TOYOTA SOLARA 2008 Owners Manual (in English)

’08 Solara_U (L/O 0802)
203
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
The system may not function in the follow-
ing cases:
If the current number is not correct.
If the phone book has already been
locked.
If the PIN number does not exist.
To unlock the phone book
1. Push the talk switch and say [Phone book unlock], or turn the “AUDIO CON-
TROL” knob until [Phbk Unlock] is dis-
played and push the knob.
[Phonebook unlock. There is a PIN num-
ber in place. Push the talk switch and say
the correct PIN number.] is heard and
[Current PIN?] is displayed. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob to
select a number. When using a voice command:
[XXXX (PIN number) Push the talk switch
and say confirm. Otherwise, say go back.]
is heard and the PIN number is displayed.
Follow voice guidance instructions, or turn
the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the knob.
[PIN number accepted. The phone book is
now unlocked. Returning to the main
menu.] is heard and [Unlocked] is dis-
played.
When using the knob:
1. Turn the “AUDIO CONTROL” knob to select a number. Push the “AUDIO
CONTROL” knob to set.
2. When the PIN number is set, push the “AUDIO CONTROL” knob.
[XXXX Push the talk switch and say con-
firm. Otherwise, say go back.] is heard
and the PIN number is displayed. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[PIN number accepted. The phone book is
now unlocked. Returning to the main
menu.] is heard and [Unlocked] is dis-
played. The system may not function in the follow-
ing cases:
If the current number is not correct.
If the phone book has already been
unlocked.
INFORMATION
A shortcut to each of the following
functions is available. Enter the
phone book menu, push the offhook
switch, and say either of the follow-
ing:
Phone book lock
Phone book unlock

’08 Solara_U (L/O 0802)
204
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
The system setup menu includes the fol-
lowing:
Adjust Guidance Volume
Initialize
To enter the system setup menu
1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Setup] is displayed and push the knob.
3. Turn the “AUDIO CONTROL” knob until [System Setup] is displayed and push
the knob.
[System setup. Please select guidance
volume or initialize.] is heard.
To adjust the guidance volume 1. Turn the “AUDIO CONTROL” knob until [Guidance Vol] is displayed and push
the knob.
[Guidance will be at this volume] is heard
and the present volume level is displayed. 2. Turn the “AUDIO CONTROL” knob to adjust the volume and push the knob. To initialize
1. Turn the “AUDIO CONTROL” knob until [Initialize] is displayed and push the
knob.
[System initialization. This will erase all
user information in the hands free system;
including paired phones, phone book en-
tries, and call history. Select confirm to
initialize. Otherwise, select go back.] is
heard. 2. Turn the “AUDIO CONTROL” knob until [Confirm] is displayed and push the
knob.
[System initialization. This will erase all
user information in the hands free system;
including paired phones, phone book en-
tries, and call history. Select confirm to
initialize. Otherwise, select go back.] is
heard. 3. Turn the “AUDIO CONTROL” knob until [Confirm] is displayed and push the
knob.
[Initialized. Returning to the main menu.]
is heard. The phone book menu includes the follow-
ing:
Add Entry
Phone numbers and voice tags can be
registered.
Change Name
The registered names can be changed.
Delete Entry
The registered names can be deleted.
Delete Speed Dial
The registered speed dial can be deleted.
List Names
The registered names can be checked.
Set Speed Dial
Speed dials can be set.
Up to 20 numbers can be registered in
the phone book.
—System Setup —Phone Book

’08 Solara_U (L/O 0802)
205
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
To enter the phone book menu1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Phonebook] is displayed and push the
knob.
[Phone book. Please push the talk switch
and say add entry, change name, delete
entry, list names, set speed dial or delete
speed dial.] is heard.
If the phone book is locked, the system
may not function properly. To add entry
The add entry includes the following:
(a) By Voice
(b) By Phone
(c) Call History
(d) Manual Input
Push the talk switch and say [Add entry],
or turn the “AUDIO CONTROL” knob until
[Add Entry] is displayed and push the
knob.
[Add Entry. How will the number be en-
tered. Push the talk switch and say by
voice, by phone, or call history.] is heard.(a) By voice
1. Push the talk switch and say [By voice], or turn the “AUDIO CONTROL”
knob until [By Voice] is displayed and
push the knob.
[Voice entry. Push the talk switch and say
the number.] is heard. 2. Push the talk switch and say the dial number that you want to register.
[To store, push the talk switch and say
confirm. Otherwise, continue adding num-
bers, or say go back, or delete.] is heard
and number is displayed. 3. Follow voice guidance instructions.

