navigation system TOYOTA SUPRA 2020 Accessories, Audio & Navigation (in English)

41-1. NAVIGATION
Supra_Navi_(U)
1-1.NAVIGATION
This chapter describes all stan-
dard, country-specific and
optional features offered with
the series. It also describes fea-
tures that are not necessarily
available in your vehicle, e. g.,
due to the selected options or
country versions. This also
applies to safety-related func-
tions and systems. When using
these functions and systems,
the applicable laws and regula-
tions must be observed.
The navigation system can
determine the precise position
of the vehicle with the aid of sat-
ellites, and can reliably guide
you to every entered destina-
tion.
Navigation data is stored in the
vehicle and can be updated
from a USB storage device.
1 Press the button on the
Controller.
2 "Navigation"
Over view
Vehicle features and
options
General information
Calling up the navigation
system
Safety information
WA R N I N G
●Operating the integrated infor-
mation systems and communi-
cation devices while driving can
distract from traffic. It is possible
to lose control of the vehicle.
There is a risk of an accident.
Only use the systems or
devices when the traffic situa-
tion allows. As warranted, stop
and use the systems and
devices while the vehicle is sta-
tionary.
●There can be deviations
between the current traffic situa-
tion and details of the navigation
instructions, for instance
changed streets or road con-
struction. There is a risk of an
accident. The respectively valid
traffic rules ta ke precedence.

51-1. NAVIGATION
Supra_Navi_(U)
1
NAVIGATION
This chapter describes all stan-
dard, country-specific and
optional features offered with
the series. It also describes fea-
tures that are not necessarily
available in your vehicle, e. g.,
due to the selected options or
country versions. This also
applies to safety-related func-
tions and systems. When using
these functions and systems,
the applicable laws and regula-
tions must be observed.
Destination guidance is started
to the town/city center if no
street is entered.
1 "Navigation"
2 "Enter address"
3 "State/Province?"
4 Select the country from the
list. The address can be entered in
any order.
1
"City/Postal code? "
2 Enter the town/city.
The list is narrowed down further
with each entry.
3 Select the symbol.
4 Move the Controller to the
right to select the town/city
from the list.
5 If necessary, enter the street.
6 Select the street as you
would the town/city.
7 If necessary, enter a house
number.
8 Select the symbol.
9 Select a house number or
range of house numbers from
the list.
"Start guidance " or Add inter-
mediate destinations, refer to
page 11.
Destination input
Vehicle features and
options
Entering a destination via
address
General information
Selecting the state/prov-
ince
Entering the address
Concept
Example: entering the
address via the town/city
Starting destination guid-
ance

61-1. NAVIGATION
Supra_Navi_(U)
The previous destinations driven
to are stored automatically.
1"Navigation"
2 "Recent destinations"
3 Select the destination.
1 "Navigation"
2 "Recent destinations"
3 Highlight the destination.
4 Press the button.
5 "Delete destination" or
"Delete all recent destina-
tions "
Depending on the equipment,
Points of Interest and addresses
can be searched for by entering
a sequence of letters or by
searching in the navigation data
stored in the vehicle. All entries
are displayed that include this
text string. It is possible to search simulta-
neously by town/city and street.
To do this, enter a text string for
the town/city, then a blank space
and a text string for the street
name.
1
"Navigation "
2 "Enter new destination"
3 "Quick search "
4 Enter at least three letters or
characters.
5 Select the symbol, if
needed.
Results are displayed in a list.
6 Move the Controller to the
right.
7 Select desired destination.
 Instructions for the voice acti-
vation system, see vehicle
Owner's Manual.
 When making a destination
entry by voice, you can
change between voice opera-
tion and Toyota Supra Com-
mand.
 To have the available voice
commands readout loud:
Recent destinations
General information
Calling up destination
from recent destinations
Deleting the recent desti-
nations
Quick search
Concept
General information
Calling up quick search
Destination entry by voice
General information

