power steering fluid TOYOTA PRIUS 2001 Service Repair Manual

NEW MODEL OUTLINE
MAIN MECHANISM
182CH29
16
4 Features of the 1NZ-FXE engine
1. Highly efficient and high expansion ratio gasoline engine
Adoption of a super fuel-efficient engine developed for use with THS. Its high expansion ratio cycle is achieved by applying the
Atkinson cycle*1 which obtains high thermal efficiency.
2. Reduction in frictional loss
The maximum engine speed is set at 4,500 rpm to reduce frictional resistance, thereby producing a highly efficient low-speed
engine.

An offset crankshaft with 12 mm deviation from the center axis of the cylinder bore is utilized to reduce frictional resistance
of the piston.

Frictional resistance is reduced through the use of low tension valve springs and piston rings.

Lightweight design has been adopted for reciprocating engine parts.
The above measures for reducing frictional loss contribute to improved fuel economy.
3. VVT-i (Variable Valve Timing -intelligent)
The timing of the opening and closing of the intake valves is controlled by the computer according to driving conditions, such
as engine speed and level of acceleration. Thus, smooth intake and exhaust are achieved to greatly improve torque in the low
and medium speed zones. This also contributes to better fuel economy and purification of exhaust gas. Then the VVT-i function
is used to reduce vibration when the engine starts.
4. Compact, lightweight, and low emission
Adoption of an aluminum cylinder block and compact design of parts. And, by positioning the catalytic converter near the engine
for a backwards exhaust layout, we have been able to reduce emissions when the engine is cold started.
*1 : Atkinson Cycle: Proposed by an English engineer named James Atkinson, this thermal cycle enables the compression stroke
and the expansion stroke of the mechanism to be set independently of each other.
Suspension
MacPherson strut type suspension with L-shape
lower arms has been adopted in the front and
torsion beam with toe control link suspension
in the rear. Also, each component part is opti-
mally located and tuned for both excellent con-
trollability and enhanced riding comfort.
EMPS (Electric Motor-assisted Power Steering)
System
Vehicle speed sensing type electric motor-assisted power steering is fitted as standard. Unlike conventional
hydraulic power steering, EMPS does not depend on an engine for its power source, providing a steering feel
in no way inferior to conventional steering when the engine has stopped. Thus it is suitable for the HV system.
Other merits include improved fuel economy through energy conservation, lighter weight, and no need to fill
the power steering fluid.

CHASSIS ± STEERING
182CH68
Rear Wheel
Speed SensorsBrake ECU
Torque Sensor Signal 1
Torque Sensor Signal 2
EMPS
ECUMeter ECU
Gateway ECUDLC3
Display ECU
Multi-information
Display
123
EMPS (Electric Motor-assisted Power Steering)
1. General
In accordance with sensor information such as that provided by the rear wheel speed sensors, the torque sen-
sor that is mounted on the steering gear, and the EMPS ECU determines the direction and the force of the
power assist and actuates the DC motor that is mounted on the steering gear to provide power assist to the
steering effort.
The EMPS in the Prius the following features:
This system can provide power assist even when the engine is stopped.
This system offers excellent fuel economy characteristics because power assist is provided by the DC mo-
tor that is mounted on the steering gear, and this motor consumes energy only when power assist is re-
quired.
Unlike the conventional hydraulic power steering system, this system excels in serviceability because it
does not require pipes or the power steering fluid.

System Diagram