TOYOTA PRIUS 2007 2.G Quick Reference Guide

Garage door opener (HomeLink®)
(if equipped)
Indicator
Buttons
Garage door openers manufactured under license
from HomeLink®*can be programmed to operate
garage doors, estate gates, security lighting, etc.
Refer to the Owner’s Manualfor more details.
For programming assistance, contact the To y o t a
Customer Experience Center at 1-800-331-4331, or
visit http://www.homelink.com
*HomeLink®
is a registered trademark of Johnson Controls, Inc.
BASIC HYBRID VEHICLE OPERATION
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
16
FEATURES/OPERATIONS
Lights & turn signals
Headlights
-Automatic light cutoff system* Automatically turns
off lights when the driver’s door is opened with the
Hybrid System “OFF.”
-Daytime Running Light system* Automatically
turns on the headlights at a reduced intensity.
*If equipped
Tu r n signals
Front fog lights (if equipped)
Front fog lights come on only when the headlights
are on low beam.
Window wiper & washer
Front
Rear
17
Low beamAUTO
*
Head lights
High beam
High beam flasher Parking light
Right turn
Left turn Tu r nAdjust intervalSingle wipe
Interval wipe
Wa s h and wipe
Wa s h and wipe Slow
Interval wipe Fast
Wipe Pull to wash and wipe
Lane change
Lane change

18 19
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONSSAFETY AND EMERGENCY FEATURES
FEATURES/OPERATIONS
Windows
Window operation
Automatic operation (driver side only) Push the
switch completely down or pull it completely up and
release to fully open or close. To stop window mid-
way, lightly push the switch in the opposite direction.
Window lock switch Deactivates all passenger
windows. Driver’s window remains operable.
NOTE:If 12V battery is disconnected, the
window
will need to be reinitialized. Refer to the Owner’s
Manual for more details.
Window lock
switch
Seats-Head restraints
Lock release button
Seat adjustments-Front
Seat adjustments-Rear
Up
DownLock release button FrontRear Position
(2) Fold down(1) Push down Seatback angle
Driver side
Down
Up
Tilt steering wheel
Hold wheel, push lever down, set angle and return
lever.
Note: Do not attempt to adjust while the vehicle
is in motion.
Angle
Lock release
lever
(1)(2)

BASIC HYBRID VEHICLE OPERATION
21
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
20
FEATURES/OPERATIONS
Setting a speed
System
ON/OFF
Resume
2/Increase speed
Cancel1
Set/Decrease speed
Cruise control
Passenger compartment temperature
Outside temperature
Temperature
Air flow vent
Fan speed
Automatic climate control ON
Fresh or recirculated cabin air
Rear window and outside rear view mirror
defogger
Windshield air flow
Air Conditioning ON/OFF
Climate control OFF
Display the operation screen
1
Air Conditioning/Heating
1For details, refer to the “Navigation System
Owner’s Manual.”Auto A/C ON/OFF
Temperature selector
Air intake selector
Windshield vent
Rear window and outside rear view mirror
defogger
Steering wheel switches
1The set speed may also be cancelled by depressing
the brake pedal.
2If vehicle speed falls below 25 mph, the set speed
will not be resumed.
Turning system ON/OFF
With navigation system1
Ty p e 2 functions
Ty p e 1 functions

23
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
22
FEATURES/OPERATIONS
RADIO
To preset a station Tune in the desired station and
touch a station selector icon (1-6) until you hear a
beep.
To scan for stationsPush “SCAN.” Push again to hold
selection.
CD PLAY E R
To scan tracks on a disc To u c h “SCAN” icon on the
display. Push again to hold selection.
CD changer (Ty p e 3 only)
-To load one disc Push “LOAD” and insert one disc.
-To load multiple discs Push and hold “LOAD” until
you hear a beep. Insert one disc. Shutter will close
and then re-open for
next disc.
To select a file (MP3/WMA only) Tu r n “TUNE•FILE.”
1For details, refer to theNavigation System Owner’s
Manual.
AudioAudio operation screen
Ty p e 2 additional functions
Ty p e 3 additional functions
Push
Audio
operation
screen
“-+”
Vo l u m e control
“MODE”
Push to turn audio ON and select an audio mode.
Push and hold to turn the audio system OFF.
“”switch
In radio modePush to select a preset station;
push and hold to seek the next strong station.
In CD modePush to skip up or down to
next/previous
track.
>>
Steering wheel switches
Ty p e 1 functions
Audio file search
With
navigation
system
1
Eject CDPush to turn
ON/OFF
Load CD(s)Station/CD track scan Mode
Seek station/CD track select
Audio
Seek station/CD track or
audio file selectCD/AUX mode select
Push to turn
ON/OFF

OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
24
FEATURES/OPERATIONS
Clock
AUX audio jack (if equipped)
25 Refer to the Owner’s Manualfor more details.
H-Hour set
M-Minute set
Light Control-Instrument panel
Brightness
control
+
-
Luggage storage box
Cup and bottle holders
Unlock
Unlock
Cup holder-Front Cup holder-Rear
Bottle holder
Center
console
Front door
Power outlets
Instrument panel (12V)Center console box (12V)
The Hybrid System must be in “ACC” or “IG-ON.”
Parking brake
Set: Depress
Release: Depress again

26 27
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONSSAFETY AND EMERGENCY FEATURES
27
SAFETY AND
EMERGENCY FEATURES
Emergency flashers
Note:The air vent on the right side of the rear
seatback is designed to assist in cooling the
Hybrid vehicle battery. DO NOT BLOCK OR
COVER THIS VENT, as it may cause
overheating, resulting in reduced vehicle
performance.
Rear air vent
Push
If belt is fully extended, then retracted even
slightly, it cannot be re-extended beyond that point,
unless fully retracted again. This feature is used to
help hold child restraint systems securely.
To f i n d more information about seat belts, and how
to install a child restraint system, refer to the
Owner’s Manual.
Keep as low on
hips as possible
Take up
slack
To o high
Seat belts
Moving the lever to “LOCK” will allow the door to
be opened only from the outside.
Doors-Child safety locks
Door locks
Seat belts-Shoulder belt anchor
Unlock
Rear door
Push up, or
squeeze lock
release to lower Lock
If tire pressure becomes critically low on any of the
tires (excluding compact spare), indicator comes on.
Pushing “SET” button should not turn off the light.
Correctly adjusting tire inflation will turn off the
light after a few minutes. After replacing/rotating
tire or wheels, push and hold “ SET” button until
the indicator blinks
3 times.
Refer to the Owner’s Manualfor more details.
Tire Pressure Warning System reset

28
SAFETY AND EMERGENCY FEATURES
Jump starting
Jump start terminal
Connecting jumper cables
Connect positive (red) jumper cable to the jump
start terminal.
Connect positive (red) jumper cable to the
positive (+) terminal on the booster battery.
Connect negative (black) jumper cable to the
negative (-) terminal on the booster battery.
Connect negative (black) jumper cable to the
recommended connecting point of the vehicle
with the discharged battery.
Depress
brake pedal, and press “POWER” button
to start the vehicle.
Refer to the Owner’s Manualfor more details.
The jump start terminal is in the fuse box. To access
the terminal, open the fuse block cover and the
jump start terminal cover.
Recommended
connecting point
Exclusive jump
starting
terminal cover