TOYOTA GR86 2022 Owners Manual (in English)

89
2
2-1. Instrument cluster
Vehicle status information and indicators
TRACK mode
Multi-information display
Presents the driver with a variety of vehicle data ( P. 9 2 )
Displays warning messages in case of a malfunction (P.344)
Tachometer
Displays the engine speed in revolutions per minute
The red zone will be lower than normal, when the engine is cold
Outside temperature
Displays the outside temperature within the range of -40°C (-40°F) to 50°C (122°F).
Low outside temperature indicator comes on when the ambient temperature is 3°C
(37°F) or lower.
Clock
Engine coolant temperature gauge
Displays the engine coolant temperature
Fuel gauge
Speedometer
Shift position and gear position ( P.143, 148)
Odometer and trip meter display ( P. 9 0 )
■REV indicator
When the engine speed reaches a
set speed, the shift position and
shift range indica tor will illuminate
in orange and a bu zzer will sound.
If the engine speed enters the red
zone, the shift position and shift
range indicator will illuminate in red
and a buzzer will sound.
The default setting for the REV indica-
A
C
D

902-1. Instrument cluster
tor is disabled. The setting can be ena-
bled/disabled on of the
multi-information display. ( P.377)
The engine speed at which the REV
indicator is displayed can be changed
on of the multi-information display.
( P.377)
■Outside temperature display
●In the following situations, the correct
outside temperature may not be dis- played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds (less than 20 km/h [12 mph])
• When the outside temperature has
changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
●When “--” is displayed, the system may be malfunctioning.
Take your vehicle to any authorized
Toyota retailer or Toyota authorized repairer, or any reliable repairer.
■Liquid crystal display
 P. 9 3
■Customization
The meter display ca n be customized on
the multi-information display. ( P.377)
■Changing the display
Press the display change button
until the desired item is displayed.
WA R N I N G
■The information display at low
temperatures
Allow the interior of the vehicle to warm up before using the liquid crys-
tal information display. At extremely
low temperatures, the information dis- play monitor may respond slowly, and
display changes may be delayed.
For example, there is a lag between
the driver’s shifting and the new gear number appearing on the display.
This lag could cause the driver to
downshift again, causing rapid and excessive engine braking and possi-
bly an accident resulting in death or
injury.
NOTICE
■To prevent damage to the engine
and its components
●Do not let the indicator needle of
the tachometer enter the red zone,
which indicates the maximum
engine speed.
●Pay extra attention to the engine
speed when the engine is cold, as the red zone will be lower than nor-
mal.
●If the engine coolant temperature
gauge indicator is flashing, the
engine may be overheating. Imme- diately stop the vehicle in a safe
place, and check the engine after it
has cooled completely. ( P.362)
Odometer and trip meter
display

91
2
2-1. Instrument cluster
Vehicle status information and indicators
■Display items
 Odometer
Displays the total distance the vehicle
has been driven.
 Trip meter A/Trip meter B
Displays the distance the vehicle has
been driven since the meter was last
reset. Trip meters A and B can be used
to record and display different distances
independently.
To reset, display th e desired trip meter
and press and hold the display change
button.
When the headlights or front posi-
tion lights are on, the brightness of
the meter and instrument panel
lights can be adjusted using the
instrument panel brightness dial.
1 Brighter
2 Darker
■Instrument panel light brightness adjustment
When the headlights or front position
lights are turned on, the meter and instrument panel lights will be dimmed.
However, if the instrument panel bright-
ness dial is set to the highest position, the lights will not dim even if the head-
lights or front position are turned on.
■Auto dimmer cancel
When the surrounding area is bright, such as during the day, or if the lights
are turned on before necessary, the
automatic dimming function will be can- celled. In this case, the brightness can-
not be adjusted, even if the instrument
panel brightness dial is turned.
■Customization
Some functions can be customized.
( P.377)
The clocks can be adjusted on the
multimedia system screen.
■Setting the clock to be
adjusted automatically
1 Press .
2 Select .
3 Select “General”.
4 Select “Clock”.
5 Select “Time Setting”.
6 Select “Sync With Phone”.
The clock will be set and adjusted
automatically when a smartphone
is connected via Bluetooth®for
transferring phonebook data. For
Changing the instrument
panel light brightness
Adjusting the clock