71-1. NAVIGATION
Supra_Navi_(U)
1
NAVIGATION
›Voice commands ‹ or
›Help ‹.
 Complete addresses can be
spoken as a single command,
or countries, towns/cities,
streets and intersections can
be spoken as whole words.
The language of the system
must be set to the language of
the destination country.
 Addresses can be spelled,
even when the configured lan-
guage of the system is differ-
ent. Say the letters smoothly,
and avoid exaggerating the
pronunciation and inserting
lengthy pauses between the
letters.
 You can search for points of
interest for the navigation
online in natural language,
such as with a question for
specific restaurants nearby.
 The options available for
entering data depend on the
navigation data and the coun-
try and language settings.
1 Press the or but-
ton on the steering wheel.
2 ›Enter destination‹ 3
Wait for a request from the
voice activation system.
4 Say the address in the sug-
gested order.
5 Continue making the entry as
prompted by the voice activa-
tion system.
If necessary, individually name
the separate parts of the
address, for instance the
town/city.
The home address must be
stored.
1 "Navigation "
2 "Enter new destination"
3 "Home address "
1 "Navigation "
2 "Enter new destination"
3 "Set home address"
4 Enter the address and possi-
bly a name and further
details.
Saying the entries
Entering an address in a
command
Home address
General information
Using the home address
as the destination
Defining the home
address

101-1. NAVIGATION
Supra_Navi_(U)played if these ha
ve been checked
as destinations from among the
Contacts. Check the address as a
destination, refer to page 67.
4 Select a contact.
5 Select the address.
6 "Start guidance "
Destinations can be entered
directly using GPS coordinates.
Enter the coordinates in
degrees, minutes and seconds
or as decimal values.
1 "Navigation"
2 "Enter new destination "
3 "GPS coordinates"
4 "Format "
 "Degrees Minutes Seconds "
 "Decimal "
5 "Longitude " or "Latitude "
6 Turn the Controller until the
desired degree indication
and point of the compass are
displayed.
7 Press the Controller. 8
Enter the values for minutes
and seconds and direction, if
needed.
9 "Accept destination "
Concierge provides information,
for instance about hotels and
restaurants. Addresses can be
transmitted directly to the navi-
gation system.
1 "Navigation "
2 "Enter new destination"
3 "Concierge "
A voice connection to the Con-
cierge service is established.
Destination entry using
GPS coordinates
Concept
General information
Opening
Destination entry via Con-
cierge
General information
Calling up the Concierge

111-1. NAVIGATION
Supra_Navi_(U)
1
NAVIGATION
This chapter describes all stan-
dard, country-specific and
optional features offered with
the series. It also describes fea-
tures that are not necessarily
available in your vehicle, e. g.,
due to the selected options or
country versions. This also
applies to safety-related func-
tions and systems. When using
these functions and systems,
the applicable laws and regula-
tions must be observed.
When planning a trip, several
intermediate destinations can be
entered.
1 "Navigation"
2 "Map "
3 Move the Controller to the
left, if needed.
4 "Guidance"
5 "Enter new destination "
6 Select a single destination.
7 Enter an intermediate desti-
nation.
8 "Start guidance" Before entering an intermediate
destination, an individual desti-
nation must be set.
A maximum of 30 intermediate
destinations can be entered for
one trip.
1
"Navigation "
2 "Add intermediate destina-
tion "
3 Select the type of destination
entry.
4 Enter an intermediate desti-
nation.
Alternatively, the intermediate
destination can also be entered
using the map:
1 "Navigation "
2 "Map "
3 "Guidance "
4 "Add intermediate destina-
tion "
5 Select the type of destination
entry.
6 Enter an intermediate desti-
nation.
The intermediate destination is
entered in the destination list
and is highlighted.
Trip
Vehicle features and
options
General information
New trip
Intermediate destinations
General information
Entering an intermediate
destination

121-1. NAVIGATION
Supra_Navi_(U)
1"Navigation"
2 "Map "
3 "Guidance"
4 Select the intermediate desti-
nation.
5 Select desired setting:
 "Skip destination ": skip the
current intermediate destina-
tion.
 "Start guidance ": start desti-
nation guidance to the inter-
mediate destination.
 "Change order ": move the
intermediate destination
within the list.
 "Delete destination ": delete
the intermediate destination.
Up to 30 trips can be stored in
the trip list. If necessary, delete
existing trips to be able to store
new trips.
1 "Navigation"
2 "Map "
3 "Guidance" 4
"Save trip"
5 Enter the name.
6 Select the symbol.
1 "Navigation "
2 "Tr i p s "
3 "My trips"
4 Select a stored trip.
5 "Edit trip" or " Start guid-
ance"
1 "Navigation "
2 "Tr i p s "
3 "My trips"
4 If necessary, highlight the
desired trip.
5 Press button.
6 "Delete all trips " or "Delete
trip "
The last

trip is automatically
stored and can be called up
again.
Adjusting the intermedi-
ate destinations
In the Professional navi-
gation system: stored
trips
General information
Storing
Selecting
Deleting
In the Professional navi-
gation system: last trip
General information

