sensor TOYOTA SEQUOIA 2001 Service Repair Manual

DI±1822
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
2016 Author: Date:
2005 SEQUOIA (RM1146U) CTYB e PCYL
(5 e 6)
R e R±WDoor courtesy
light (Front RH)Front passenger's door openBelow 1 V
PVC e RE1
(11 e 12)GR±B e GR±
ROuter mirror
position sensorIgnition switch OFFBelow 1 V
PVC e RE1
(11 e 12)GR±B e GR±
ROuter mirror
position sensorIgnition switch ON4.8 to 5.2 V
VSSR e RE1
(18 e 12)GR±G e GR±
ROuter mirror
position sensorIgnition switch ON, outer mirror position full OUT0.5 to 1.8 V
VSSR e RE1
(18 e 12)GR±G e GR±
ROuter mirror
position sensorIgnition switch ON, outer mirror position full IN3.5 to 4.5 V
HSSR e RE1
(19 e 12)GR±L e GR±
ROuter mirror
position sensorIgnition switch ON, outer mirror position full DOWN0.5 to 1.8 V
HSSR e RE1
(19 e 12)GR±L e GR±
ROuter mirror
position sensorIgnition switch ON, outer mirror position full UP3.5 to 4.5 V
PM+R e GND
(15 e 13)L±W e W±BOuter mirror mo-
torRemote control mirror is not operatedBelow 1 V
PM+R e GND
(15 e 13)L±W e W±BOuter mirror mo-
torRemote control mirror is operated DOWN or RIGHT10 to 14 V
PMVR e GND
(17 e 13)LG±B e W±BOuter mirror mo-
torRemote control mirror is not operatedBelow 1 V
PMVR e GND
(17 e 13)LG±B e W±BOuter mirror mo-
torRemote control mirror is operated UP or RIGHT10 to 14 V
PMHR e GND
(16 e 13)LG±R e W±BOuter mirror mo-
torRemote control mirror is not operatedBelow 1 V
PMHR e GND
(16 e 13)LG±R e W±BOuter mirror mo-
torRemote control mirror is operated LEFT or DOWN10 to 14 V

DIDEU±01
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1823
2017 Author: Date:
2005 SEQUOIA (RM1146U)
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
According to the DATA LIST displayed by the hand±held tester, you can read the value of the switch, sensor,
actuator and so on without parts removal. Reading the DATA LIST as the first step of troubleshooting is one
of the methods to shorten labor time.
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch ON.
(c) According to the display on the tester, read the DATA LIST.
P±DOOR:
ItemMeasurement Item/Dis-
play (Range)Normal conditionDiagnostic Note
P P/W AUTO SW
Front passenger power
window auto SW signal/
ON or OFFON: Front passenger power window auto UP/DOWN SW
is ON
OFF: Front passenger power window auto UP/DOWN SW
is OFF
±
LIMIT SWJam protection limit SW/
ON or OFFON: Window is almost fully open
OFF: Window is open*1
LOCK POS SWLock position SW signal/
ON or OFFON: Door lock is in unlock position
OFF: Door lock is in lock position±
*1: If the jam protection limit switch is turned ON, the jam protection function will stop.
Even if the switch is not turned ON when the windows are almost fully open, the window will not fully close
as jam protection operates at upper window positions during automatic±up operation.
HINT:
The following data list can be used when the power window is operated through manual±up operation during
the ACTIVE TEST.
ItemMeasurement Item/Display (Range)Normal conditionDiagnostic Note
GRASS POS±1/4
Detects things caught in the P/W / OK or
CAUTION
(Displayed during the active test)OK: Nothing caught in the range between
closed and 1/4 open*2
GRASS POS±1/2
Detects things caught in the P/W / OK or
CAUTION
(Displayed during the active test)OK: Nothing caught in the range between
1/4 open and 1/2 open*2
GRASS POS±3/4
Detects things caught in the P/W / OK or
CAUTION
(Displayed during the active test)OK: Nothing caught in the range between
1/2 open and 3/4 open*2
GRASS POS±OPEN
Detects things caught in the P/W / OK or
CAUTION
(Displayed during the active test)OK: Nothing caught in the range between
3/4 open and fully open*2
HINT:
*2: If the CAUTION is displayed without applying any resistance in each range, there must be something
caught somewhere in that range.
ItemMeasurement Item/Display (Range)Normal conditionDiagnostic Note
MIR POS SEN VVertical mirror position/Min.: 0, Max.: 5Within range from 0 to 5 V±
MIR POS SEN HVertical mirror position/Min.: 0, Max.: 5Within range from 0 to 5 V±

DI1PS±08
I28391
Power Window Motor

Pulse Sensor

Limit Switch
Door Courtesy Light Switch Power Window Switch Assembly

Passenger Door ECU

Door Lock Control Switch

Power Window Switch
Door Courtesy Light
Passenger door ECU is the same with Power Window Switch
Door Lock Assembly

Door Lock Motor

Door Unlock Detection
Switch Remote Control Mirror
(w/ Driving Position Memory)
Door Key Lock and
Unlock Switch
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1825
2019 Author: Date:
2005 SEQUOIA (RM1146U)
PARTS LOCATION

I28442
W±B
L±R 5
3 Pulse SensorSGND
PLS 18
17Front Passenger
Door ECU P7
Power Window Motor
Front RH
*1: w/ Driving Position Memory
*2: w/o Driving Position MemoryF18
F18
(*1) (*2)4
3
F18
F18
(*1) (*2)
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1841
2035 Author: Date:
2005 SEQUOIA (RM1146U)
Jam protection pulse sensor circuit
CIRCUIT DESCRIPTION
The jam protection pulse sensor, built in the power window motor, outputs a ON/OFF pulse when the motor
rotates.
WIRING DIAGRAM
DI1QD±07

