high beam TOYOTA HIGHLANDER 2019 Owners Manual (in English)

1
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
INDEX
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructio\�ns and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
Engine maintenance 9
Fuel tank door release & cap 8
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel 2-3
Instrument panel light control 8
Keyless entry
1,2 6-7
Smart Key system1,2 7
OVERVIEW
FEATURES & OPERATIONS FEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES TOYOTA SAFETY SENSE™ P (TSS-P)
Air conditioning/heating
22-23
All-wheel drive lock switch 31
Audio 20
Auto lock/unlock
1 10
Automatic transmission 10
Bird’s Eye View Camera
with Perimeter Scan function 28
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA) 27
Clock 10
Door locks
1,2 11
Downhill Assist Control system (DAC) 3 0
Driver Easy Speak 25
Garage door opener (HomeLink
®)3 25
Intelligent parking assist 26
Lights
1,2 & turn signals1 17
Moonroof1 12
Multi-Information Display (MID)2 18
Panoramic moonroof 12
Parking brake 11
Power Liftgate (back door)
1,2 13
Power outlets-12V DC 21
Power outlets-120V AC 21
Rear seat entertainment system 25
Rear view monitor system 27
Seat adjustments-Front 14
Seat adjustments-Rear 15
Seat heaters/ventilators 24
Seats-Head restraints 15
Seats-Stowing &
returning 3rd row seats 15Snow mode button
31
Steering lock release 11
Steering wheel switches &
telephone controls (Bluetooth
®) 19
Steering wheel-Hearer 23
Stop & Start Engine System 29
Tilt & telescopic steering wheel 14
USB charge-ports 21
USB media/AUX port 21
Vehicle Stability Control (VSC)/
TRAC OFF switch 30
Windows-Power
1 18
Windshield wipers & washers1 16
Automatic High Beams (AHB) 42
Dynamic Radar
Cruise Control (DRCC) 38-41
Lane Departure Alert with
Steering Assist (LDA w/SA) 35-38
Pre-Collision System with Pedestrian
Detection (PCS w/PD) 33-35
Quick overview-
Toyota Safety Sense™ P (TSS-P) 32
Sensors 32
BLUETOOTH® DEVICE
PAIRING SECTION 48-57
Floor mat installation
47
Rear door child safety locks 44
Seat belt reminder indicator 43
Seat belts 43
Seat belts-3rd row center 43
Seat belts-Shoulder belt anchor 43
Spare tire & tools 45
Star Safety System
TM 46-47
Tire Pressure Monitoring
(warning) System (TPMS) 44
114709_MY19_Highlander_QRG_V3_ML_0809_R1.indd 18/14/18 1:22 AM

2
Steering wheel controls
Audio remote
control switches2Meter control switches
Dynamic Radar Cruise
Control
(DRCC)
Dynamic Radar
Cruise Control
(DRCC) vehicle-
to-vehicle distance
button
Lane Departure
Alert with Steering
Assist (LDA w/SA)
switch
Tilt and telescopic steering
lock release lever
(below the steering wheel)
Headlight, turn signal and front fog light
1 controls
Windshield wiper and
washer controls
Meter/Multi-information display (MID)
“ENGINE START
STOP” button
(Smart Key)
1
Ignition (Standard Key)1
Hood lock release leverFuel tank door release lever
Tire pressure warning reset switch
Windshield wiper de-icer switch
Heated steering wheel switch
1
Intelligent parking assist switch1,2
Automatic High Beam (AHB) switch
Stop & Start Engine System cancel switch
1
Birds Eye View Camera switch1,2
Power back door switch1
Voice command switch2
Telephone
switches2
OVERVIEWInstrument panel
114709_MY19_Highlander_QRG_V3_ML_0809_R1.indd 28/14/18 1:22 AM

4
Automatic High Beam (AHB)
indicator
For details, refer to “Indicators and warning lights,” Section 2, \�2019 Owner’s
Manual.
Constant speed cruise control
idicator/Constant speed cruise
control SET indicator
Electric power steering system
warning1
Downhill Assist Control indicator4
Anti-lock Brake (ABS) System
warning1
Airbag SRS warning1
Air Bag ON/OFF indicator1
All-wheel drive lock indicator1,4
Brake system warning1
BSM outside rear view mirror
indicator4
Blind Spot Monitor (BSM)
indicator4
Eco driving indicator1
Driver’s and front passenger’s seat
belt reminder
(alarm will sound if speed is over 12 mph)
Dynamic Radar Cruise Control
(DRCC)(vehicle-to-vehicle distance
control mode) indicator/DRCC
SET indicator
Engine coolant temperature gauge Shift position and
shift range
Tachometer
Multi-Information Display (MID) Speedometer
Fuel gauge
Outside temperature
Trip meter reset knob
Odometer/trip meter/Stop & Start Engine
System operation time display
1
Instrument panel light control button
Service indicators and reminders
1 If equipped
OVERVIEW
Instrument cluster
Indicator symbols
114709_MY19_Highlander_QRG_V3_ML_0809_R1.indd 48/14/18 1:22 AM

