change time TOYOTA PRIUS 2009 2.G Navigation Manual

9
No.NameFunctionPage
6
Zoom out
touchscreen
buttonTouch this button to reduce the map
scale.32
7“Mark”
Touch this button to register the current
position or the cursor position as a
memory point.
27
8“Route”Touch this button to change the route.66, 68
9“Map View”
Touch this button to browse information
about guidance route, to set the Points
of Interest to be displayed on the
screen, or to record the route.
72, 74, 75, 76
10“ OFF”
Touch this button to obtain a broader
view. Some of the buttons on the screen
are not displayed. They are displayed
again by touching “ON”.
103
11
Zoom in
touchscreen
buttonTouch this button to magnify the map
scale.32
12
Foot print map
touchscreen
buttonTouch this button to display the foot print
map and the building information.33
13
Screen
configuration
touchscreen
button
Touch this button to change the screen
mode.30
14Distance and time
to destinationDisplays the distance, the estimated
travel time to the destination, and the
estimated arrival time at the destination.
65
15“INFO” buttonPush this button to display the “Informa-
tion” screen.11 2 , 11 6 , 1 2 6 ,
129
16“DISPLAY”
buttonPush this button to display the “Display”
screen.125
17
“GPS” mark
(Global
Positioning
System)Whenever the vehicle is receiving sig-
nals from the GPS, this mark is dis-
played.
132
18
Speech
command system
indicatorThe microphone is shown by pushing
the speech command switch. The
speech command system can be oper-
ated while this indicator is shown.
121
08/06/25 Prius_Navi_U
OM47615U

21

During auto reroute, the route guidance may not be available for the next turn \
to the
right or left.
It may take a long time to operate auto reroute during high speed driving.\
In auto re-
route, a detour route may be shown.
After auto reroute, the route may not be changed.
An unnecessary U−
turn may be shown or announced.
A location may have multiple names and the system will announce one or m\
ore.
Some routes may not be searched.
If the route to your destination includes gravel, unpaved roads or alley\
s, the route
guidance may not be shown.
Your destination point might be shown on the opposite side of the street.\
When a portion of the route has regulations prohibiting the entry of the\
vehicle that
vary by time or season or other reasons.
The road and map data stored in your navigation system may not be complete or may
not be the latest version.
After replacing a tire, implement the operation described in the “TIR\
E CHANGE
CALIBRATION”. (See page 109.)
This navigation system uses tire turning data and is designed to work with fa\
ctory −speci-
fied tires for your vehicle. Installing tires that are larger or smaller than the \
originally
equipped diameter may cause inaccurate display of the vehicle’s position. The tire pres-
sure also affects the diameter of the tires so please make sure the tire pressure of\
all four
tires is correct.
This system uses the maps of DENSO.
08/06/25 Prius_Navi_U
OM47615U
Map database informa-
tion and updates