’08 Solara_U (L/O 0802)
206
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
If [Confirm] is said, then input a voice
tag.
[Push the talk switch and say a name.] is
heard.1. Push the talk switch and say the name of the dial number that you want to
register.
[XXXX (phone number) Push the talk
switch and say confirm. Otherwise, say go
back.] is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Stored. To register this as a speed dial
entry, push the talk switch and say set
speed dial. Otherwise, say confirm.] is
heard and [Stored] is displayed. 3. Select one of the following:
Confirm
Speed Dial Confirm
Push the talk switch and say [Confirm], or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the knob.
[Returning to the phone book.] is heard.
Speed Dial
1. Push the talk switch and say [Set speed dial], or turn the “AUDIO CON-
TROL” knob until [Speed Dial] is dis-
played and push the knob.
[Set speed dial. Push the preset button to
assign to XXXX] is heard. 2. Push and hold the desired preset but- ton.
[preset... is now assi gned. Returning to
the phone book.] is heard.
The system may not function in the follow-
ing cases:
If the phone book is full.
If the dial number has more than 24
digits. (b) By Phone
1. Push the talk switch and say [By phone], or turn the “AUDIO CONTROL”
knob until [By Phone] is displayed and
push the knob.
[Phone entry. Prepare to send the informa-
tion from the phone. When ready, push
the talk switch and say confirm.] is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Send the information at this time.] is
heard.
After the system has received the name
and phone number, [Push the talk switch
and say confirm. To select an alternate
number, say next or previous. Otherwise,
say go back.] is heard and the name and
phone number are displayed. 3. Follow voice guidance instructions, push the talk switch and say [Confirm],
or turn the “AUDIO CONTROL” knob
until the dial number that you want to
register is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 205.

’08 Solara_U (L/O 0802)
207
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
(c) Call History1. Push the talk switch and say [Call his- tory], or turn the “AUDIO CONTROL”
knob until [Call History] is displayed
and push the knob.
[Call history. Push the talk switch and say
incoming or outgoing.] is heard and [Call
History] is displayed. 2. Select one of the following:
Incoming
Outgoing
Incoming
1. Push the talk switch and say [Incom- ing], or turn the “AUDIO CONTROL”
knob until [Incoming] is displayed and
push the knob.
[Most recent incoming call was XXXX
(phone number)] is heard and the incom-
ing number is displayed.
[Push the talk switch and say confirm.
Otherwise, say previous, or go back.] is
heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the dial number that you want to regis-
ter is displayed and push the knob.
Next, input a voice tag.
For further details, see page 205. Outgoing
1. Push the talk switch and say [Outgo- ing], or turn the “AUDIO CONTROL”
knob until [Outgoing] is displayed and
push the knob.
[Most recent outgoing call was XXXX] is
heard and the outgoing number is dis-
played.
[Push the talk switch and say confirm.
Otherwise, say previous, or go back.] is
heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the dial number that you want to regis-
ter is displayed and push the knob.
Next, input a voice tag.
For further details, see page 205. (d) Manual Input
1. Turn the “AUDIO CONTROL” knob until [Manual Input] is displayed and push
the knob.
2. Turn the “AUDIO CONTROL” knob to select a number. Push the “AUDIO
CONTROL” knob to set.
3. When the number is set, push the “AUDIO CONTROL” knob.
Next, input a voice tag.
For further details, see page 205.
INFORMATION
The system can recognize single
digits from zero to nine, #(pound),
*(star), and +(plus). Numbers that
are ten or greater are not recog-
nized.
To speed up input, it is a good idea
to group all digits into a continuous
string. However, you can enter each
digit individually or group digits to-
gether in preferred string lengths.
The display corresponding to each op-
eration appears on the screen as fol-
lows:

’08 Solara_U (L/O 0802)
208
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
Input operation—
You say: [Nine, nine, five]
Voice output: [995 to store push the
talk switch and say confirm. Other-
wise, continue adding numbers, or
say go back, or delete.]
Display: [995]
You say: [Seven, three, four]
Voice output: [734 to store push the
talk switch and say confirm. Other-
wise, continue adding numbers, or
say go back, or delete.]
Display: [995734]
Repeat the above procedure until the
entire number that you want to regis-
ter is input.
Go back operation—
You say: [Go back]
Voice output: [Go back. The last num-
bers said have been removed. Push
the talk switch and say the number.]Display: [995]
Repeating the above operation deletes
the last digits in reverse order of in-
put.
Delete operation—
You say: [Delete]
Voice output: [Deleted. Push the talk
switch and say the number.]
Display: [Delete]
The display will return to the initial
screen that allows a number to be
input.To list names
The voice tags can be edited during the
name playback.1. Push the talk switch and say [List names], or turn the “AUDIO CONTROL”
knob until [List Names] is displayed
and push the knob.
[List names. To select a name, push the
talk switch during the name playback.] is
heard. 2. Follow voice guidance instructions.
[XXXX selected.] is heard and [Selected]
is displayed.
If you push the off −hook switch during the
name playback, you can dial the number
of the selected name.

