clock setting TOYOTA PRIUS PRIME 2018 Owners Manual (in English)

PRIUS PRIME_OM_OM47C17U_(U)
1492-2. Charging
2
Plug-in hybrid system
■Timer settings
A maximum of 15 charge schedules can be registered.
■ To make sure that the charging timer function operates correctl y
Check the following items.
● Adjust the clock to the correct time ( P. 185)
● The calendar is set to the correct date ( P. 186)
● Check that the power switch is turned off
● After registering the charge schedule, connect the charging cable
The charging start time is determined based on the charge sched ule at the
time that the charging cable was connected.
● After connecting the charging cable, check that the charging indicator
flashes ( P. 106)
● Do not use an outlet that has a power cut off function (includi ng a timer func-
tion)
Use an outlet that constantly supplies electricity. For outlets where the
power is cut off due to a timer function, etc., charging may no t be carried
out according to plan if the power is cut off during the set ti me.
■ When the charging cable remains connected to the vehicle
Even if multiple consecutive charge schedules are registered, t he next
charge will not be carried out according to the timer until the charging cable is
removed and reconnected after charging completes. Also, when th e hybrid
battery (traction battery) is fully charged, charging according to the timer will
not be carried out.
■ “Climate Prep”
●When the air conditioning-linked setting is turned on, the air conditioning
operates until the set departure time. Therefore, the air condi tioning will con-
sume electricity and charging may not complete by the set depar ture time.
● If the hybrid battery (traction battery) is fully charged, char ging will not be
carried out, even if the charge schedule is set. However, if “Climate Prep” is
turned on, the air conditioning will operate only once when it nears the time
set in “Departure”. If this occurs, the air conditioning will c onsume electricity
and the remaining charge of the hybrid battery (traction batter y) when
departing may be decreased.
■ Smartphone-linked operation (vehicles with 11.6-inch display)
After applying to Entune, it is possible to use the smartphone application to
change charging timer settings.
For details about Entune, refer to http://www.toyota.com/entune/.

152
PRIUS PRIME_OM_OM47C17U_(U)
2-2. Charging
Press or of the
meter control switches to
select the charging mode/
time settings row, and then
press .
The charging mode/time set-
tings screen will display.
The clock display (12-hour dis-
play/24-hour display) changes
according to the clock settings.
(P. 185)
Press or of the
meter control switches to
select the item to change
with the cursor, and then
press or to change
the setting.
Set the desired charging mode
and charging start (or departure)
time.
When the charging mode is “Start” , this sets the charging start time.
When it is “Departure”, this sets the charging end time.
After changing the settings to the desired settings, press to return to
the previous screen.
To activate the repeated set-
ting, press or of the
meter control switches to
select “Repeat”, and then
press .
A screen where the repeated
day can be selected will display.
4
5
6

172
PRIUS PRIME_OM_OM47C17U_(U)
2-2. Charging
Refer to the following table and carry out the appropriate correction
procedure.
When charging timer function does not operate normally
Likely causeCorrection procedure
 Cannot charge at desired time
Vehicle clock is not properly
adjustedCheck the clock settings and adjust
it to the proper time. ( P. 185)
The vehicle calendar is not set cor-
rectly.Check the calendar setting and set it
to the correct date. (P. 1 8 6 )
Charging cable is not connected to
vehicleBefore using the charging timer,
connect the charging cable.
Incorrect charging mode selected
Check the charging mode setting.
( P. 1 4 7 )
When the charging mode is “Start”,
charging starts at the set time, but
when it is “Departure”, charging is
completed by the set time. (The
charging start time is automatically
controlled by the system.)
 Cannot change timer setting from smartphone application (vehicl es with
11.6-inch display)
*
Smartphone is outside its coverage
area
Check the signal strength. If the
smartphone is outside its coverage
area, move to a place with a better
signal.

