audio TOYOTA tC 2013 Accessories, Audio & Navigation (in English)

17
17
Changing the Frequency
Manually
Touch [] and then, after chang-
ing the MULTI KNOB to Tune/Scroll
mode, turn the MULTI KNOB to the
right to increase the frequency and
to the left to decrease the frequency.
• If the volume fluctuates, touch []
to change to the Tune/Scroll mode,
where you can change the frequency.
Searching for Frequencies That
Can Be Tuned In
Touch either [] or [] to search
in either ascending or descending
order for stations that can be tuned
in. When a station is detected, that
station will be tuned in.
If you press down on either of these
for 1.5 seconds or longer, even with
frequency loops, the SEEK function
continues to operate (Non-stop SEEK
function). If you release either during
operations of the Non-Stop SEEK
function, the SEEK function will take
over.
For FM, the PT Y select function is
activated when the PT Y genre is
established. However, when the
Non-Stop SEEK function is active,
the PT Y selection function is can-
celed.
•
• Listening to Preset Channels
Touch [Presets] to display the Preset
screen. Touch on any channel
from 1 to 6 on the Preset screen.
Frequencies recorded on the preset
channel will be tuned in.
Touch [>>] to switch the display to the
next preset page, and [<<] to switch
the display to the previous preset
page.
The pages change in the order of AM
d FM1
d FM2 d SAT1 d SAT2 d
SAT3 ( d Return to AM). (SAT is only
displayed when the SAT unit is con-
nected.)
Recording the current frequency
on the preset channel
Touch any channel from 1 to 6 on
the Preset screen, continuing to
touch the channel for 1.7 seconds or
longer.
NOTICE
You can store up to 6 stations
per band.
Temporarily Muting the Sound
Touch [] to temporarily mute the
sound. Touch [] to resume audio
output.
•
•
• Searching for Frequencies That
Can be Tuned In (Only for FM/
HD Radio / XM Satellite Radio)
Touch [SCAN] to search for frequen-
cies that can be tuned in. Audio
output will be produced in 5 -second
snippets for stations that have been
located. If you touch on [SCAN]
again during the time of the audio
output from the station you want to
listen to, that station will be tuned in.
When setting the PT Y genre, audio
from stations applicable to the PT Y
genre that has been set up is output
continuously in 5 -second snippets. If
you again touch [SCAN], the broad -
cast being output will continue to be
tuned in and you will be able to select
a PT Y genre. If you loop the search for
stations without touching [SCAN], a
beeping sound will be emitted and the
last radio station to be picked up will
be tuned in and then you will be able
to select a PT Y genre (Only for XM
Satellite Radio). Audio broadcasts cor-
responding to the current categories
are continuously output in 5 -second
snippets. If you touch [SCAN] again,
you will continue to receive the broad-
cast being output. If you loop the
detection of stations without touching
[SCAN], you will hear a beeping sound
and the last station to be received will
be tuned in.
•

0
0
Listening to the
HD Radio broadcast
HD Radio™ Technology is a
terrestrial digital radio broadcast
that utilizes AM/FM analog
broadcasting frequencies to
transmit digital signals.
For information regarding viewing
methods, refer to Listening to
the RADIO (page 16). This section
contains explanations solely
regarding HD Radio broadcast
functions.
About HD Radio™ broadcasting
HD Radio™ broadcasting is high quality
audio and data services. HD Radio broad-
casting is brought to you by your local
FM/AM stations.
HD Ra d

io broadcasting features the fol-
lowing:
• High quality audio• FM multicasting• Data services

3
3
NOTICE
An additional Genuine Toyota
satellite receiver and antenna
must be purchased and installed
to listen to Satellite radio
broadcast in your vehicle.
NOTICE
An XM Satellite Radio sub-
scription is required to listen to
Satellite radio in your vehicle.
CAUTION
This XM tuner supports Audio
Services (Music and Talk) of
only XM Satellite Radio and
*Text Information linked to the
respective Audio Service.
*Text Information includes,
Station Name, (Artist) Name,
(Song) Title and Category
Name.
Sirius XM Satellite Radio
Inc. is solely responsible for
providing services over the air
to XM receivers.
•
•
CAUTION
This XM tuner is awarded
a Type Approval Certificate
from XM Satellite Radio Inc.
as a proof of compliance for
the services XM Satellite
Radio provides.
•
How to subscribe to
XM Satellite Radio

NOTICE
All fees and programming
are the responsibility of XM
Satellite Radio and are subject
to change.
Listeners can subscribe by visiting
the website at
w w w.siriusxm.com or by calling
Listener Care toll-free at
(86 6

