display TOYOTA LAND CRUISER 2007 J200 Navigation Manual

civ
5. To delete the point, touch the “Yes”
switch.
To cancel the deletion, touch the
“No”
switch.
Map color
1. Push the “MENU” button.
2. Touch the “Setup” switch. Then
touch
switch three times to display
page 4 of the “Setup” screen.
3. Touch the desired color for day and/or
night map color and then touch the
“OK” switch to return the map screen.
Touch the
“Normal” switch to return to the
default map color.

cv
Screen animation
When the “Screen Animation” feature is
turned on, some switches and screens
become animated. (e.g.: change map
guidance on the map screen)
To turn the “Screen Animation” mode on:
1. Push the
“MENU” button.
2. Touch the “Setup” switch. Then
touch
switch three times to display
page 4 of the “Setup” screen.
3. Touch the “On” switch of “Screen
Animation” and touch the
“OK” switch.

cviii
Maintenance information
This system informs you when to replace
certain parts or components and shows
dealer information (if registered) on the
screen. (See “Information items” on
page cix.) When the navigation system
begins operating after either the informa-
tion item’s preset data arrives or the
driving distance reaches a predeter-
mined setting, the “Information” screen
will be displayed. This screen will appear
every time the system is turned on until
you touch the
“Do not display this
message again”
switch.
To prevent this information screen from be-
ing displayed again, touch the
“Do not
display this message again”
switch.1. Push the
“INFO” button to display
the “Information Menu” screen and
touch the
“Maintenance” switch.
5u004
2. Touch the desired icon and input the
conditions.
Notice of “Date”: You can input the next
maintenance date.
Notice of “Distance”: You can input the
driving distance until the next maintenance
check.
When you touch the
switch on the
“Maintenance” screen, the screen changes
to the “Personal Event” screen. Touch the
keys to input the desired name and then in-
put conditions.
After you input the date and/or distance,
touch the
“OK” switch. The screen then
returns to the “Maintenance” screen.
The following switches appear.
“Delete All”: To cancel all conditions which
have been inputted.

cx
(a) Register dealer
You can register the dealer name, staff,
location and phone number.
1. Touch the “Set Dealer” switch on
the “Maintenance” screen.
2. Enter the location of the dealer in the
same way as for destination input. (See
page xxx.)After you input the dealer, the screen
changes and displays the map location of
the dealer. If it is OK, touch the
“Enter”
switch.
The screen changes to “Edit Dealer” screen.
(See “(b) Edit dealer”.)

cxi
(b) Edit dealer
You can edit the dealer name, staff, loca-
tion and phone number.
1. Touch the
“Set Dealer” switch on
the “Maintenance” screen. The “Edit
Dealer” screen appears.
2. To edit, touch the corresponding
switch.
To edit “Dealer” or “Contact”
To input the name, touch the alphabet,
numeral and/or umlaut keys. You can in-
put up to 24 letters.
After inputting, touch the
“OK” switch at
the bottom right of the screen. The previous
screen will be displayed.

cxii
To edit “Location”
Set the cursor to the desired point,
and touch the
“Enter” switch on the
screen.
To edit “Phone #” (telephone number)
Touch numeral keys.
After inputting, touch the
“OK” switch. The
previous screen will be displayed.
(c) Delete dealer
1. Touch the “Delete Dealer” switch
on the screen.
2. A message will appear on the screen.
To delete, touch the
“Yes” switch. To
cancel the deletion, touch the
“No” or
“Back” switch.

cxiii
(d) Set as destination
Touch the “Enter ” switch on the “Set
Dealer” screen. The screen changes and
displays the map location of the regis-
tered dealer and the “Route Preference”.
(See
“ — Entering Destination” on page xlviii.)
Calendar with memo
This system informs you of a memo entry.
At the specified date, the memo informa-
tion will be displayed when the naviga-
tion system is in operation. The memo in-
formation screen will appear every time
the system is turned on. To disable this
screen, touch the
“Do not display
this message again”
switch.1. Push the
“INFO” button to display
the “Information Menu” screen.
5u004
2. Touch the “Calendar” switch to dis-
play the “Calendar” screen.

cxiv
The current date is circled in yellow. If the
current date is not displayed on the screen,
touch the
“Today” switch to display the
current month calendar.
(a) Inputting a memo
1. Touch the day you want to add a
memo.
2. To display the “Memo” screen, touch
the
“Add Memo” switch.
Memo
Touch the “Memo” switch to enter text.

cxvi
Mark color
Touch the “Mark” switch.
Touch your desired color for the mark.
Date color
Touch the “Date” switch.
Touch your desired color for the date.
You can set a color of the mark and/or
date for the date you added the memo
and/or location.
To default the date color, touch the
“De-
lete”
switch on the screen. After you
choose the date and/or mark color, touch
the
“OK” switch to display the previous
screen.

cxix
To display the memos listed in a desired
period, touch the
“Period” switch.
Touch the number keys.
After setting the period, touch the
“OK”switch. The “Memo list” screen will be
displayed.
You can set a period from January 1, 2003,
through December 31, 2022, for searching.
To delete and/or edit the memo, touch the
desired memo switch.
To delete all memos, touch the
“Delete
All”
switch. A message appears on the
display. To delete, touch the “Yes”
switch. To cancel the deletion, touch the“No” switch.
To edit: Touch the corresponding
“Memo” or “Location” switch. (See
page cxvii for details.)
To delete: Touch the
“Delete” switch.
(See page cxvii for details.)