180
PRIUS PRIME_OM_OM47C17U_(U)
3. Instrument cluster
Combination meter
The units used on the display may differ depending on the target region.
Main display (P. 196)
The main display shows basic information related to driving, su ch as the
vehicle speed and remaining fuel amount.
Multi-information display ( P. 205)
The multi-information display shows information which makes the vehicle
convenient-to-use, such as the hybrid system operation conditio n, electric-
ity consumption and fuel consumption history. Also, the operati on contents
of the driving support systems and the combination meter display settings
can be changed by switching to the settings screen.
Warning lights and indicators ( P. 1 8 8 )
The warning lights and indicators comes on or flashes to indica te problems
with the vehicle or to show the operation status of the vehicle ’s systems.
Clock (P. 185)
The large meter uses 2 liquid crystal displays to display infor ma-
tion such as the vehicle condition , driving status, electricity con-
sumption and fuel consumption.
Combination meter layout
1
2
3
4

PRIUS PRIME_OM_OM47C17U_(U)
1853. Instrument cluster
3
Instrument cluster
To adjust the time, perform operations on the screen (P. 2 3 1 )
of the multi-information display.
■Adjusting the time
Press or of the meter control switches on the
screen and select .
Press to display the cursor.
Press or of the
meter control switches to
adjust the cursor position,
and then press or to
change the setting.
When the 12-hour display is
selected, “12H” is displayed,
and when the 24-hour display is
selected, “24H” is displayed.
When adjusting minutes, operation automatically starts from 00 sec-
onds.
After changing the settings, press to return to the previous s creen.
■
Resetting the minutes display
Press or of the
meter control switches on the
screen and select
.
Press .
The minutes display switches to “00”.*
*
: e.g. 1:00 to 1:29  1:00
1:30 to 1:59  2:00
Clock adjustment
1
2
3
1
2

186
PRIUS PRIME_OM_OM47C17U_(U)
3. Instrument cluster
■The meters and display illuminate when
The power switch is in ON mode.
■ Adjusting the instrume nt cluster brightness (P. 182)
● The brightness levels that can be selected differ depending on whether the
tail lights are on and surrounding brightness levels, as shown in the table
below.
*: 22 levels of the brightness are displayed on the setting scree n. However,
the brightness setting will be the brightest when other than 1st level (the
darkest) is selected. If other than 1st or 22nd level is select ed, when the
tail lights are turned on in a dark place, the instrument clust er brightness
setting will be the selected level.
● If the taillights are illuminated in a dark environment, the in strument cluster
light dims. However, when the brightness of the instrument clus ter is set to
minimum or maximum (1st or 22nd level of the instrument cluster bright-
ness), even if the taillights are illuminated, the instrument c luster light will
not dim.
■ When disconnecting and reconnecting 12-volt battery terminals
The settings of the clock will be reset.
■ Calendar setting
●Until the calendar setting is completed, the check screen is di splayed every
time the power switch is turned to ON mode.
● After the calendar information is set, it can be changed in the “Meter Cus-
tomize” settings. ( P. 233)
The tail lights are offThe tail lights are on
In a bright place2 levels*2 levels*
In a dark place22 levels
If calendar recording is interrupted due to
replacement of the 12-volt battery or 12-
volt battery discharge, etc., when the
power switch is turned to ON mode after
maintenance, the calendar setting check
screen is automatically displayed on the
multi-information display.
● If date information is not set, the electric-
ity and fuel consumption record cannot
be stored correctly. Also, the charge
timer function can not operate properly.
When the calendar setting check screen
is displayed, make sure to complete the
calendar setting. ( P. 231)

232
PRIUS PRIME_OM_OM47C17U_(U)
3. Instrument cluster
■Settings table
ItemSettingsSetting result
“On” Turns the LDA system steering control
function on and off. ( P. 390)
“Off”
“High”Switches the LDA system lane deviation
sensitivity. (P. 390)
“Standard”
“On”
Turns the PCS (Pre-Collision System) on
and off. ( P. 373)
“Off”
Far
Switches the PCS (Pre-Collision System)
warning timing. ( P. 373)Middle
Near
*“On”Turns the Intuitive parking assist on and off.
(P. 420)
“Off”
*“On”Turns the Intelligent Clearance Sonar on
and off. ( P. 431)
“Off”
*“On”Turns the Blind Spot Monitor on and off.
(P. 409)
“Off”
“On”
Turns the LDA system vehicle sway warn-
ing on and off. ( P. 390)
“Off”
“High”
Switches the LDA system vehicle sway
warning sensitivity. ( P. 390)“Standard”
“Low”
Clock setting
Adjusts the clock. (P. 185)
Sets the minutes to “00”. ( P. 185)