)-635- 3  9.
Customers should have their
RADIO ID ready. Display the RADIO ID
Each XM tuner is identified with a
unique RADIO ID. You will need the
Radio ID when activating XM service
or when reporting a problem.
How to display RADIO IDIf you select CH 000, the ID
Code is displayed.
Select the Channel Number
zero (000) by turning the MULTI
KNOB or pressing it to the lef t
or right.
The RADIO ID is displayed as 8
alphanumeric characters.
Record your ID Code below
ID CODE ___ ___ ___ ___ ___ ___ ___ ___
NOTICE
If you select another Channel,
display of the ID Code is
canceled.
•

6
6
Listening to a MP3/
WMA Disc and USB
Portable Audio
Player/USB Memory
Explanations regarding how to
use your MP3/ WMA disc and USB
PORTABLE Audio Player/USB
Memory are contained below.
Details regarding MP3 and WMA
file
s (page 6 ).
CAUTION
Compact disc players use an
invisible laser beam which
could cause hazardous radiation
exposure if directed outside
the unit. Be sure to operate the
player correctly.

7
7
Handling MP3/WMA discs
Load a MP3/ WMA disc in the disc
slot.
The MP3/ WMA disc will begin to
play.
Removing the MP3/ WMA disc
Press [
].
About handling the USB
portable audio player/USB
memory
• For information on USB portable
audio player/USB memory restric-
tions, refer to page 66 “USB port-
able audio player/USB memory
compatibility”.
• Fo r i

nformation on restrictions on
folders in the USB portable audio
player/USB memory, refer to page
65 “About folders and MP3/ WMA
files”.
•
• Connecting the USB portable
audio player/USB memory
•
Connect the USB portable audio
player/USB memory to the USB
port of the USB connector.
• Fo r i

nstructions on connect-
ing and disconnecting the iPod,
refer to page 31 “Connecting
the iPod (iPhone)” and page 32
“Disconnecting the iPod (iPhone)”.
Playing MP3, WMA Disc and
USB Portable Audio Player and
USB Memory Files
Touch [] to playback either an
MP3 disc, a WMA disc and USB
portable audio player or the USB
memory.
Selecting a File
Any of the methods described below
can be used to select files from an
MP3 disc, a WMA disc and USB
portable audio player or the USB
memory.
Selecting the previous/next file
Touch [
] to return to the begin-
ning of the file that is being played.
Touch [
] again to play the previ-
ous file.
Touch [
] to play the next file.
•
•
•A quick method for selecting the
previous/next file
Touch [
] to change the MULTI
KNOB to Tune/Scroll mode, then
turn MULTI KNOB to the left to
begin playback of the previous file.
Turning MULTI KNOB to the right will
begin playback of the next file.
• If the volume changes, touch []
and then turn the MULTI KNOB back
and forth.
Selecting files from the list
Touch [Files] and then select the
song you want to listen to by touch-
ing on it.
Touch [Folders] to display the folder
list.

8
8
Playing MP3, WMA Disc and
USB Portable Audio Player and
USB Memory Files in Random
Order
Each time you touch [RAND], MP3,
WMA disc and USB portable audio
player and USB memory files are
played back as described below.
Normal playback d Files in the folder are
played in random order d All files on the
disc are played in random order ( d Normal
playback)
Repeating Files
Each time you touch [RPT], MP3,
WMA disc and USB portable audio
player/USB memory files are played
as described below.
Normal playback d Playback of files is
repeated d Files in the folder are played in
random order* ( d Normal playback)
* If the random function is available,
this is skipped.
Pausing Playback of Files
Touch on [] while the file is
playing. Touch it again and playback
resumes.
•
•
•Touch [] while the list is being
displayed and then after setting
the MULTI KNOB to Tune/Scroll
mode, turn MULTI KNOB to the left
to move the cursor to the previous
song. Turning MULTI KNOB to the
right will move the cursor to the next
song.
Press the POWER button to play the
song that has been selected.
• If the volume changes when you turn
the MULTI KNOB, touch
[
] and then go through the same
procedures.
Scrolling through the pages of the
list
Touch [
] while the list is being dis-
played to display the previous page.
Touch [
] while the list is being dis-
played to display the next page.
Returning from the list display to
the display for the file that is being
played
Touch [
]. Touch [] or [] when the names
of all the songs will not fit on the list
display to display letters in a scrolling
format.