131-1. NAVIGATION
Supra_Navi_(U)
1
NAVIGATION1 "Navigation"
2 "Tr i p s "
3 "Last trip created "
4 Select another intermediate
destination, if needed.
5 "Edit trip" or " Start guid-
ance" This chapter describes all stan-
dard, country-specific and
optional features offered with
the series. It also describes fea-
tures that are not necessarily
available in your vehicle, e. g.,
due to the selected options or
country versions. This also
applies to safety-related func-
tions and systems. When using
these functions and systems,
the applicable laws and regula-
tions must be observed.
1
"Navigation "
2 "Map "
The map can be used via Toyota
Supra Command.
Basic entry explanation, refer to
the Owner's Manual for the vehi-
cle.
Opening
Map
Vehicle features and
options
Opening the map
The map can also be
accessed directly with
the button on the Con-
troller.
Overview
General information

161-1. NAVIGATION
Supra_Navi_(U)
1"Navigation"
2 "Map "
3 Move the Controller to the
left.
4 "Route"
5 Select the desired setting.
6 If necessary, select general
routine criteria: " General
route settings "
■Concept
If possible, alternative routes
are suggested during active
destination guidance.
■Displaying alternative
routes
1 "Navigation"
2 "Map "
3 Move the Controller to the
left.
4 "Route"
An overview showing the current
route and the suggested alternative
routes is displayed. In addition,
details such as travel time and
route length, and information about
consumption for the alternative
routes compared to the current
route may be displayed, if required.
The routes are shown in color on
the split screen.
5 Select an alternative route in
order to apply it to the desti-
nation guidance.
■General information
Online alternative routes are
transmitted online to the vehicle.
Information about traffic obstruc-
tions and forecasts are taken
into account for this.
Symbol indicates online alter-
native routes.
If the dynamic destination guid-
ance has been activated along
with the online alternative
routes, available online alterna-
tive routes are automatically
adopted in the destination guid-
ance.
■Activate/deactivate online
alternative routes
1 "Navigation "
2 "Settings"
3 "Route settings "
4 "Online routes "
During destination guidance,
more detailed information about
the current route can be dis-
With destination guidance
active: changing route crite-
ria in the map view
Alternative routes
In the Professional naviga-
tion system: online alterna-
tive routes
Route details
Concept

171-1. NAVIGATION
Supra_Navi_(U)
1
NAVIGATION
played and the route can be
adjusted.
Depending on the equipment,
different views of the route are
available during destination
guidance:
 List of route sections, refer to
page 17.
 Map view, refer to page 14.
 Destination guidance notes
on the map, refer to page 21.
 In the Professional navigation
system: Arrow view in the split
screen, refer to page 27.
 Arrow view in the instrument
cluster.
 Depending on how the vehicle
is equipped, arrow view in the
Head-up Display.
■Concept
When destination guidance is
activated, a list of route sections
can be displayed.
■General information
The distance to be driven per
route section is displayed. If
needed, gas station recommen-
dations are displayed as well.
■Displays
1 "Navigation"
2 "Map " 3
Move the Controller to the
left.
4 "Route "
5 "Route details "
6 Highlight route section.
The route section is displayed on
the split screen.
■Concept
A new route can be calculated
for a route section.
■Setting a detour
1 "Navigation "
2 "Map "
3 Move the Controller to the
left.
4 "Route "
5 "Change route "
6 "Detour: "
7 Turn Controller until the
desired distance before
returning to the original route
is displayed.
8 Press the Controller.
■Resuming the original route
1 "Navigation "
2 "Map "
3 Move the Controller to the
left.
4 "Route "
5 "Change route "
General information
List of route sections
Bypassing a section of the
route