DI±1842
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
2036 Author: Date:
2005 SEQUOIA (RM1146U)
INSPECTION PROCEDURE
1 Check the jam protection pulse sensor circuit using DTC check (See page
DI±1904).
CHECK:
Check if DTC B1234 of the multiplex communication system is output.
OK:
DTC is not output.
OK Proceed to next circuit inspection shown in
problem symptoms table (See page DI±1818).
NG
2 Check jam protection pulse sensor (See page BE±69).
NG Replace the power window motor.
OK
3 Check wire harness and connector between jam protection pulse sensor and
passenger door ECU (See page IN±35).
NG Repair or replace wire harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table
(See page DI±1818).

I28444
R18
Remote Control Mirror RHFront Passenger Door ECU
PM+R
PMVR
PMHR F1815
17
16 L±W
LG±B
LG±R 7
6
8 M+
MV
MHF18
F18
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1845
2039 Author: Date:
2005 SEQUOIA (RM1146U)
Remote control mirror motor RH circuit (w/ Driving position
memory)
CIRCUIT DESCRIPTION
SEQUOIA features a driving position memory function, and up to 2 driver positions can be memorized.
The passenger door ECU operates 2 motors built into the remote control mirror. The motors move the mirror
to the memorized positions based on information from the position sensor.
WIRING DIAGRAM
DIDEV±01

I28445
R18
Remote Control Mirror RHFront Passenger
Door ECU
VDD
SV
SH
GNDPVC
VSSR
HSSR
RE1 9
16
10
1511
18 F18
19
12 GR±B
GR±G
GR±L
GR±RF18
F18
F18
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1847
2041 Author: Date:
2005 SEQUOIA (RM1146U)
Remote control mirror position sensor RH circuit (w/ Driving posi-
tion memory)
CIRCUIT DESCRIPTION
SEQUOIA features a driving position memory function, and up to 2 driver positions can be memorized.
The passenger door ECU operates 2 motors built into the remote control mirror. The motors move the mirror
to the memorized positions based on information from the position sensor.
WIRING DIAGRAM
DIDEW±01

DI±1848
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
2042 Author: Date:
2005 SEQUOIA (RM1146U)
INSPECTION PROCEDURE
1 Check remote control mirror position sensor (See page DI±1819).
NG Replace outer mirror.
OK
2 Check wire harness and connector between remote control mirror position sen-
sor and driver door ECU (See page IN±35).
NG Repair or replace harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table
(See page DI±1818).

DID9G±01
I28586
From
Battery
From
Battery
From
Battery
From
DOME
FuseBack Door ECU
PWR No. 5
IG Switch
Luggage Room Light
BODY ECUECU±B
ECU±IG
Back Door Key Lock and Unlock Switch
Back Door Lock Assy
Back Door Unlock
Detection Switch
Back Door Courtesy
Light Switch
Back Door
Lock MotorDOOR
ONBRD
BECU
SIG
LGLP
ILE
BKUL
BKL
KEYE
LSWB
LSWE
BDCY
CTYE
ACT+
ACT±WIP+
WIP±
W
P
SGND
BDDN
BDUP
DSV
DS1
DS2
DSGBEAN
Driver Door
ECU
Rear Wiper Motor
Wiper
Motor
Reverse Position SW
String Position SW
Back Door Power Window Motor
Window
Motor
*1: Pulse Sensor*1*1 A/C ECU BEANBEAN
BEAN
± DIAGNOSTICSBACK DOOR CONTROL SYSTEM
DI±1851
2045 Author: Date:
2005 SEQUOIA (RM1146U)
SYSTEM DIAGRAM

DI57H±07
DI±1854
± DIAGNOSTICSBACK DOOR CONTROL SYSTEM
2048 Author: Date:
2005 SEQUOIA (RM1146U)
PROBLEM SYMPTOMS TABLE
REAR WIPER AND WASHER
SymptomSuspected AreaSee page
Rear wiper does not operate.
1. Wiper switch circuit
2. Rear wiper motor circuit
3. Rear wiper limit switch circuit
4. Back door power window pulse sensor circuit
5. Body ECU
6. Back door ECUDI±1704
DI±1880
DI±1885
DI±1877
IN±35
IN±35
Rear washer does not operate.1. Washer switch and washer motor circuit
2. Body ECUDI±1704
IN±35
Wiper does not operate when washer switch is ON.1. Wiper switch and washer motor circuit
2. Body ECUDI±1704
IN±35
OTHERS
SymptomSuspected AreaSee page
Back door power window does not operate.
1. Back door power window switch circuit
2. Back door power window pulse sensor circuit
3. Back door power window motor circuit
4. Body ECU
5. Back door ECUDI±1718
DI±1877
DI±1874
IN±35
IN±35
Back door lock does not operate.
1. Back door key lock and unlock switch circuit
2. Back door lock motor circuit
3. Back door unlock detection switch circuit
4. Back door courtesy light switch circuit
5. Back door key lock and unlock switch circuit
6. Back door ECUDI±1882
DI±1872
DI±1869
DI±1864
DI±1882
IN±35
Luggage room light does not come on.
1. Luggage room light circuit
2. Back door courtesy light switch circuit
3. Body door ECUDI±1867
DI±1864
IN±35
Whole functions of the back door control system do not operate.1. Power source circuit
2. Back door ECUDI±1861
IN±35