TOYOTA SUPRA 1997 Service Repair Manual

SF0HI-01
P11345
Solenoid Resistor
AssemblyCover
Solenoid Resistor
Bracket
Solenoid
Resistor
Connector SF-56
- SFI (2JZ-GTE)SOLENOID RESISTOR
1382 Author
: Date
:
1997 SUPRA (RM502U)
SOLENOID RESISTOR
COMPONENTS

SF0HJ-01
P11451
Ohmmeter#20
#30
#40
#50#10
#60+B
- SFI (2JZ-GTE)SOLENOID RESISTOR
SF-57
1383 Author
: Date
:
1997 SUPRA (RM502U)
INSPECTION
1. DISCONNECT SOLENOID RESISTOR CONNECTOR
2. INSPECT SOLENOID RESISTOR
Using an ohmmeter, measure the resistance between terminal
+B and other terminals.
Resistance: Approx. 6 W at 20°C (68°F)
If the resistance is not as specified, replace the resistor.
3. RECONNECT SOLENOID RESISTOR CONNECTOR

SF0HK-01
P11478
Vacuum Sensing Hose
VSV
VSV Connector
Vacuum Sensing Hose SF-58
- SFI (2JZ-GTE)VSV FOR FUEL PRESSURE CONTROL
1384 Author
: Date
:
1997 SUPRA (RM502U)
VSV FOR FUEL PRESSURE CONTROL
COMPONENTS

SF0HL-01
P11340
Ohmmeter
Continuity
P11341
Ohmmeter
No Continuity
P11342
Air
E
G
P11343
Air
E
Filter Battery
- SFI (2JZ-GTE)VSV FOR FUEL PRESSURE CONTROL
SF-59
1385 Author
: Date
:
1997 SUPRA (RM502U)
INSPECTION
1. REMOVE VSV
2. INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 33 - 39 W at 20°C (68°F)
If there is no continuity, replace the VSV.
3. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
4. INSPECT VSV OPERATION
(a) Check that air flows from port E to G.
(b) Apply battery positive voltage across the terminals.
(c) Check that air flows from port E to the filter.
If operation is not as specified, replace the VSV.
5. REINSTALL VSV

SF0HM-01
P11421
Air HoseVSV Connector
VSV SF-60
- SFI (2JZ-GTE)VSV FOR INTAKE AIR CONTROL VALVE
1386 Author
: Date
:
1997 SUPRA (RM502U)
VSV FOR INTAKE AIR CONTROL VALVE
COMPONENTS

SF0HN-01
P11371
Ohmmeter
Continuity
P11372
Ohmmeter
No Continuity
P11414
Air
EFilter
P11373
Air
EBattery
F
- SFI (2JZ-GTE)VSV FOR INTAKE AIR CONTROL VALVE
SF-61
1387 Author
: Date
:
1997 SUPRA (RM502U)
INSPECTION
1. REMOVE VSV
2. INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 38.5 - 44.5 W at 20°C (68°F)
If there is no continuity, replace the VSV.
3. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
4. INSPECT VSV OPERATION
(a) Check that air flows from port E to the filter.
(b) Apply battery positive voltage across the terminals.
(c) Check that air flows from port E to F.
If operation is not as specified, replace the VSV.
5. REINSTALL VSV

SF0HO-01
P11346
No.1 Air HoseEngine Wire
VSV Assembly
Air Hose
Air HoseVSV Connector
for Waste Gate
Valve VSV Connector
for Exhaust Gas
Control ValveBracket and
VSV for Exhaust
Gas Control Valve
VSV for Waste
Gate Valve SF-62
- SFI (2JZ-GTE)VSV FOR WASTE GATE VALVE
1388 Author
: Date
:
1997 SUPRA (RM502U)
VSV FOR WASTE GATE VALVE
COMPONENTS

SF0HP-01
P11378
Continuity
Ohmmeter
P11379
No Continuity
Ohmmeter
P11380
Air
E
F
P11381
Air
E
F
Battery
- SFI (2JZ-GTE)VSV FOR WASTE GATE VALVE
SF-63
1389 Author
: Date
:
1997 SUPRA (RM502U)
INSPECTION
1. REMOVE VSV ASSEMBLY
2. INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 22 - 26 W at 20°C (68°F)
If there is no continuity, replace the VSV.
3. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
4. INSPECT VSV OPERATION
(a) Check that air does not flow from port E to F.
(b) Apply battery positive voltage across the terminals.
(c) Check that air flows from port E to F.
If operation is not as specified, replace the VSV.
5. REINSTALL VSV ASSEMBLY

SF0HQ-01
P11347
No.1 Air HoseEngine Wire
VSV Assembly
Air Hose
Air HoseBracket and
VSV for Waste
Gate Valve
VSV for Exhaust
Gas Control Valve
VSV Connector
for Exhaust Gas
Control Valve
VSV Connector
for Waste Gate
Valve SF-64
- SFI (2JZ-GTE)VSV FOR EXHAUST GAS CONTROL VALVE
1390 Author
: Date
:
1997 SUPRA (RM502U)
VSV FOR EXHAUST GAS CONTROL VALVE
COMPONENTS

SF0HR-01
P11382
ContinuityOhmmeter
P11383
No ContinuityOhmmeter
P11415
Filter Air
E
P11384
FAir
E
Battery
- SFI (2JZ-GTE)VSV FOR EXHAUST GAS CONTROL VALVE
SF-65
1391 Author
: Date
:
1997 SUPRA (RM502U)
INSPECTION
1. REMOVE VSV ASSEMBLY
2. INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 38.5 - 44.5 W at 20°C (68°F)
If there is no continuity, replace the VSV.
3. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
4. INSPECT VSV OPERATION
(a) Check that air flows from port E to the filter.
(b) Apply battery positive voltage across the terminals.
(c) Check that air flows from port E to F.
If operation is not as specified, replace the VSV.
5. REINSTALL VSV ASSEMBLY