31
31
Connecting the iPod
(iPhone)
Connect the USB connector.
Connect the iPod as indicated in
the figure below using an optional
cable.
Push the Dock connector into the
Dock connector port until you
hear a click to connect firmly. If it
does not go in smoothly, it may be
upside down so do not force it in
as this may result in damage.
To the vehicle's
connector
*3
*1
USB port
*2Jack port
Dock
connector iPod (iPhone) with Dock
connector port
When connecting the iPod, remove
a headphone cable from the iPod.
When connecting the iPod, it is
recommended to use a separately
purchased car kit.
*1
It is recommended to use a USB
cable which satisfies USB 2.0
standards.
(Measurements should satisfy USB
2.0 standards.)
*2 Fo

r United States model only.
Vehicle AUX jack will not function
as a AUX input.
*3 Co

nnection location differs depend -
ing on the vehicle.
Vehicle
type Connection location
tC Connect to the connector near the shift knob.
xB Connect to the connector near the parking brake.
xD Connect to the connector near the cup holder.
iQ Connect to the connector near the shift knob.
FR-S Connect to the connector near the shift knob.
As soon as the iPod is connected, its
power is automatically turned on.
While the iPod is connected to this
unit, indicates that an accessory
has been connected to the iPod. When the ignition switch is set
to ACC or ON, the iPod’s battery
is charged while the iPod is
connected to this unit.
You cannot use the iPod’s remote
control at the same time.
You may hear noise if you
disconnect during iPod playback.
NOTICE
To resolve most problems
when using your iPod with
the Scion Audio system,
disconnect your iPod from the
vehicle iPod connection and
reset it.
For instructions on how to
reset your iPod, refer to the
User Guide of your iPod.
Connect the Dock connector
directly to the iPod with
Dock connector port. Do not
connect it via the iPod Dock or
other connection.
When the iPod is connected
to this unit, sound will also be
heard from the headphone of
the iPod.
Disconnect the headphone
from the iPod before use.
•
•
•
•
•
•
•
•

3
3
NOTICE
If you install an audio system
other than a Scion Genuine
Audio, you will not be able to
use the USB connector.
If the iPod does not operate
with Scion Audio system,
disconnect the connector from
the iPod and reconnect again.
When you are using iPhone by
the multitasking, according to
the application under use, it
might not be able to charge a
battery.
When connecting a Bluetooth
enabled iPod via the Dock
connector, the iPod or
Pandora
® may not produce
any sound on this unit. If
this happens, turn the iPod
Bluetooth function off.
•
•
•
•
NOTICE
If this product does not recognize
or otherwise behaves erratically
when an iPod/iPhone that has
been updated with the latest
software/firmware (iTunes) is
connected, follow the steps
below.
1. Disconnect the iPod/iPhone cable and then reconnect it.
2. Turn the iPod/iPhone off and then turn the device back on
again.
3. Disconnect the cable from the iPod/iPhone and reset them.
After starting up the iPod/
iPhone, connect the product
using a cable.
Disconnecting the iPod
(iPhone)
Remove the connector.
When disconnecting the iPod
connector, grasp the connector
firmly and pull it towards you.

3
3
Selecting songs from the playlist
Touch [Browse] to display the playlist
table.
Touch on the playlist using any of
tabs indicated below and then select
a method for searching for songs.
Touch [<<] or [>>] to display the pre -
vious/next tabs.
If you touch [
] when the list is
being displayed and then, after set-
ting the MULTI KNOB to Tune/Scroll
mode, turn the MULTI KNOB to
the left, the cursor will move to the
previous column. If you turn MULTI
KNOB to the right, the cursor will
advance to the next column.
Press the POWER button to select
the column that the cursor is posi-
tioned at.
• If the volume changes when you turn
the MULTI KNOB, touch
[
] and then go through the same
procedures.
Tab Action when selected
[Playlists] Switches over to
the screen used for
searching for playlists
Touch [Playlist Name]
to display a list of
the playlists that
have been saved to
the iPod. Touch on
a playlist to display
a list of the songs
contained in the
playlist.
[Artists] Switches over to the screen for searching
for artists
Touch [Artist Name] to
display a list of artist
names. Touch on the
artist name and then
the artist album name
to display a list of the
songs contained in
the album.[Albums] Switches over to the screen for searching
for albums
Touch [Album Name]
to display a list of
album names. Touch
on the album name
to display a list of the
songs contained in
the album.
[Songs] Switches over to the screen for searching
for song names
Touch [Song Name] to
display a list of song
names.
[Podcasts] Switches over to the screen for searching
for Podcasts
Touch [Podcast
Name] to display a list
of Podcast names.
Touch on a Podcast
name to display a list
of files names.
[Audiobooks] Switches over to the screen for searching
for Audiobooks
Touch [Audiobook
Name] to display a list
of Audiobook names.

36
36
Listening to the
Bluetooth Audio
In order to listen to Bluetooth
audio on this unit, you must first
hook Bluetooth audio up to the
system. An explanation regarding
how to listen to Bluetooth audio is
contained below.Bluetooth audio that can be
hooked up to the system
These are the requirements for
Bluetooth audio:
• Blu e
tooth device that loads A 2DP.
• Bluetooth Specification Version 1.1
or higher ( Version 2.1+EDR recom-
mended).
The number of Bluetooth devices
that can be registered is a total of
five units with phones and portable
devices together. It will be counted
as one unit when a phone and port-
able device is the same device.
•