922-1. Instrument cluster
details, refer to the “Multimedia
owner's manual”.
■Adjusting the clock manually
1 Press .
2 Select .
3 Select “General”.
4 Select “Clock”.
5 Select “Time Setting”.
6 Select “Manual” then adjust the
clock.
7 Select “OK”.
■Changing the clock between
12H/24H format
1 Press .
2 Select .
3 Select “General”.
4 Select “Clock”.
5 Select “12H” or “24H”.
■Clock settings screen
The clock setting screen can also be
displayed by touching the clock on the status bar.
■Display
Normal display
By selecting menu icons on the
multi-information display, a variety
of driving-related information can
be displayed. The multi-information
display can also be used to change
display settings and other vehicle
settings.
Warning or advice pop-up displays
are also displayed in certain situa-
tions.
TRACK mode display
Vehicles without EyeSight:
When in TRACK mode, the TRACK
mode display will remain displayed.
Vehicles with EyeSight:
When in TRACK mode, the
Pre-Collision Braking System will
be turned off and the TRACK mode
display will remain displayed.
Multi-information display
The multi-information display
presents the driver with a vari-
ety of vehicle data.
Displays and menu icons

93
2
2-1. Instrument cluster
Vehicle status information and indicators
( P.183)
Warning or advice pop-up displays
are also displayed in certain situa-
tions.
Engine coolant temperature
( P.88)
Engine oil temperature
Displays the engine oil temperature.
Fastest lap time
Refer to P.97 for the operating method.
Current lap time
Refer to P.97 for the operating method.
■Menu icons
Select a menu icon to display its
content.
*: Displayed when the navigation sys-
tem of Apple CarPlay or Android Auto
is operating. For details, refer to the
“Multimedia owner's manual”.
■Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liq uid crystal displays,
and there is no problem continuing to use the display.
The multi-information display is
operated using the meter control
switches.
For information pertaining to the
content of each menu icon, refer to
the explanation of each item under
the heading of the relevant menu
icon.
Driving information ( P. 9 4 )
Sport information ( P. 9 5 )
Navigation system-linked dis-
play* ( P. 9 7 )
Audio system-linked display
( P. 9 7 )
Driving suppor t system infor-
mation display (if equipped)
( P. 9 8 )
Driving support system set-
ting display ( P. 9 8 )
A
C
D
Settings display (P. 9 8 )
Warning message display
( P.344)
WA R N I N G
■The multi-information display at
low temperatures
Allow the interior of the vehicle to warm up before using the liquid crys-
tal information display. At extremely
low temperatures, the information dis- play monitor may respond slowly, and
display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display.
This lag could cause the driver to downshift again, causing rapid and
excessive engine braking and possi-
bly an accident resulting in death or injury.
Changing the meter display

942-1. Instrument cluster
/ : Select menu icons
/ : Change displayed con-
tent, scroll up/down the screen
and move the cursor
Press: Enter
Press and hold: Reset/change
scale of the G-force display
Return to the previous screen
■Display items
Press or of the meter con-
trol switch and select . Then
press or to display the fol-
lowing items:
 Driving information (page 1)
 Driving information (page 2)
 Driving information (page 3)
 Driving information (page 4)
■Driving information (page 1)
Use the display as a reference.
Voltmeter
Displays the char ging voltage.
As voltage displayed may be different
from the actual battery voltage, use the
voltmeter as a guideline.
Engine oil temperature gauge
Displays the engine oil temperature.
■Driving information (page 2)
Use the display as a reference.
Current fuel consumption
Displays the current rate of fuel con-
sumption.
Average fuel consumption
Displays the average fuel consumption
since the function was reset.
Driving range
Displays the estimated maximum dis-
tance that can be driven with the quan-
tity of fuel remaining.
This distance is computed based on
Content of driving informa-
tion
A
C
A
A
C

95
2
2-1. Instrument cluster
Vehicle status information and indicators
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
When only a small amount of fuel is
added to the tank, the display may not
be updated. When refueling, turn the
engine switch off. If the vehicle is
refueled without turning the engine
switch off, the display may not be
updated.
■Driving information (page 3)
Use the display as a reference.
Average vehicle speed
Displays the average vehicle speed
since display was reset.
Driving time
Displays the cumulative time the vehi-
cle has been driven since display was
reset.
Driving distance
Displays the cumulative distance the
vehicle has been driven since display
was reset.
Pressing and hold ing will reset
the average vehicle speed/driving
time/driving distance.
■Driving information (page 4)
Displays each tire pressure.
( P.303)
■Display items
Press or of the meter con-
trol switch and select . Then
press or to display the fol-
lowing items:
 G-force
Suitable for confirming current lateral
G-forces on the vehicle.
 G-force (peak hold function)
Suitable for confirming the size and
direction of the maximum lateral
G-forces on the vehicle.
 Power and torque curve
 Stopwatch
■G-force
Displays lateral G-forces on the
vehicle.
Also displays, around the periph-
ery of the G-force display, the left
and right steering amount, acceler-
ator pedal input, and brake fluid
pressure.
This display is intended for use as a
guideline. Depending on factors
such as the road surface condition,
temperature and vehicle speed, the
display may not show the actual
condition of the vehicle.
A
C
Sport information

962-1. Instrument cluster
Acceleration G-force on the
vehicle
Accelerator pedal input
Brake fluid pressure
Steering amount
Press and hold to change the
range of the acceleration G-force
display between 1.0 G and 0.5 G.
■G-force (peak hold function)
Displays lateral G-forces on the
vehicle.
Also displays, around the periph-
ery of the G-force display, the left
and right steering amount, acceler-
ator pedal input, and brake fluid
pressure.
This display is intended for use as a
guideline. Depending on factors
such as the road surface condition,
temperature and vehicle speed, the
display may not show the actual
condition of the vehicle.
Record of the maximum
G-forces
Press and hold to reset the record
of maximum G-forces.
Acceleration G-force on the
vehicle
Accelerator pedal input
Brake fluid pressure
Steering amount
■Power and torque curve
This chart is intended for reference
only and does not show the actual
engine torque or output.
Power output
To r q u e
Current engine speed
The vertical bar will slide laterally
according to the current engine speed.
A
C
D
A
C
D
A
C

97
2
2-1. Instrument cluster
Vehicle status information and indicators
■Stopwatch
Measures and displays current lap
time and previous lap times.
Top screen
Fastest lap time (top screen)
When the timer is reset, “- -’- -”- -” will
be displayed.
Measurement screen
Fastest lap time (measurement
screen)
Current lap time
To t a l l a p t i m e
Past lap times
Records of the 50 most recent lap times
will be displayed.
Meter control switch operation
guide
 Changing between the stop-
watch screens
To change to the measurement screen:
Press .
To change to the top screen: Press .
 Operating the measurement
screen
: Start/stop measurement
: Mark off one lap
: Reset measured lap times
: Scroll through the lap times
 Resetting measured lap times
After stopping the measurement, press
.
 To display other content while
the stopwatch is operating
If the measurement screen is dis-
played, press to display the top
screen.
Then operate the meter control
switches to display other content. While
other items are displayed, the measure-
ment will continue but the stopwatch
cannot be operated.
Select to display the route guidance
information.
Select to enable selection of an
audio source or track on the display
using the meter control switches.
A
A
C
D
Navigation system-linked
display
Audio system-linked display

982-1. Instrument cluster
Select to display the operational
status of the Adaptive Cruise Con-
trol system ( P.185, 201)
The settings of the following sys-
tems can be changed.
 LDW (Lane Departure Warning)
(if equipped)
 PCB (Pre-Collision Braking) (if
equipped)
 BSD/RCTA (if equipped)
 RAB (Reverse Automatic Brak-
ing system) (if equipped)
 (Sonar Audible Alarm) (if
equipped)
 SRH (Steering Responsive
Headlight) (if quipped)
■Meter display settings that can
be changed
 Units (if equipped)
Select to change the units of measure
displayed.
 Startup Scrn
Select to enable/disable the startup
screen when the engine switch is
turned to ON.
 GSI (if equipped)
Select to enable/disable the shift posi-
tion indicator and shift-up indicator.
 REV. (REV indicator)
• Select to enable/disable the rev indi-
cator.
• Select to enable/disable the sounding
of a buzzer when the REV indicator is
illuminated.
• Select to set the engine speed at
which the rev indicator (orange) will
begin to be displayed.
■Vehicle functions and settings
that can be changed
 P.377
■Suspension of the settings display
●Some settings cannot be changed while driving. When changing set-
tings, park the vehicle in a safe place.
●If a warning message is displayed,
operation of the settings display will
be suspended.
Driving support system
information display (if
equipped)
Driving support system set-
ting display
Settings display
WA R N I N G
■Cautions during setting up the display
As the engine needs to be running
during setting up the display, ensure that the vehicle is parked in a place
with adequate ventilation. In a closed
area such as a garage, exhaust gases including harmful carbon mon-
oxide (CO) may colle ct and enter the
vehicle. This may lead to death or a serious health hazard.
NOTICE
■While setting up the display
To prevent battery discharge, ensure that the engine is running while set-
ting up the display features.