328
PRIUS PRIME_OM_OM47C17U_(U)
5-2. Driving procedures
■Meter display
When the power switch is turned off, each display will turn off as follows.
● The shift position indicator will turn off after approximately 2 seconds.
● The multi-information display, clock, etc. will turn off after approximately 30
seconds.
(Each display will also turn off immediately if a door is locke d before 30 sec-
onds has elapsed.)
■ If the smart key system has been d eactivated in a customized setting
P. 695
WARNING
■ When starting the hybrid system
Always start the hybrid system while sitting in the driver’s se at. Do not
depress the accelerator pedal while starting the hybrid system under any
circumstances.
Doing so may cause an accident resulting in death or serious in jury.
■ Stopping the hybrid system in an emergency
● If you want to stop the hybrid system in an emergency while dri ving the
vehicle, press and hold the power switch for more than 2 second s, or
press it briefly 3 times or more in succession. ( P. 649)
However, do not touch the power switch while driving except in an emer-
gency. Turning the hybrid system off while driving will not cau se loss of
steering or braking control, however, power assist to the steer ing will be
lost. This will make it more difficult to steer smoothly, so yo u should pull
over and stop the vehicle as soon as it is safe to do so.
● If the power switch is operated while the vehicle is running, a warning
message will be shown on the multi-information display and a bu zzer
sounds.
● When restarting the hybrid system after an emergency shutdown w hile
driving, press the power switch. When restarting the hybrid sys tem after
stopping the vehicle, change the shift position to P and then press the
power switch.

778Alphabetical index
PRIUS PRIME_OM_OM47C17U_(U)
Language (multi-information display)................................... 233
LATCH system ........................... 60
LDA (Lane Departure Alert with steering control)............ 381
Lever Auxiliary catch lever .............. 581
Hood lock release lever ........ 581
Shift lever .............................. 330
Tilt and telescopic steering lock release lever ............... 294
Turn signal lever ................... 336
Wiper lever............................ 350
License plate lights ................. 338
Light switch ........................... 338
Replacing light bulbs............. 644
Light
Automatic High Beam system ......... ....................... 343
Door courtesy lights .............. 516
Emergency flasher switch ..... 648
Fog light switch ..................... 348
Headlight switch.................... 338
Illuminated entry system ....... 518
Interior lights ................. 517, 518
Interior light list...................... 516
Luggage compartment
light ..................................... 274
Personal lights ...................... 517
Replacing light bulbs............. 639
Shift lever light ...................... 516
Turn signal lever ................... 336
Vanity lights .......................... 531
Wattage ................................ 721
Light bulbs Replacing .............................. 639
Wattage ................................ 721
Load capacity........................... 321
Luggage cover ......................... 526 Main display ............................. 196
Maintenance
Do-it-yourself maintenance... 578
General maintenance ........... 574
Maintenance data ................. 712
Maintenance requirements ... 571
Malfunction indicator lamp..... 657
Master warning light ............... 667
Meter ......................................... 180 Clock adjustment .................. 185
Combination meter ............... 180
Head-up display.................... 238
Indicators .............................. 191
Instrument cluster light control ................................ 182
Main display.......................... 196
Multi-information display ....... 205
Warning lights ....................... 189
Warning messages ............... 667
Microphone
*............................ 552
Mirrors Inside rear view mirror .......... 296
Outside rear view mirror defoggers ................... 492, 503
Outside rear view mirrors ..... 298
Vanity mirrors ....................... 531
MP3 disc
*
Multi-information display........ 205
Air conditioning system settings screen ................... 226
Audio system-linked display ................................ 225
BSM (Blind Spot Monitor) ..... 408
Display contents ................... 205
Drive information .................. 207
Driving assist system
information ......................... 230
Dynamic radar cruise control with full-speed range .......... 391
LM