’08 Solara_U (L/O 0802)
209
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
Editing the voice tags
The following can be performed:
Dial
Change Name
Delete Entry
Speed Dial
[Push the talk switch and say dial, change
name, delete entry, or set speed dial.] is
heard and [Selected] is displayed.
Dial
Push the talk switch and say [Dial], or
turn the “AUDIO CONTROL” knob until
[Dial] is displayed and push the knob.
Change Name
Push the talk switch and say [Change
name], or turn the “AUDIO CONTROL”
knob until [Change Name] is displayed
and push the knob.
For further details, see page 210. Delete Entry
Push the talk switch and say [Delete
entry], or turn the “AUDIO CONTROL”
knob until [Delete Entry] is displayed and
push the knob.
For further details, see page 209.
Speed dial
Push the talk switch and say [Set speed
dial], or turn the “AUDIO CONTROL” knob
until [Speed Dial] is displayed and push
the knob.
For further details, see page 211.
To delete entry
1. Push the talk switch and say [Delete entry], or turn the “AUDIO CONTROL”
knob until [Delete Entry] is displayed
and push the knob.
[Delete entry. Push the talk switch and
say the name to delete.] is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the name that you want to delete is
displayed and push the knob.
When using a voice command:
[XXXX (name) Push the talk switch and
say confirm. Otherwise, say go back.] is
heard and the name is displayed.
Follow voice guidance instructions, or turn
the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the knob.
[Deleted. Returning to the phone book.] is
heard and [Deleted] is displayed.
When using the knob:
[Deleted. Returning to the phone book.] is
heard and [Deleted] is displayed.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.

’08 Solara_U (L/O 0802)
210
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
To delete speed dial1. Push the talk switch and say [Delete speed dial], or turn the “AUDIO CON-
TROL” knob until [Del Spd Dial] is dis-
played and push the knob.
[Delete speed dial. Push the preset button
to delete from speed dial.] is heard. 2. Select the preset button that you want to delete.
[To delete preset... push the talk switch
and say confirm. Otherwise, say go back.]
is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Deleted.] is heard and [Deleted] is dis-
played.
[Returning to the phone book.] is heard.
The system may not function in the follow-
ing cases:
If no speed dial has been registered.
If the preset button has not been as-
signed. To change name
1. Push the talk switch and say [Change name], or turn the “AUDIO CONTROL”
knob until [Change Name] is displayed
and push the knob.
[Change name. Push the talk switch and
say the name to change.] is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the dial number that you want to
change is displayed and push the
knob. When using a voice command:
[XXXX (phone number) Push the talk
switch and say confirm. Otherwise, say go
back.] is heard and the phone number is
displayed.
1. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Push the talk switch and say a new
name.] is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Record Name] is displayed, push the
knob and say new name.
[XXXX Push the talk switch and say con-
firm. Otherwise, say go back.] is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Name changed. Returning to the phone
book.] is heard and [Changed] is dis-
played.

’08 Solara_U (L/O 0802)
211
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
When using the knob:
[Push the talk switch and say a new
name.] is heard.1. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Record Name] is displayed, push the
knob and say new name.
[XXXX Push the talk switch and say con-
firm. Otherwise, say go back.] is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Name changed. Returning to the phone
book.] is heard and [Changed] is dis-
played.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command. To set speed dial
1. Push the talk switch and say [Set Speed dial], or turn the “AUDIO CON-
TROL” knob until [Speed Dial] is dis-
played and push the knob.
[Set speed dial. Push the talk switch and
say a name.] is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the dial number that you want to regis-
ter is displayed and push the knob. When using a voice command:
[XXXX (phone number) To register this as
a speed dial entry, push the talk switch
and say confirm. Otherwise, say go back.]
is heard and the phone number is dis-
played.
1. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Push the preset button to assign to
XXXX] is heard. 2. Push and hold the desired preset but- ton.
[preset... is now assi gned. Returning to
the phone book.] is heard.
When using the knob:
[Push the preset button to assign to
XXXX] is heard.
Push and hold the desired preset button.
[preset... is now assi gned. Returning to
the phone book.] is heard.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.

’08 Solara_U (L/O 0802)
212
2008 CAMRY SOLARA from Feb. ’08 Prod. (OM33810U)
INFORMATION
A shortcut to each of the following
functions is available. Push the off
hook switch and talk switch, and say
one of the following:
Phone book add entry
Phone book change name
Phone book delete entry
Phone book delete speed dial
Phone book list names
Phone book set speed dial
The following can be performed:
Dial
Delete
Store
To enter the redial 1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Redial] is displayed and push the
knob.
[Redial. Most recent outgoing call was
XXXX (phone number)] is heard and out-
going history is displayed.
[Please push the off −hook switch to dial.
Otherwise, push the talk switch and say
dial, previous, go back, store, or delete.]
is heard. Dial
Turn the “AUDIO CONTROL” knob until
the number that you want to dial is dis-
played and push the knob. After that, do
the one of the following:
Push the off
−hook switch.
Push the talk switch and say [dial].
Turn the “AUDIO CONTROL” knob until
[Dial] is displayed and push the knob.
Delete
1. Turn the “AUDIO CONTROL” knob until the dial number that you want to delete
is displayed and push the knob.
2. Push the talk switch and say [Delete], or turn the “AUDIO CONTROL” knob
until [Delete] is displayed and push the
knob.
[Delete. Push the talk switch and say con-
firm. Otherwise, say go back] is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Deleted.] is heard.
—Redial