cooling TOYOTA HILUX 2012 Owners Manual (in English)

250
HILUX_EE (OM0K132E)
3-1. Using the air conditioning system and defogger
Manual air conditioning system
: If equipped
Outside/recirculated air mode lever
Air outlet selection dial
Temperature control dial
Fan speed control dial Cooling and dehumidification function on/off button (if equipped)

254 3-1. Using the air conditioning system and defogger
HILUX_EE (OM0K132E)
Fogging up of the windows
The windows will easily fog up when the humidity in the vehicle is high.
Turning the “A/C” button on will dehumidify the air from the outlets and
defog the windshield effectively.
If you turn the “A/C” button off, the windows may fog up more easily.
The windows may fog up if the recirculated air mode is used.
Outside/recirculated air mode
When driving on dusty roads such as tunnels or in heavy traffic, set the out-
side/recirculated air mode lever to the recirculated air mode. This is effective
in preventing outside air from entering the vehicle interior. During cooling
operation, setting the recirculated air mode will also cool the vehicle interior
effectively.
When the outside temperature falls to nearly 0°C (32°F)
The dehumidification function may not operate even when the “A/C” button
is pressed.
Air conditioning odors
During use, various odors from inside and outside the vehicle may enter
into and accumulate in the air conditioning system. This may then cause
odor to be emitted from the vents.
To reduce potential odors from occurring:
It is recommended that the air conditioning system be set to outside air
mode prior to turning the vehicle off.
Air conditioning filter
P. 504

256
3-1. Using the air conditioning system and defogger
HILUX_EE (OM0K132E)
Automatic air conditioning system
: If equipped
Air outlets and fan speed are automatically adjusted according to the
temperature setting.
Air intake display Recirculated air mode button
Cooling and dehumidification
function on/off button
Fan speed displayAir outlet display
Outside air mode button
“OFF” button
Automatic
mode button
Fan speed
control buttonsAir outlet
selector buttonsTemperature
displayTemperature
control buttons
Windshield
defogger button

257 3-1. Using the air conditioning system and defogger
3
Interior features
HILUX_EE (OM0K132E)
Using the automatic air conditioning system
Press the “AUTO” button.
The air conditioning system begins to operate. Air outlets and
fan speed are automatically adjusted according to the tem-
perature setting.
Press to increase the temperature and to
decrease the temperature.
Press the “A/C” button.
The air cooling and dehumidification function switches
between on and off each time the button is pressed.
Adjusting the settings manually
To adjust the fan speed, press to increase the fan
speed and to decrease the fan speed.
Press the “OFF” button to turn the fan off.
To adjust the temperature settings, press to increase
the temperature and to decrease the temperature.
To change the air outlets, press , , or
.
STEP1
STEP2
STEP3
STEP1
STEP2
STEP3

261 3-1. Using the air conditioning system and defogger
3
Interior features
HILUX_EE (OM0K132E)
Using automatic mode
Fan speed is adjusted automatically according to the temperature setting
and the ambient conditions.
Therefore, the fan may stop for a while until warm or cool air is ready to flow
immediately after the “AUTO” button is pressed.
Fogging up of the windows
The windows will easily fog up when the humidity in the vehicle is high.
Turning the “A/C” button on will dehumidify the air from the outlets and
defog the windshield effectively.
If you turn the “A/C” button off, the windows may fog up more easily.
The windows may fog up if the recirculated air mode is used.
Outside/recirculated air mode
When driving on dusty roads such as tunnels or in heavy traffic, set the
outside/recirculated air mode button to the recirculated air mode. This is
effective in preventing outside air from entering the vehicle interior.
During cooling operation, setting the recirculated air mode will also cool
the vehicle interior effectively.
Outside/recirculated air mode may automatically switch depending on
the temperature setting or the inside temperature.
When the outside temperature falls to nearly 0°C (32°F)
The dehumidification function may not operate even when the “A/C” button
is touched.

486 4-3. Do-it-yourself maintenance
HILUX_EE (OM0K132E)
Engine coolant
The coolant level is satisfactory if it is between the upper and lower
lines on the reservoir when the engine is cold.
Reservoir cap
Upper line
Lower line
If the level is on or below the
lower line, add coolant up to the
upper line. (P. 584)
Coolant selection
Only use “Toyota Super Long Life Coolant” or a similar high quality ethylene
glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant
with long-life hybrid organic acid technology.
“Toyota Super Long Life Coolant” is a mixture of 50% coolant and 50%
deionized water. (Minimum temperature: -35C [-31F])
For more details about engine coolant, contact any authorized Toyota dealer
or repairer, or another duly qualified and equipped professional.
If the coolant level drops within a short time of replenishing
Visually check the radiator, hoses, engine coolant reservoir caps, drain cock
and water pump.
If you cannot find a leak, have any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional, test the cap and check for
leaks in the cooling system.

487 4-3. Do-it-yourself maintenance
4
Maintenance and care
HILUX_EE (OM0K132E)
CAUTION
When the engine is hot
Do not remove the engine coolant reservoir cap.
The cooling system may be under pressure and may spray hot coolant if the
cap is removed, causing serious injuries, such as burns.
NOTICE
When adding coolant
Coolant is neither plain water nor straight antifreeze. The correct mixture of
water and antifreeze must be used to provide proper lubrication, corrosion
protection and cooling. Be sure to read the antifreeze or coolant label.
If you spill coolant
Be sure to wash it off with water to prevent it from damaging parts or paint.

5
583 5-2. Steps to take in an emergency
When trouble arises
HILUX_EE (OM0K132E)
NOTICE
When handling jumper cables
When connecting the jumper cables, ensure that they do not become entan-
gled in the cooling fan or belt.

584
5-2. Steps to take in an emergency
HILUX_EE (OM0K132E)
If your vehicle overheats
If your engine overheats:
Stop the vehicle in a safe place and turn off the air condi-
tioning system.
Check to see if steam is coming out from under the hood.
If you see steam:
Stop the engine. Carefully lift the hood after the steam sub-
sides and then restart the engine.
If you do not see steam:
Leave the engine running and carefully lift the hood.
Check to see if the cooling fan is operating.
If the fan is operating:
Wait until the temperature of the engine (shown on the
instrument panel) begins to fall and then stop the engine.
If the fan is not operating:
Stop the engine immediately and call any authorized Toyota
dealer or repairer, or another duly qualified and equipped
professional.
After the engine has cooled
down sufficiently, check the
engine coolant level and
inspect the radiator core (radi-
ator) for any leaks.
STEP1
STEP2
STEP3
STEP4

606 6-1. Specifications
HILUX_EE (OM0K132E)
Cooling system
Capacity
With
manual
transmissionWithout
heater9.0 L (9.5 qt., 7.9 Imp.qt.)
With
heater9.8 L (10.4 qt., 8.6 Imp.qt.)
With
automatic
transmissionWithout
heater10.3 L (10.9 qt., 9.1 Imp.qt.)
With
heater11.1 L (11.7 qt., 9.8 Imp.qt.)
Coolant typeUse either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene gly-
col-based non-silicate, non-
amine, non-nitrite, and non-
borate coolant with long-life
hybrid organic acid technology
Do not use plain water alone.