road are detected. A side flashes orange to alert the dri\
ver when the
vehicle deviates from its lane.

5he system disQMays outMines on the -%A indicator when Mane marLers on the road
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
A%+645I/( -%A A-&35 4&/4I5I7I5:
DISABLING STEERING ASSIST
5he driver can adKust the sensitivity of the -%A warning
function from the
.uMtiInformation %isQMay .I%
customi[ation screen.
High  Is designed to warn aQQroYimateMy Cefore the front
tire crosses the lane marker.
Normal  Is designed to warn aQQroYimateMy when the front
tire crosses the lane marker.
-A/& %&1A3563& A-&35 $0/5I/6&%


1ress iw switches and seMect or from the Multi-Information
%isQMay .I%
.

1ress i
w switches and seMect the setting function and then Qress i.w

1ress i
w each time to change the setting.

1ress i
w to go CacL to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.

1ress i
w switches and seMect or from the Multi-Information Display
.I%
.

1ress i
w switches and seMect the setting function and then Qress i.w

1ress i
w each time to change the setting.

1ress i
w to go CacL to the menu.

33
48A: 8A3/I/( 4:45&.
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system aMerts the driver using a Cu[[er sound and a warning disQMays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
A%+645I/( 48A: A-&35 4&/4I5I7I5:
%I4A#-I/( -%A 48A: 8A3/I/( 4:45&.

1ress iw switches and seMect or from the Multi-Information
%isQMay .I%
.

1ress i
w switches and seMect the setting function and then Qress i.w

1ress i
w each time to change the setting.

1ress i
w to go CacL to the menu.

1ress i
w switches and seMect or from the Multi-Information
%isQMay .I%
.

1ress i
w switches and seMect the setting function and then Qress i.w

1ress i
w each time to change the setting.

1ress i
w to go CacL to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES