check engine light TOYOTA HIGHLANDER 2001 Service Manual PDF

A94205
Seal Packing
Seal Packing
A94204NutNut AA A A
B
AABB
SST
A36541
- ENGINE MECHANICALPARTIAL ENGINE ASSY (2AZ-FE)
14-67
2560 Author
: Date
:
2005 HIGHLANDER REPAIR MANUAL (RM1144U)
90. INSTALL CYLINDER HEAD COVER SUB-ASSY
(a) Remove any old packing (FIPG) material.
(b) Apply seal packing to the 2 locations shown in the illustra-
tion.
Seal packing: Part No. 08826-00080 or equivalent
NOTICE:

Remove any oil from the contact surface.

Install the cylinder head cover within 5 minutes after
applying seal packing.

Do not apply engine oil for at least 2 hours after instal-
ling.
(c) Install the cylinder head cover with the 8 bolts and 2 nuts.
Torque:
11 NVm (112 kgfVcm, 8 ftVlbf) for nut
11 NVm (112 kgfVcm, 8 ftVlbf) for bolt A
14 NVm (143 kgfVcm, 10 ftVlbf) for bolt B
91. INSTALL SPARK PLUG
Torque: 19 NVm (194 kgfVcm, 14 ftVlbf)
92. INSTALL VENTILATION VALVE SUB-ASSY
(a) Apply adhesive on the threads of the ventilation valve.
Torque: 19 NVm (194 kgfVcm, 14 ftVlbf)
Adhesive: Part No. 08833-00070 THREE BOND 1324 or equivalent
93. INSTALL OIL FILLER CAP SUB-ASSY
94. INSTALL OIL FILTER UNION
(a) Using a 12 mm hexagon wrench, install the oil filter union.
Torque: 30 NVm (306 kgfVcm, 22 ftVlbf)
95. INSTALL OIL FILTER SUB-ASSY
(a) Check and clean the oil filter installation surface.
(b) Apply clean engine oil to the gasket of a new oil filter.
(c) Lightly screw the oil filter into place, and tighten it until the
gasket contacts the seat.
(d) Using SST, tighten it an additional 3/4 turn.
SST 09228-06501