5
Front Fog light indicator4
Fuel tank door position
Vehicle Stability Control (VSC) OFF
indicator1
2nd and 3rd row seat belt reminder
indicator (warning buzzer)
Malfunction/Check Engine indicator1
Master warning1,2
Tire Pressure Warning1
Turn signal indicator
Intelligent parking assist indicator4
Slip indicator1,3
SNOW mode indicator
Stop & Start Engine System
indicator2,4
Stop & Start Engine System cancel
indicator4
Security indicator
Headlight low/high beam
indicator
Low fuel level warning
Parking brake warning
1
“PWR MODE” indicator4
Land Departure Alert with Steering
Assist (LDA w/SA) indicator
[white/green/amber
3 indicator]
Pre-Collison System (PCS) warning1,2
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
1
If the indicator does not turn off within a few seconds of starting the \�engine, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner\�’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.
114709_MY19_Highlander_QRG_V3_ML_0809_R1.indd 58/14/18 1:22 AM

17
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Front fog lights come on only when the headlights are on low beam.
Daytime Running Light system (DRL) Automatically turns on under certain
conditions to make vehicle more visible to other drivers. Not for use at\� night. Automatic light cut off system Lights automatically turn off after a delay of 30
seconds, or when lock switch on remote is pushed after all doors are loc\�ked.
Automatic High Beam (AHB) system Automatically switches between high and
low beams as appropriate to keep the high beam lamps on for as long as p\�ossible
for enhanced vision at night. Refer to Toyota Safety Sense™ P (TSS-P) in this guide or the Owner’\�s Manual for
more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for detai\�ls.
Low beam
Parking lights
Auto
DRL OFFHigh beam
or
Auto High Beam*
High beam
flasherHeadlights
Turn
Right turn
Lane change
Lane change Left turn
Lights & turn signals
HEADLIGHTS
FRONT FOG LIGHTS (IF EQUIPPED)
TURN SIGNALS
114709_MY19_Highlander_QRG_V3_ML_0809_R1.indd 178/14/18 1:22 AM

32
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear \�view mirror
and a millimeter-wave radar mounted in the front grill. These sensors su\�pport the
driver assist systems.
Camera sensor
Radar sensor
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ P (TSS-P) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic si\�tuations, in
certain conditions. TSS-P is designed to help support the driver’s aw\�areness,
decision making and vehicle operation contributing to a safe driving exp\�erience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense.
Lane Departure Alert with Steering Assist (LDA w/SA)
LDA w/SA is designed to provide notification when the system detects an
unintended lane departure.
The Steering Assist function is designed to provide small corrective
steering inputs to the steering wheel for a short period of time to help\�
keep the vehicle in its lane.
Automatic High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles and the
tail lights of preceding vehicles and switch between high beams and low \�
beams as appropriate. Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced millimeter-wave radar sensor system is designed to
work with the camera sensor to help recognize a preceding pedestrian,
and provide an alert, mitigation and/or avoidance support in certain
conditions.
Dynamic Radar Cruise Control (DRCC)
DRCC is designed to help maintain a pre-set distance to a preceding
vehicle when the preceding vehicle is traveling at a lower speed.
114709_MY19_Highlander_QRG_V3_ML_0809_R1.indd 328/14/18 1:22 AM

42
TOYOTA SAFETY SENSE™
When all of these conditions are met, high beams will be automatically t\�urned on
(after approximately 1 second):• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail\� lights turned on.
• There are few street lights on the road ahead.
If any of these conditions occur, the system is designed to automaticall\�y turn off
high beams: • Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lightsturned on.
• There are many streetlights on the road ahead.
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
(1) With the engine switch in IGNITION ON mode and headlight switch turned to “AUTO” or “
”position, push lever away from you.
(2) Press the “
” switch.
The “
” indicator will come on when the headlights are turned on
automatically to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The AHB indicator will turn off. To turn switch to “
” position and the manual
high beam indicator “
” turns on.
ACTIVATING THE AHB SYSTEM
Automatic High Beams (AHB)
AHB is a safety system designed to help drivers see more of what’s ah\�ead at
nighttime and reduce glare for oncoming drivers. When enabled, AHB uses \�an
in-vehicle camera to help detect the headlights of oncoming vehicles and\� tail lights
of preceding vehicles, then automatically switches between high and low \�beams
as appropriate to provide the most light possible and enhance forward vi\�sibility.
By using high beams more frequently, the system may allow earlier detect\�ion of
pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB \�operation,
settings adjustments, limitations, and precautions before attempting to \�use it.
(2) (1)
114709_MY19_Highlander_QRG_V3_ML_0809_R1.indd 428/14/18 1:22 AM