mass air flow TOYOTA RAV4 1996 Service Repair Manual

Fig. 13: Exhaust Valve Lifter Selection Chart (Corolla)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Tacoma & 4Runner
1. Remove air cleaner hose along with upper cap on air cleaner and mass airflow meter. Remove intake air
connector for access to valve cover. Intake air connector fits between air cleaner hose and throttle body.
2. Disconnect spark plug wires from spark plugs. Disconnect engine wiring, clamps and PCV hose for
access to valve cover. Remove bolts, seal washers, valve cover and gasket.
3. Rotate crankshaft clockwise until crankshaft pulley timing mark (groove) aligns with "0" mark on timing
chain cover and cylinder No. 1 is at TDC on compression stroke. Cylinder No. 1 is front cylinder at
timing chain end of engine.
4. Ensure 1-dot and 2-dot timing marks on camshaft sprockets are aligned. See Fig. 14
. If timing marks are
not aligned, rotate crankshaft clockwise one full revolution (360 degrees) and realign crankshaft pulley
timin
g mark (groove) with "0" mark on timing chain cover.

1999 Toyota RAV4
1999 ENGINE PERFORMANCE On-Vehicle Adjustments - 4-Cylinder
Microsoft
Sunday, November 22, 2009 10:25:31 AMPage 15 © 2005 Mitchell Repair Information Company, LLC.