OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
5
Anti-lock Brake System warning*
Turn signal indicator Headlight high beam indicator
Cruise control indicator
Electric power steering system warning
*
Slip indicator*
Vehicle Stability Control OFF indicator*
Low fuel level warning
Low outside temperature indicator
Engine immobilizer indicator
ECO driving indicator light
*
Cruise control SET indicator
Fuel tank door position
10
FEATURES/OPERATIONS
Windshield wipers & washer
Front
Rear
Lights & turn signals
Turn signals
Headlights
Headlights
Parking lights
Daytime running lighs (DRL) off
Right turn
Lane change
Lane change
Left turn
High beam flasher
(Pull) Low beam
(Original position)
High beam
(Push)
Interval wipe
Slow
FastPull to
wash and wipe
Push lever to wash and wipeMist
Wash and wipe
Wipe
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
15
The camera for the rear view monitor system is located near the license plate.
To adjust the image on the rear view monitor screen, press the setup button
“
” on the left side of screen and select “Display” on the setup screen. Then
select “Camera” to adjust the screen brightness and contrast.
For more information, refer to Scion.com to download the SCION Audio System Owner’s
Manual or Scion Bespoke Audio with Navigation Owner’s Manual.
The rear view monitor system camera is located as shown in the illustration.
REAR VIEW MONITOR SYSTEM CAMERA
The camera uses a special lens. The distance of the image that appears on the
screen differs from the actual distance.
When the camera is used under fluorescent lights, sodium lights or mercury lights
etc., the lights and the illuminated areas may appear to flicker.
In the following cases, it may become difficult to see the images on the screen,
even when the system is functioning:
• In the dark (for example, at night)
• When the temperature near the lens is high or low
• When water droplets are adhering to the camera, or when humidity is
high (for example, when it rains)
• When foreign matter (for example, snow or mud) is adhering to the camera
• When the camera has scratches or dirt on it
• When the sun or the beam of headlights is shining directly into the camera
lens
INFORMATION
*Smear effect
A phenomenon that occurs when a bright light (for example, sunlight reflected off
the vehicle body) is picked up by the camera; when transmitted by the camera,
the light source appears to have a vertical streak above and below it.
If a bright light (for example,
sunlight reflected off the vehicle
body) is picked up by the camera,
a Smear effect* may occur.
INFORMATION
